Used Bench Scales for sale (4,321)

Condition: used, This listing is for a Solent Scales Weight Set. The unit is in full working condition and is ready for immediate release. Weight Range from 1g - 500g Ksdoxxzbwopfx Ab Todh Supplied in wooden box

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator Ksdpfx Ajx Il Ntjb Tedh M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm.

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Kedpfox Hz Dqox Ab Todh Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: excellent (used), Double bench grinder Ksdek Iwx Eopfx Ab Todh

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, 1 x ActionPac Scales & Automation single-head linear weigher with drop-through metal detector. Supplied with pneumatic foot-pedal for manual depositing. *PLEASE NOTE - THE LINEAR WEIGHER REQUIRES NEW CONTROL PANEL SCREEN* Syntron Magnetic Feeder - F-T01-A. Linear weigher: Model - ME109CM. Serial number - 4284. Date of manufacture - 2014. Weighing range - 28g to 2268g (typically). Feeding pan - smooth, for solid and small granular products. Electrical requirements - 1 phase. Metal detector: Model - IMD-I gravity drop-through. Aperture - 180mm diameter. Electrical requirements - 1 phase. Overall dimensions - 1420mm long x 975mm wide x 3200mm high. Previously used to weigh and pack coffee beans and granules. Cost of new control panel - $2,700 (quoted by manufacturer). Kdjdpfxsxv A Ito Ab Toh

Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Graduation reading: 100 g Platform size: 1250 x 950 mm Platform height above floor: 230 mm Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Kodpfxodqw R Rs Ab Tsdh Weight: 270 kg

Condition: excellent (used), Sartorius Combics 3 platform scale Stainless, platform scale with ramp, weigh range 1Kg to 300Kgs, platform 1000mm x 1000mm, 1Ph Kjdpfxsyifqio Ab Tjdh

Condition: used, length ca. 1500 mm width ca. 700 mm height over floor ca. 840 mm 2 St. Kedpfx Abjylcqbe Tedh With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Mobile on casters, casters can be lowered so that the table remains stable when working

Condition: used, length 1200 mm Kedpoylcp Djfx Ab Tjdh width 600 mm height 840 mm 6 St.

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Kdsdpfx Abjx E Rx Ue Tjh Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Weight: kg Required space: 700 x 400 x 1100 mm

Condition: ready for operation (used), Year of construction: 2019, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Ksdpfex E Rw Dox Ab Tedh Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight approx.: 34 kg Required space: 500 x 250 x 1150 mm

Condition: ready for operation (used), Year of construction: 2014, Grinding wheel diameter: 200 mm Kjdpjx E Rxhofx Ab Tsdh Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight: 34 kg Required space: 500 x 250 x 1120 mm

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping Kdsdpfx Abswd Szbj Tsh - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm Kdjdpfxodzqmhj Ab Tsh speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: used, Electronic crane scale MWT type 142 Make No.: 142571 Year of construction 1993 Tensile force measuring device, crane scale Measuring range: 2.500 to 80.000 kg Kodpfxsg D H Rie Ab Todh Smallest measured value: 20 kg Power supply via 12 Volt accumulator - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very massive and high quality body made of steel own weight: approx. 200 kg

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 Kdedpfxjf Axn As Ab Tjh - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame Kodpod Dc Unsfx Ab Tedh - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen Kdodpfx Aoya Ahveb Tjh - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 25.0 / 30.0 mm throat 150 mm bore stroke 120 mm threading M18 / M22 spindle taper 3 MK table: 300 x 270 mm turning speeds 200 - 4.000 U/min column diameter 100 mm total power requirement 0.75 / 1.1 kW weight 170 kg range L-W-H 800 x 500 x 1400 mm from a training workshop (!!) New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed Kodpfxoxaamzj Ab Todh - Height-adjustable work table, using a hand crank - adjustable drilling depth stop

Year of construction: 1999, condition: good (used), Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 Kjdpfx Abeykpagj Tedh -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit

Year of construction: 1998, condition: good (used), Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 Kodpfx Aoykn R Dsb Tjdh -Weighing range: up to max. 2000 kg -Load cell: 4x Tedea-Huntleigh 500 kg -Dimensions: 1500/600/H80 mm -Weight: 80 kg

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN TFT 19" Screen HEIDENHAIN Package (motors, measuring systems, and handwheel) Kjdpfoq I Ncqjx Ab Tsdh X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary Table: 1,600 x 1,200 mm Maximum Workpiece Weight: 6,000 kg Automatic Universal Diagonal Swivel Head 1° x 1° (Optionally with fixed quill Ø 210mm) Spindle Taper: SK-50 DIN 69871/A Max. Spindle Speed: 6,000 rpm (oil-cooled) Max. Spindle Motor Power: 53 kW ICS – Internal Coolant Supply – 36 bar Rapid Traverse X, Y, Z: 30 m/min Positioning Accuracy: 0.015 mm Repeatability: 0.010 mm Chain Tool Changer: 40 positions (vertical / horizontal change) 2 x Longitudinal Hinged Belt Chip Conveyors Perimetric Enclosure (open top) Only inquiries from Germany will be answered.

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm Kedpfsq I Nkbox Ab Tsdh V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Ksdpfoxc Hphjx Ab Tjdh Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: new, FACTORY NEW T-TYPE FLOOR BORING AND MILLING MACHINE Control and Drive Technology: HEIDENHAIN TNC 640 digital CNC path control HEIDENHAIN 16" TFT screen HEIDENHAIN package (drive motors, measuring systems, HR 510 handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Kdedpfx Aboq I Nlyj Teh Y-axis (cross ram): 1,500 mm V-axis (cross rail): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swiveling head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverses X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be processed.