Used Bench Planer for sale (4,279)

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Hpedpfx Ajc Uydasf Dsa Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Double bench grinder Hpjdpfxsk Iwx Ej Af Dsa

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Hedpfx Afji Apuhe Depa Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Hodpfx Aou Au I Tef Djpa Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Hedpfx Ajg S Dm Njf Dspa

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Hodpfjl Dw Nxox Af Dopa long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table Hedpowwk Rbefx Af Dspa 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: good (used), Year of construction: 1954, Drilling machine, bench drill, pillar drill, column drill -Table size: 400 mm -Spindle mount: MK4 -Protrusion: 320 mm -Speeds: VIP gearbox 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm Hedsdi Smkjpfx Af Djpa -Feed rate: 0.09-0.28 mm/rev -Tachometer defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: excellent (used), Year of construction: 2006, Planer, Hofmann AHW 511 jointer with 4-knife Tersa cutterhead Maximum planing width: 500mm Maximum cutting depth: 8mm Planing thickness adjustment: manual with scale Concave/bevel joint adjustment: manual with scale Drive motor: 5.5kW with automatic motor brake Tersa 4-knife cutterhead, knives on one side still new Planed cast iron tables, total length approx. 3060mm Slotted table lips Low-noise design Tilting fence with foldable auxiliary fence Suvamatic cutterhead guard Extraction port: 140mm Emergency stop Original paint, only a few spots touched up V-belt replaced Hpedpfsul Admsx Af Dsa CE mark Dimensions approx. 3060 x 1000 x 1100mm (LxWxH). Weight approx. 1100kg. The machine can be demonstrated on-site by prior appointment. We only offer machines that are ready for demonstration in our warehouse – see 'other offers from this supplier.'

Condition: new, Year of construction: 2025, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Hpsdpfxsi Azzko Af Doa Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: used, 1 piece bench drill OPTIMUM OPTIDRILL D23 PRO with vise and table, as shown in the pictures and inspection. Condition: used. Payment method: advance payment by bank transfer. Storage location: workshop. Shipping: Self-collection only – shipping is not offered for this item! Hpjdpox Ifniofx Af Dja

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Surface planer unit 3-knife automatic cutterblock Tilting fence 90° - 45°, anodized Planing width: 310 mm Planing table length: 1400 mm Max. depth of cut: 4 mm Thicknessing planer unit Thicknessing width: 306 mm Thicknessing height: 4 - 225 mm Thickness table length: 540 mm Feed speed: 6 m/min Hsdpfx Afex H Dazo Depa Availability: approx. mid-January 2026

Condition: used, Surface planer Type AH 430 - Year of manufacture: 1992 - 3 kW - 380 Volt - Control panel on top - Total table length: 2750 mm - Planing width: 430 mm Hsdpfex Htb Iex Af Dopa - Tersa 4-knife cutterhead - Table adjustment via handwheel - Motor brake - Extraction hood - Overall dimensions: 2800 x 600 mm

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Hpjdpfox Ifdkox Af Doa Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision cut-off saw with jointing unit (planing unit) and veneer alignment table Robust construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and tight-joint cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Saw and jointing units are combined in a single assembly, requiring movement of only one unit. Hpedpfx Aox Hqtzsf Dja Easy-to-guide saw unit running on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW; Jointing (planing) unit: 1.2 kW Motors can be conveniently switched on via handle—operate only when needed. Fine-cut saw blade with carbide-tipped teeth, sharpened Four-knife planing head, fitted with new carbide reversible knives, spare knives included Practical front veneer storage, extendable for planing unit 100 mm extraction port with extraction duct CE marking Operating manual Basic tool kit included Original paint; only a few spots touched up Approximate dimensions: 5050 x 1700 x 1400 mm (LxWxH). Weight approx. 900 kg. The machine can be demonstrated at our location by appointment. We only offer machines that are ready for demonstration in our warehouse—see “More offers from this provider.”

