4 shaft shredder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Einwellenschredder / pre-Shredder LINDNER JUPITER 2500,. Drive: 264 kW (2 x 132 kW), 2 x inverter, Rotor speed at 50 Hz: 57 RPM Rotor length 2500 mm. Blade size: 145 x 145 mm, Hydraulic power pack 11 kW, Vnl9jybxq All wear parts have been replaced, Machine weight: 35 t Length: 7100mm, Transport width: 2850 mm, Height: 3100 mm (without hopper) System tested, cpl. with Panel/control,. Incl. machine feet, maintenance platform, Hopper,. Test / demonstration by appointment possible. more
3
Rotor diameter 368 mm Rotor width 1500 mm Inlet cross section approx. 1500 x 1160 mm 9yvepyahd Rotor speed 90 RPM Hydraulic 5.5 kW Engine 90 kW more
2
twin-shaft-shredder for light shredding Tasks drive power: 2x7,5 kW M2rj2 cutting section: 485x340mm blade width: approx 19,5mm more
6
-Machine in stock -After reviewing the technical -VG condition TECHNICAL PARAMETERS: -2 shafts with blades running in opposite directions Vr9fym -Shaft length 490 mm -Shaft diameter 240 mm-shaft speed RPM 18 -Twelve knives on the shaft -Hopper with dimensions: 490 mm x 570 mm Overall dimensions: -Length: 145 cm Width 140 cm, -Height 290 cm weight 1000 kg The main features of the machine: * robust construction the commendable * for each professional * the machine is not painted... more
6
3-axle trailer + train eye 50 mm + 24.5 t + CAT-diesel C18 447,5 kW (new!) + self-propelled + Jockey wheel + tilt-out hopper + 2 crushing waves 2,820 mm long x Ø 610 mm + 134 cutting elements + shaft speed up to 43 R/min + basket punch 125 mm, alternative punch 250 mm + langes au stragsband, hydraulic folding + wireless remote 9ubwprxmm more
1
Item cross sectional area: approx. 2500 x 2000 mm Work cross sectional area: approx. 1500 x 1900 mm Rotor diameter 750 mm Rotor width 2000 mm Rotor speed approx. 45 rpm Drive system: 2 x 90 kW 87qdut0xe Weight 20000 kg . No.: #10239 more
6
The engine was rebuilt in 2016 with a particularly low blade gap. It is suitable particularly for film recycling and similar applications. Due to the very high indentation effect, the machine can be used as well in the recycling of food scraps. -Power: 30 kW / approximately 5100 nm / 57 1/min -Cutting factory Assembly: 34 blade, 3 Zack, 18.5 mm, polished -Cutting factory opening: approx. 700 x 500 mm -two sides with wear plates - scraper - motor with Thermistors Mzr7cr8 -Weight approx. ... more
1
4-shaft shredder Inlet cross section approx. 1000 x 700 mm Drive 2 x 18.5 kW M07mv more
6
Very compact crusher for light grinding tasks. From German production. The AZ7 1994 was delivered new and never used. The machine is like new and has only minimal optical defects. The machine is equipped with many extras. The cutting unit has a high collection action and large throughput. In combination with the indenter, the crusher is very suitable for bulky plastic packaging, biomass and similarly easy to be crushed materials. The base is suitable for standard bins with 1100 liters volume. - ... more


4 shaft sh...
every day

New machines via email!

Be informed!
1
Rotor diameter 348 mm Working width 820 mm I9dgaud Inlet cross section approx. 800 x 1000 mm Hopper volume approx. 0,9 cbm Drive motor 22.0 kW Suitability: Reduction of residual and recyclable materials from wood and wood-like materials more
3
-Power: 18.5 kW - cutting factory Assembly: 12 mm, saw tooth -Cutting factory opening: approx. 500 x 500 mm 00ptdtadm -two sides with wear plates (G-type) -Scraper - motor with Thermistors -Weight approx. 1200kg more
4
Cutting of long and short residual wood, chipboard, packages or strips. Horizontal material feeding Inlet: 1200 x 1200 mm Vibrorinne Rotor diameter: approx. 350 mm 87qjj0ftx Width: 1200 mm Drive: 45 kW . No.: #7698 more
5
MOCO AZ11 shredder ----- -Power: 11 kW -Cutting factory Assembly: 25 meter, 1 Zack, 19 mm, very good -Cutting factory opening: 510 x 500 mm -one side with wear plate Ky7ml2bl MOCO ZB1 indentation device ----- -Power: 0, 55kW -enhanced funnel attachment -ideal for crushing of bulky, difficult to collect goods Including electric composite control with overload reversing function and interference substance detection ... more
2
Inlet cross section approx. 750 x 420 mm 7crc78dl Rotor diameter 250 mm Rotor speed 140 RPM Hydraulic 0.75 kW Drive 15 kW Weight: approx. 1000 kg #10223 more
4
- drive power: 11 kW / 24 1/min / ca. 4400 Nm - cutting segments: 37 pcs, 1 hook, 12 mm width, like new - cutting section: 510 x 500 mm - one side with wear plate - weight ca. 1000kg - incl. electrical control - incl. base frame - incl. hopper Lqtbj more
1

2-shaft shredder EREMA Z 570

Zuzenhausen Germany
6603 km
USED
Item cross section approx. 700 x 750 mm Cutter opening 690 x 566 mm Number of knife shafts: 2 Number of knives: 16 Iqgjh2j Drive 22 kW Weight approx. 2500 kg . No.: #10308 more
2
Single-shaft shredder for softwood, chipboard, etc. Inlet cross section approx. 1000 x 1200 mm Mo279 Drive 30 kW more
3

2-shaft shredder ARP CS 5000

Zuzenhausen Germany
6603 km
USED
2-shaft shredder Einlaufqürschnitt 400 x 400 mm With pressing device and base frame drive 2 x 7.5 kW Gz07ixocq more
3

2-shaft shredders ZENO ZDV

Zuzenhausen Germany
6603 km
USED
2-shaft shredder for wood Hopper opening: 2,500 x 4.000 mm Rotors: 2 PCs. Rotor flight circle: 575 mm Coyudjy Drive total: 88 kW The two gegeneinander ongoing rotors full steel are offered with various tool systems. These are massive, positive set, 2 x suitable crushing tools or 4 usable cutting edges on positive used tool holders. The 2-rotor system ensures optimal throughput performance for old wood, bulky, and similar materials. A very effective exposure of the impurities cont... more
3
Zeno single-shaft shredder type ZTLL 1400 x 1600 with the following features: M3dbl Drive system: 2 x 75 kW Hydraulic filter drawer with 85 mm screen perforation Counter knife beam with 3 piece counter blades 51 piece tool holder for cutting slabs 60 x 60 x 3 mm Rotor diameter: 600 mm Receiving hopper: 1000 mm height Hydraulic post press equipment the machine is equipped with new knives and counter knives. In addition, the machine has an own control cabinet. Optional wide infeed convey... more
4
Voltage: 400V / 50 Hz Gotjyin Feed opening: 800 x 1200 mm Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed 600-100 rpm Engine power: 22 kW Cutting system: 42 knife Screen perforation: 20 / 25 mm; 2.Sieb 15/20 mm Dimensions: l: 2. 420mm; b: 1.530 mm; h: 1400mm Funnel magnification self-construction: l: 2800 mm; (b): 1250mm; h: 1600mm Weight: 1300 kg Autom. Star-Delta starting Control cabinet electronically, fully wired Automatic off when idle CE conform GS-Mark Staubgepruef... more
2
Drives and services Drive motors blade shaft: 2 x 30 kW Hydraulic unit for push-button: 5.5 kW mass and weight Total external dimensions LxWxH: 2400 x 2850 x 2050 mm External dimensions during maintenance work (funnel tilted) LxBxH: 3000 x 3850 x 3050 mm Height of insertion: 2050 mm Insertion funnel L x W: 720 x 1450 mm 9tegleyjm Weight: Approx. 7500 Kg cutting set Speed of blade shaft: 101 rpm. Number of knives (reversible cutting edges) -Rotor (blade shaft): 240 blades -Stator (counter knif... more
6
Single shaft shredders for wood, with an opening for depositing the wood 100x115 cm. knives positioned diagonally in a 115 cm long cylinder, each row includes 10/11 knives size of 7,5x4 cm. the engine power is 46 HP. Second hand. Wrlpyikp more
6
Inlet cross section: 1250 x 850 mm Blade width: 28 mm Number of knives 45 Engine: 37 KW New Cabinet 3bowqmnx9 New funnel New base The blades are in good condition. Weight: about 5000 kg Machine is ready for testing more
6
Single-shaft (rotor -) Shredder ZERMA ZSS 2000 Year 2013 2 x 55 KW, rotor width rotor diameter of 2000 mm, 457 mm Complete system with feeding conveyor belt discharge conveyor (bend belt conveyor) with excess Ribbon magnet Impression device hydraulic (2 levels) Wear protection 9qt9pfpyh Complete electric circuit very good condition, little run more
6
MAWERA FOUR-SHAFT SHREDDER Condition: used excelent ready for operating Shafts nr.: 4 PCS Engines: 2 PCS x 7,5 kW Control panel: NEW Shafts: NEW Blades: NEW M0u7x Spare blades: 5 PCS Application: for wood, plastics, rubber; more
6
GRINDER TR 800 LTA 22 KW * Machine body in steel Fe 510 (UNI 7746) with high thickness, welded and with guaranteed stiffness by tensioning elements * Rotor in steel Fe 510 (UNI 7746) with high resistance with traction by commuter gearbox (with gears in oil bath) connected to the electric motor with transmission pulley / belt Ø 260 * Anti-stress device to absorbs the shocks to protect the rotor and the gearbox * Blades in special steel reversible and easily replaceable N° - mm 38 - 30X30 * Bla... more
3

