Used Belle Bwr 650 for sale (2,973)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder Itodpox S I Umefx Ab Tjd - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: good (used), The scope of delivery includes: 01x compartment divider, used Material color: grey white total length: approx. 775 mm Length tube: 650 mm + 5 mm plastic cap cross section: square tube 20 x 20 mm Iodpfx Asi Eu Dvjb Tstd opening dimension: approx. 103 mm Weight: 0,93 kg | pcs.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel Ijdekn Rz Hepfx Ab Tjtd overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Itjdpfx Aox Uphmsb Ted Width: 700 Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2000, functionality: fully functional, Model Year: 2000 Iedpfxjx T Dips Ab Tetd Width: 700 Length: 400 Height: 500 Number of Axes: 5 Holder: BBT40 Spindle Speed (RPM): 20,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: new, 🧰 Product Features • Condition: new • Colour: grey • Volume: 650 l • Load capacity: 4000 kg (at 5°C ambient temperature) • Dead weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for rack storage, liquid-tight, drain valve optional 💰 Price € 145,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by arrangement Constantly over 5000 linear meters of pallet racks from various manufacturers in stock Itedpfshvrk Tjx Ab Tod (Subject to changes and errors in technical data, information and pricing as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Itodpfx Aboyu If Ne Ted Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm Isdpfx Aoyvzhhsb Tjtd frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: excellent (used), Year of construction: 2006, Technical data Approximate dimensions on site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial number: 161394 Item description Clamping unit Clamping force: 6,500 kN Distance between tie bars: 1,025 × 930 mm Min./max. mould height: 450 / 950 mm Maximum opening stroke: 1,800 mm Isdpoyu Niijfx Ab Tstd Injection unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Electro-hydraulic equipment Rated power of pump motor: 55 kW Heating capacity: 62 kW

Condition: used, overall weight: 3,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 650 Power: 12.5Hp Distance between centers: 2,000mm Maximum swing over bed: 650mm Maximum swing over gap: 820mm Maximum swing over carriage: 390mm Gap length: 310mm Spindle bore: 82mm Number of speeds: 18 (16-1250) Iedpfx Absyc Rucs Tetd Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 320mm 3-jaw chuck with sets of internal, external, and soft jaws - Conventional tool post + quick-change tool post 140x140mm (2 holders) - Closed steady rest 320mm - Closed steady rest 180mm - Open follow rest - Various gears for different thread pitches Weight: 3,000kg

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Year: 2025 Description: - Compensating stacker - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Iedpfx Aboyr E Dke Totd Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t Itjdpovuugiefx Ab Ted weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: good (used), Year of construction: 2008, operating hours: 59,934 h, screw diameter: 45 mm, displacement volume: 318 cm³, ENGEL Victory 650-120 Tech Stock No.: 503240 Manufacturer: ENGEL Model: VICTORY 650-120 Tech Control: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data Clamping Unit Itedpfoytfn Esx Ab Tjd Clamping force: 1200 kN Platen size (H x V): 740 x 680 mm Minimum mold height: 300 mm Maximum daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Tool weight: 825 kg Technical Data Injection Unit Screw diameter: 45 mm Shot volume: 318 ccm Injection pressure: 1525 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 290 min⁻¹ Free shot weight (PS): 220 g/s Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86m x 1.5m x 2.1m Total weight: 7,600 kg Equipment - Display language: German - CEE socket 16A - Hydraulic core pull, 2x - Air valve, 2x - Machine with water battery - Machine without material hopper - Levelling elements - Schuko socket 10A - Tool heating, 8x

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm Ijdpsdcdwbsfx Ab Tetd work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: used, Year of construction: 1990, x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min max. torque on the spindle 3000 Nm spindle drive 30 kW feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 200 mm workpiece length 400 mm weight of tools max. 16 kg tool changing time ca. 8 - 9 sec internal coolant system feed ja / yes weight of the machine ca. 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Itsdpoyt Rwlofx Ab Ted Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration device, electron. handwheel, fixators

Condition: good (used), conveyor belt width: 650 mm, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 45 mm, working width: 650 mm, type of input current: three-phase, Dough Sheeting Machine Fritsch Rollfix 6/650 E Computer control / programmable control Suitable for all types of dough for sheeting and laminating With reel for rolling up Stainless steel construction Mobile machine Isdpfx Aeytz N Eeb Tstd Connection: 400V, 16A-CEE plug Used machine We have more sheeting machines in stock!

Condition: good (used), conveyor belt width: 650 mm, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 45 mm, working width: 650 mm, type of input current: three-phase, Dough Sheeter Fritsch Rollfix 60/650 E Computer control / programmable control for all types of dough for sheeting and laminating with reel for winding Stainless steel construction Isdpfx Asytz H Reb Totd electric flour duster Machine is mobile Connection 400V, 16A-CEE plug Used machine Visit our large bakery machines warehouse!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,163 h, Control Unit Brand Fanuc Model 0i-MF Ijdpfx Ajx D I S Teb Tjtd Main Drive Spindle speed range 20000 rpm Spindle motor power 3.7 kW Tool taper BBT30 Number of axis 3 Movement X-Axis Movement 650 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Table load 500 kg This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, it's ideal for precise machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Een enkelkops, incrementeel mesaangedreven dwarszaagmachine voor het zagen van grote secties, ontworpen voor 90°-sneden. Een belangrijk kenmerk van dit product is de optimale snijkwaliteit, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen Voorbeelden van snijtechnieken: - 600 x 30 mm (maximale breedte van het werkstuk) - 90 x 250 mm (maximale werkstukhoogte) - 300 x 210 mm - 500 x 130 mm - diameter 250 mm Dia saw / abrasive - disk: 650 mm Turningspeeds: 2800 rpm Isdpfxsyq Tv Eo Ab Tjtd Power needed / motorpower: 5,5 kW

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,889 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, battery voltage: 48 V, fork length: 1,200 mm, Equipment: CE marking, Well-maintained forklift. Lift height: 6500 mm. Sideshift, fork positioner. Charger 400V 16A included. Europe-wide transport possible with MEGA trailer. Isdpfxjx Tpvzs Ab Tjtd

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruis Y-beweging of kolom: 650 mm Verticale Z-verplaatsing of freeskop: 3000 mm Horizontale W-verplaatsing of freeskop: 1200 mm Itjdev Sfm Ujpfx Ab Tod Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopondersteuning / ondersteuning van de versteviging van de broche Ondersteuning van boorspindels / ondersteuningsportefeuilleverhogingen Cross traverse Y-axis (table/column): 650 mm (column) Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW Ijdpfx Absx Nr Huo Totd • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) Ijdpfeyli H Ajx Ab Tetd • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Itsdpfx Asyffcaeb Tod Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: ready for operation (used), Year of construction: 2004, overall weight: 5,000 kg, spindle motor power: 21,000 W, number of axes: 4, This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details. • Voltage: 380 V Isdpfx Asypcgqeb Tjtd • Frequency: 50 Hz • Current consumption: 42 A • Maximum operating pressure: 0.8 MPa • Nominal pressure: 0.6 MPa • Maximum air consumption: 200 NL/min Additional equipment • Wireless handheld scanner