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg Hpsdpfx Afovkit Ao Dja drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, 1 piece SCM FS410 surface planer/thicknesser with piping, as per photos and inspection, self-dismantling required. Colour: grey. Condition: used. Payment method: advance bank transfer. Storage location: joinery/workshop hall 2. Shipping: Collection only – no shipping offered for this item! Hpjdpfex Ifgfsx Af Dea

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW Hedpfx Afjk Tuwvo Djpa -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Hpsdpfx Asx Hbrnsf Doa Features and Technical Data: - Ideal for demanding craftsmen and cabinetmakers - The especially long, one-piece surfacing tables allow for easy straightening of workpieces - Work tables are made of cast iron, providing durability and long-lasting flatness; simultaneously opening surfacing tables with tension spring support ensure quick and convenient changeover - The permanently mounted extraction hood eliminates the need to relocate the extraction hose when changing modes, saving valuable working time - Helically toothed steel infeed roller ensures consistent and uniform wood feed - Rubber outfeed roller at the thickness planer exit guarantees even wood output - Material feed with four selectable speeds - Thickness table height adjustment via handwheel with integrated thickness display - DIGITAL version: with electric thickness table height adjustment and digital display - On/off switch positioned at the operator station - Powerful industrial motor - Heavy machine weight ensures maximum precision and smooth operation - Prepared for slot mortising unit installation - Quality made in Italy - Equipped with spiral cutterblock - Foldable cutterblock guard - Total table length: 2,250 mm - Maximum planing depth: 5 mm - Working width: 520 mm - Thicknessing height: 3 – 240 mm - Number of cutter blades: 66 - Cutterblock speed: 5,000 rpm - Motor power: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2,250 x 1,440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake - Extractor connection diameter: 120 mm - Motor: 4 kW - Dimensions (L/W/H): 3010x1000x1400 mm Hpodpjxl Umyjfx Af Dsa - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Hpedsx E Rx Uepfx Af Doa Drive motor: 400 V, approx. 1.5 kW Weight: kg Required space: 700 x 400 x 1100 mm

Condition: excellent (used), Electrode clamp with air connection for electrode tool, electrode welding machine, joint planer, joint planer -Manufacturer: Kurt Haufe, Joint Planer Type K 12 B 600 -Cable length: 3 m -hollow cable -Number: 2x joint planers available -Price: per piece -Transport dimensions: Ø 450 x 90 mm Hpjdpfx Afsx E N Uze Doa -Weight: 3.2 kg/pc.

Condition: excellent (used), CATALOG NUMBER 7683 Technical data: - Cutter block width: 510 mm - Number of knives: 4 pcs - Maximum thickness of workpiece on thicknesser: 200 mm - Manual table lift - Maximum thickness of workpiece on side heads (3-sided): 100 mm From above: - Anti-kickback fingers - Feed (infeed) roller, serrated - Pressure bar - Planing (cutter) block - Pressure bar - Outfeed roller, smooth From below: - Adjustable rollers in lower table: 2 pcs - Guide bar From rear: - 2 side spindles + pressure bars - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 25 mm - Includes 2 cutter heads - Spindle adjustment: right/left - Motor: 2×2.4 kW - 2 feed speeds - Extraction port diameter: 2×100 mm - Main motor: 7.5 kW - Overall dimensions (L/W/H): 1850×1250×1000 mm - Weight: 1080 kg ADVANTAGES: – Made in Poland Hjdpfxswtqc Ns Af Dspa – 4-knife cutter block – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAB3 jointing nozzle Hpodpfjfdkgtex Af Dsa -Pressure: 6.0 - 7.0 bar -Price: per piece -Quantity: 14 pieces -Dimensions: 110/25/H25 mm -Weight: 0.1 kg/piece

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar -Price: per piece -Quantity: 6 pieces -Dimensions: 100/19/H19 mm Hpodpfefdkgvox Af Dsa -Weight: 0.1 kg/piece