Used Weiler Lz 300 for sale (179)

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm Ncedpfx Aswwl Izsd Asp total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Nedpfx Asyu R H Nod Aocp Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: good (used), e.g. suitable for a high-performance lead and draw spindle lathe WEILER 300 or others For spindle bores diameter 38 mm Njdpow Sfitjfx Ad Aecp with bracket, draw tube and collets Ø 1, 2, 3, 4, 5, 6 (2x), 7, 8, 9, 10, 11, 13, 14, 16, 18, 19, 20, 21, 22, 23, 25 mm and for square bar □ 6, 8, 10, 12, 16 mm, 1 center punch with collet holder, … Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Nodpfx Asw I A Uxjd Aecp Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm Ncjdsvd Dbnopfx Ad Ajp spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), WEILER LZ 330 / From Educational Facility - Swing over bed: 330 mm - Swing over cross slide: 165 mm - Turning length: 800 mm - Speed range / gearbox: 25-2800 rpm - Automatic longitudinal / face feeds - Spindle bore: 38 mm - 3-jaw chuck - Collet chuck system incl. 20 collets - Multifix incl. 3 tool holders - Copying device - Various accessories - Documentation Dimensions: Nedpfxjxf Uf Nj Ad Ascp LxWxH 1.8x0.7x1.6 meters / Weight: 750 kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm Ncsdpfx Asx D Hz Tsd Ajp • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle-controlled Equipment: - Chip conveyor - Coolant device Nodpfjw A Sqmex Ad Aecp - 3-jaw chuck Ø630 mm - MUTLI-FIX quick-change holder - Live center - Machine light

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Nsdpfsywpciex Ad Ascp

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Ncodpfx Adjxt Ngqo Aep Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 36 mm turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U Ncedpfxordwfzs Ad Ajp tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used!

Condition: good (used), WEILER Lathe COMMODOR B Year of manufacture: 1987 with HEIDENHAIN 3-axis digital readout Center height: 190 mm Center distance: 750 mm Swing diameter over cross slide: 190 mm Spindle bore: 56 mm Spindle speed range: 25–2,000 rpm Number of speed steps: 18 Motor power: 2/4 kW Longitudinal feed: 0.022–0.8 mm/rev Cross feed: 0.011–0.4 mm/rev Number of feeds: 200 Metric thread pitches: 0.3–10 mm Weight: approx. 1,500 kg Dimensions: 2,350 x 1,000 x 1,450 mm Technical data not binding! This machine is ideal for users who require a large spindle bore. Accessories/Equipment: Ncsdpfx Aoxz Rc Njd Aep - 3-axis HEIDENHAIN digital display - Independently adjustable faceplate - Electrically interlocked chuck guard - Multifix toolpost size "B" - Machine lamp - Coolant system - Rear chip guard - 2 emergency stop buttons - Bed stop - Fixed steady rest (as new) - Traveling steady rest (as new) - Röhm 3-jaw chuck - Revolving center - Fixed center - Catch plate - Faceplate Available from March 2026 from Vocational Training Center "Due to its quality and price, this machine is not suitable for private individuals." Condition: good to very good

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears Ncodpfsyuyruox Ad Aop - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders Ncodpfx Ajyg Rfiod Aop - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Nedoyub Spopfx Ad Ajcp Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz Ncodpfjyah Rvex Ad Aep - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout Nsdpfx Adjytd U Re Aocp * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws Ncjdpfoytd Ukjx Ad Ajp * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Ncsdpfx Adjyu Ilis Asp Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Ncodpoyuy D Rsfx Ad Aep Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: Ncodpfx Asyucf Rod Ajp - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Ncjdpfx Ajyucd Ted Aep Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. Ncedpfx Aofhnr Ied Asp We can overhaul a machine from you or deliver a machine from us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2011 Availability: from April-May 2026 Condition: very good, used Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank cross-section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Main spindle internal taper: 5 mm Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Ncedsyw Tkdspfx Ad Ajp Rapid traverse (longitudinal/cross): 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread pitches: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill internal taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: - Collet chuck system - Multifix quick-change tool post - Machine lamp - Coolant system - Machine feet - Original documentation

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz Njdpfxsyr R Dco Ad Aecp - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition