Used Soldering for sale (105)

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Hfedpjthittjfx Afkjb Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 2000W LCH-2000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Hfodpfjx R Dtpjx Afksb

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations Hfjdpex H Ryujfx Afksb volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Hsdpfx Aon Armaefkofb Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2017, condition: used, functionality: fully functional, Manual SMT stencil printer for solder paste for stencils 520 x 520 mm Quick clamping system: SPGEN-SP004-ML (520 x 520 mm) Hedpex Ea Nasfx Afkefb

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Hsdpfx Aext Dq Rsfkofb Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m Hedpfx Afjx A S Txsksfb - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Hjdpfxsu Af Abs Afkjfb

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Hodexzrflopfx Afkjfb Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Condition: used, Year of construction: 2015, Vitronics Soltec myReflow 7038 SMD reflow soldering oven Hedpsuhfm Uofx Afksfb Year of construction 2015 Pin length: 5 mm Pin spacing: 19 mm 10 heating zones 4 cooling zones N2 pressure: 6 bar LP width: 50 mm - 508 mm Max. component height: 40 mm / 30 mm (top / bottom) Transport height: 832 - 914 mm Width adjustment: electrical Software version: 4.0.6.b

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Hfedexzug Sjpfx Afkjb Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower Hfedpfjxrgl Isx Afksb - Quick, easy and stable installation thanks to Easy-Click system

Condition: like new (used), Fronius Hfedpspa N Aaofx Afkob used -TPS4000CMT / TransPuls Synergic 4000 CMT R - cooling unit FK4000-RFC (4,045,837,632) water cooled - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min Hsdpfxsxfvldj Afkefb frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Year of construction: 2014, condition: good (used), EKRA Stencil Printer Serio 4000 Year of manufacture: 2014 Print format: min. 80x50 mm, max. 510x510 mm Substrate thickness: 0.2 to 6 mm Stencil size: min. 450x450 mm, max. 800x900 mm Repeat accuracy: +/-12.5 µm Hjdpexxk Eljfx Afksfb IQUESS steel squeegee 2 1/2 D inspection Adjustable transport width iPAG jet dispenser (with heating) Solder paste dispenser for cup diameter 53 mm, 57 mm, and 64 mm Paste level control EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored according to product requirements and production options Traceability Temperature control (4-12°C) 8 shelves Material dispensing via lift system Handheld scanner

Condition: new, GBS200H-30. 15 kW Connection: 4 x 22 mm solder. All staff speak Dutch, German, and English. Hfsdpfsxqydbex Afksb Prices are excluding VAT Shipping is possible (surcharge applies) (Subject to changes and errors in technical data, information, and prices. Prior sale reserved)

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke Hsdpfxjxaal Rj Afkjfb - Read the operating instructions before using for the first time

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Hjdpfjxp H Ttjx Afkofb Including power cable.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Max. air flow rate 2900 m³/h Inlet diameter 200 mm Max. negative pressure 3500 Pa Drive power 4.0 kW Filter area 24 m² Filter elements 2 pcs. Dust collection bin 38 l Dimensions 1,660 x 840 x 1,640 (L/W/H) mm Hjdpexnrxxefx Afkofb Weight 310 kg Sound pressure level 72 dB(A) Metal chips Metal dusts Plastic dusts Plastic chips Cotton dusts Paper dusts Welding fumes Soldering fumes

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD Hjdpfx Asrzvw Tofkjfb -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Condition: new, 2500 m³/h 2500 kPa volume capacity 1600 m³/h feed volume > 99 % 1,1 kW 72 dB(A) 0,58 x 0,58 x 0,9 m 80 kg 230 V / 50 Hz V Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Hjdpfx Ajgvq E Djfkefb Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor Hedpfjqwprgjx Afkefb -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h Hjdpfx Afjhmqm Iekofb -Extraction arm: O 160 mm x 4200 mm -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm Hfsdpsd E Tftofx Afkob -Weight: 192 kg

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg Hjdehtn Sbspfx Afkofb