Used Phrase Bench for sale (2,198)

Condition: good (used), Bench Foods 32VCUD 32 tray vertical dehydrator Stainless, adjustable temperature range from 15'c to 90'c plus an ambient air mode, timer controls, stainless mesh trays for even drying on both sides, mobile, 1Ph Rsdpfx Abeyziiwjwju

Condition: excellent (used), Double bench grinder Rsdpek Iwx Esfx Abwsu

Condition: good (used), Year of construction: 2003, bench drill, pillar drill, column drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel distance: 210 mm -Spindle mount: Drill chuck B16 (1-13 mm) Redpfjk Tuwvsx Abwsu -Protrusion: 180 mm -Speeds: 420 - 2100 rpm continuously variable -Column: Diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380 V -Dimensions: 620/235/H800 mm -Weight: 70 kg

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m weight 130 kg Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest demands! demands! Redpfxozafm Us Abwsu Workbench top 45 mm thick made of high-quality multiplex beech

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m weight 160 kg Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest demands! demands! Rjdpfszafm Isx Abwsu Workbench top 45 mm thick made of high-quality multiplex beech Drawers 1 piece left 1 piece right Cladding right, left rear

Condition: used, LDS V790 Shaker System LDS V790-335T Air-Cooled Vibrator + LDS HPA-K CE Amplifier + Control and testing accessories Professional electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Industrial system for environmental simulation and vibration testing For sale is a used LDS V790 vibration testing system from commercial industrial use. The system is suitable for vibration tests, oscillation tests, environmental simulation, research & development, quality assurance, electronics testing, and industrial endurance tests. LDS Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1500 lbf Random force RMS: approx. 6.67 kN / 1500 lbf Half-sine shock force peak: approx. 26.69 kN / 6000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar / 80 psi Optional air isolation approx. 5.52 bar / 80 psi LDS Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: HPA-K Amplifier Model: HPA K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Design: HPA-K CE power amplifier Suitable for LDS V790 Shaker System Weight: approx. 750 kg Control / Accessories According to the pictures, the system includes, among other things: LDS amplifier unit / control cabinet Control and rack units PC workstation with monitor, keyboard and mouse Cables and connection accessories as shown in the pictures Emergency stop units / safety accessories A functional test under load has not been documented. Inspection and testing on site are possible and desired by arrangement. Condition Used industrial system. Optical condition see pictures. Normal signs of wear and storage are present. Some scratches, paint chips, dirt and signs of use are visible. The system comes from commercial industrial use. All information is provided to the best of our knowledge based on the visible nameplates, pictures and available documents. Scope of delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control / rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Available documents / manual Items not explicitly mentioned are not included in the scope of delivery. Scope of delivery exclusively as shown in the pictures or by arrangement. Transport / Collection Rodoy Uigcepfx Abwju Heavy industrial system. Transport only by a suitable freight forwarder or industrial transport. Collection and loading by prior arrangement. Inspection, testing and re-measurement on site are expressly possible after prior arrangement. Notes on sale Sale exclusively to commercial customers. Used goods from industrial use. Sale without guarantee, without warranty and without return. Errors, intermediate sales and technical deviations are subject to change. All technical specifications are without guarantee. We will gladly answer further questions via message.

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Rjdpfx Absu T Hhkeweu Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: good (used), Year of construction: 1990, Spare Parts Package for CNC Boring Mill Manufacturer: PFEIFER, Model: FK 105 CNC, Spindle Mount ISO 50, Year: 1990. Rsdpfx Abexr Dg Newju 1. Complete ISO 50 Spindle Head 4. Ball screws with nuts for X-Y-Z-W axes.

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° Rodpfx Aou Id Dzebweu base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm Rsdpfx Abeu Id D Uoweu base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: Rodpju N E Evefx Abwsu material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm Rjdpjvc Aytofx Abwsu column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: used, Descriptión: Machine type: AUTOMATIC Rodpfx Aey Tnarsbwou Operating mode : MANUAL/AUTOMATIC Strain: 400 VOLT Frequency : 50 Hz Power adsorbed : 2 Kw Minimum nut dimensions : 1/2” Maximum nut dimensions: 1“ Minimum threading: 67-60 mm Maximum threading: 208 mm Supply pressure : 6-8 bar Cylinders: SMC Three-phase motors : Minimotor PLC: SIEMEMNS S7 Cycle time: 8.5 Seg. Production changeover time(1 person): +/- 15 min. Maximum dimensions of the assembled delivery: 3900x2220x2400H mm Phonometry: 78 dBA

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Rjdsda Nqxspfx Abwju Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Rjdpfx Abscw H Syjweu Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Installation dimensions: 16,000 x 4,000 x 3,400 mm. Rjdpfx Abjy T Ulzowju

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg Redpfoyfwunjx Abweu dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: used, bore capacity in steel (diameter) / mm throat / mm Redpoy Tbv Tjfx Abwou bore stroke 70 mm total power requirement 0,9 kW

Condition: good (used), Drilling capacity: 13 mm Spindle mount: B 16 6 spindle speeds: 410 - 3400 rpm Drilling depth: 60 mm Machine dimensions (L x W x H): 750 x 660 x 1340 mm Weight: 250 kg - Drilling head with adjustable height Rodpfx Abswnfaroweu - Motor with pole changeover - Speed adjustment via V-belt Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm bore stroke / mm BD13M – 5-Spindle Gang Drill / Bench Drill Redey S Dm Sepfx Abwju

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Rsdpfxeyzum Io Abwsu Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Redpfx Aboihmwtjwou Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel distances: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Rjdpfx Abjx A Ayiswsu Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle connection: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 19526ä

Condition: used, 1 unit of FLOTT TBZ16ST bench drill press Redpfxey Th Nye Abwsu 400 volts Color: as shown in the pictures, see pictures and inspection Condition: used

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Rsdpfxjhmmfks Abwsu Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition