Used Wood shredder for sale (344)

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation D7Vxnfk 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: repair required (used), Shredder Hammel NZS 700 E 250 kW The machine needs repair. The electric cabinet is missing. Ugad7Kxpzh

Condition: excellent (used), CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition Net price: PLN 76900 Net price: EUR 17477 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations) Dflla2Pxj

Condition: new, Technical specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm. Number of knives: 14 pieces 2 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns concave / 30 x 30 mm, broaching knives Screen perforation: 15/20 mm Ztgueze3 Paint finish: frame in RAL 5010, hopper in RAL 7016 (HoKuTech standard paint finish) Connected load: 400 V /- 5 % / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (PLC Siemens) Star-delta start Rubber oscillating elements E-rotor with knife pockets milled into the profile Gear limit switch 1. Knife row Hold-down device on pusher for long and large parts Large 40 x 40 mm knives for optimum material feed Very robust gearbox Special broaching knives to prevent lateral jamming Machine number: 510-5238

Condition: good (used), Year of construction: 2006, Open window 250mm x 250mm Bybuspwdg8 Is option to have belt conveyor for in feed. Spare knifes, Engine 55kW(without roller pulley), cyclone for chips is included.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Bz32Flrpue Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Ugac9Rb7I7 very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: excellent (used), Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Q2Mjax02 Net price: 24750 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: new, voltage: 400 V / 50 Hz Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Throughput capacity: depending on material and sieve Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Engine power: 18.5 kW Cutting system: 28 knives 40x40 mm (incl. 2nd row of knives) Bixy2Spg Sieve perforation: 25/30 mm Suction nozzle: 160 mm Dimensions: L = 1,800 mm, W =1,230 mm H = 1,640 mm Weight: approx. 1.300 kg incl.: - autom. star-delta start-up - Control cabinet electronic, completely wired - automatic stop at idle - CE-conform - GS-sign "dust-tested - vibration-damping machine feet - 2nd measuring row = 14 knives 40x40mm - bar magnet length 590mm  

Condition: good (used), Year of construction: 2007, - Hammel NZ 700 E - Year of manufacture 2007 - electric drive 250 kW Hu3Ocrc - with magnet - with metal detector and outlet - with infeed conveyor and outlet conveyor - good condition

Condition: excellent (used), CATALOG NO. 6875 TECHNICAL DATA D8Cbixr9 - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 38614 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1981, used make Weima type R 500 Ccc9Zexlfs year of construction 1981 machine no. 450008 motor 30 kW hopper opening 500 mm x 300 mm rotor width 500 mm sieve hole size 25 mm space requirement approx. 2000 mm x 1000 mm x 2000 mm weight approx. 1000 kg total connected load approx. 30 kW storage location 97447 Gerolzhofen, free loaded, unpacked handover in actual condition as inspected, without guarantee and warranty

Condition: excellent (used), CATALOG NO. 7188 TECHNICAL DATA - inlet width 600mm - inlet height 250mm - shaft width 600mm - shaft diameter 300mm - number of knives 32 pcs - knife dimensions 40x40mm - sieve dimensions 10mm, 12mm - toothed shaft pulling from above - shaft motor approximately 1.1kW - electric autoreverse - outlet for shredded wood, diameter 200mm, diameter 300mm WRR 600 vibratory - power of the vibrochute engine: 1.8 kW - vibrochute length 3050mm - vibrochute width 550mm - main engine 30kW - dimensions of the chipper length/width/height 2000x1600x1100mm - total dimensions of the vibrochute length/width/height 3050x700x750mm - weight 2280kg – German production – used chipper, very good condition Net price: PLN 146900 Rt0Yc9Zg Net price: EUR 33386 Net price calculated at the exchange rate of PLN 4.4/EUR (with larger exchange rate fluctuations, the price may change)

Condition: new, Voltage: 400 V / 50 Hz Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Throughput: material and sieve-dependent Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Cutting system: 28 knives 40x40 mm (incl. 2nd row of knives) Sieve perforation: 20/25 mm Suction nozzle: 160 mm 7Fijeub Dimensions: L = 1.800 mm, W =1,230 mm H = 1,640 mm Weight: approx. 1,300 kg incl.: - automatic star-delta start - electronic control cabinet, fully wired - automatic stop at idle - CE-compliant - GS mark "dust-tested" - vibration-damping machine feet - 2nd row of knives = 14 knives 40x40mm

Condition: excellent (used), CATALOG NO. 6943 TECHNICAL DATA - inlet of the loading hopper 1600x1500mm - working width of the rotor 1500mm - main engine 45kW - 5.5kW pump motor - number of knives 44 pcs - knife size 50x50mm - 59mm sieve - pressure drawer - autoreverse - dimensions length/width/height 3430x2800x2850mm - weight about 9000 kg ADVANTAGES - French production - new knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 169900 Net price: EUR 38614 Czgbwelj2S Net price calculated according to the exchange rate of PLN 4.4 / EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2017, Operating hours: 1,345 h, used, top condition, low mileage make Gross type GAZ 62 year of manufacture 12/2017 machine . 01117144 hours 1345 CE type-tested GS wood dust tested motor 18.50 kW slow speed with hydraulic push floor hopper opening 600 mm x 800 mm cutting unit width 600 mm rotor width 600 mm automatic switch-off vibration damper number of knives 2 x 14 pieces suction connection D 160 mm Cg2Nf0Gw0 space requirement approx. 1800 mm x 1250 mm x 1700 mm weight approx. 1600 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen without guarantee and warranty

Condition: excellent (used), CATALOG NO. 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2 pcs - sieve dimensions 55x55mm - 4 toothed pulling rollers from the bottom - lower shaft motor 5.5 kW - 3 toothed pulling shafts from above - upper shaft motor 5.5 kW - belt feeder - length of the conveyor belt 4300mm - width of the conveyor belt 600mm - 2.2 kW tape feed motor - main engine 90kW Bor37Vgpjx - reverse gear, - auto reverse - overall dimensions of the machine length/width/height 4600x2350x1700mm - total dimensions of the feeder length/width/height 4550x980x970mm - total weight about 11000 kg – German production, – used chipper, very good condition Net price: PLN 295900 Net price: EUR 67250 Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: new, Available from around December 2022belongs to shredder type GAZ 62V 18,5 kWLength 590mm Ce7E7Pvmqs

Condition: excellent (used), CATALOG NO. 6928 TECHNICAL DATA - inlet of the loading hopper 1560x1300mm - working width of the rotor 1300mm - main engine 36kW - 2x3kW pump motor - number of knives 36 pcs - knife size 40x40mm - 30mm, 28mm sieve - pressure drawer - electric autoreverse - dimensions of the machine length / width / height 3400x2420x2820mm - dimensions of the control cabinet length/width/height 1000x450x1900mm - pump dimension length/width/height 800x700x850mm - weight about 5000 kg ADVANTAGES – German production – like the Weima WL 15 – autoreverse – pressure drawer – hydraulic pressure drawer from above – improves the efficiency of the machine J0Uff3 - very good condition – used chipper Net price: PLN 156900 Net price: 35659 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2001, CATALOG NO. 7089 TECHNICAL DATA - inlet of the loading hopper 1020x1230mm - working width of the rotor 1020mm - rotor diameter 348mm - main engine 22kW, 400V, 50Hz - pump motor 0.75 kW - number of knives 50 pcs - knife size 35x35x20mm - 12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2000x1130x1530mm - weight 970 kg ADVANTAGES Bbcronyejjn – autoreverse – like WEIMA WL 10 – German production – pressure drawer - very good condition – used chipper, DTR+CE documentation Net price: PLN 122900 Net price: EUR 27932 depending on the price of EUR 4.4 (Prices may change with higher volatility)

Condition: excellent (used), Catalog number 7293 TECHNICAL DATA - dimension of loading hopper top L/W 1200x1520mm - dimension of loading hopper bottom L/W 1000x1520mm - outlet for shredded wood + adder - rotor working width 1500mm 7Obqltld - main motor 45kW - pump motor about 1,5kW - number of knives 41pcs - dimension of the knife 40x40mm - sieve 15mm x 20mm - pressure drawer - electric autoreverse - dimensions length/width/height 2450x2460x1720mm - weight about 3000kg ATTRIBUTES - german manufacture - very good condition - used chipper Original photos Net price: 187900PLN Net price: 42705 EUR depending on the price of 4.4 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7260 TECHNICAL DATA - loading hopper inlet 870x730mm - rotor working width 710mm - main engine 18.5kW - pump motor 0.75kW - number of knives 19 pcs - knife dimensions 75x40mm - 15mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2350x1400x1670mm - weight 1360kg ADVANTAGES – pressure drawer - very good condition – used chipper Net price: PLN 37900 Begus3Q Net price: EUR 8614 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW Nor7Nxmg9J - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition Net price: PLN 85900 Net price: EUR 19523 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NO. 7069 Zn8E79R TECHNICAL DATA - inlet width 400mm - inlet height 150mm - roller width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed pulling shafts from above and below 2×2.2 kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - width of the conveyor belt 400mm - main engine 30kW - size of the chipper length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight about 3000 kg – with a conveyor belt – electric autoreverse - reverse gear – used chipper, very good condition Net price: PLN 78900 Net price: EUR 17932 depending on the price of EUR 4.5 (Prices may change with higher volatility)

Condition: excellent (used), CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - roller width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from below - lower shaft motor 1.5 kW - toothed shaft pulling from above Bosrkkvois - upper shaft motor 1.5 kW - belt feeder - length of the conveyor belt 5400mm - width of the conveyor belt 400mm - main engine 30kW - auto reverse, - reverse gear - dimensions of the machine length / width / height 2200x1450x1150mm - dimensions of the feeder length / width / height 5300x550x500mm - weight 1950 kg – German production, – used chipper, very good condition Net price: PLN 75900 Net price: 17250 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)