Twin shaft Shredder VTR CMI 3000 Twister

Mortara (PV) - Italy Italy
6801 km
2011
USED
Mxs2tMotor: Diesel Iveco Cursor13 Power: 380 kW (510 HP) Opening frame: 3500x2500 mm Grinding chamber:2000x1600 mm Blade Thickness: 140 Year of costruction: 2011 Production: 15-25 ton/h Condition: running-good conditions more
5
Shredder WS 15 Working hours: 70 hours Conveyor system System consisting of: -Conveyor belt under WS 15 with knock role Vfj7vuvfu -Permanent magnet with steel construction -Conveyor belt The machine was installed two months ago and is in like new condition. From store stock. more
6
Manufacturer Doppstadt Calbe GmbH Xynmjv8fj Type DW 2560 E1 Bueffel Year of construction 2007 Drive power 210 kW Rotor 2.500 x 600 mm (l x d) Rotor revolution speed 31 rpm. Througput rate capacity up to 40 t/h, depending on material Total weight approx. 24,1 t Motor Manufacturer T-T Electric Type LAK 4225 A Drive power 210 kW (460 V / 489 A) Hydraulic unit Manufacturer Hansa Flex Drive power 7,5 kW Dimensions Machine dims. without chute 6.240 x 2.300 x 3.150 mm (l x w x h) Feeding mea... more
2
Inlet cross section: 2500 x 1700 mm Drive: 160 kW Rotor flight circle: 670 mm Bmvcdzm2 Interfering substance removal: hydraulically prestressed and to open doors for interfering substance removal Rotor version: 14 PCs. positive cutting plates 120 x 120 x 55 mm on tool holders Counter knife with cutting gap adjustment Feed device: hydraulic Hopper: 1,700 mm high, with circulating pipe line tube Machine weight: approx. 24,000 kg more
6
MAWERA FOUR-SHAFT SHREDDER Condition: used excelent ready for operating Shafts nr.: 4 PCS Engines: 2 PCS x 7,5 kW Control panel: NEW Shafts: NEW Blades: NEW Spare blades: 5 PCS 9n7myb9bw Application: for wood, plastics, rubber; more
6
Manufacturer, type, year of construction: not readable + Dimensions of the system: Length: 3150 mm width: 1350 mm height: 1250 mm + Throw cross section: 1000 mm x 1100 mm (can be increased to 1000 x 2500 mm) + Mixer: Working width per section: 700 mm Drive / wave: geared motor 5.5 kW, 50/60 Hz 8d9ztoyib Speed: 45 rpm + Food processor: Working width per section: 500 mm Drive / wave: 7,5 kW, 50/60 Hz Speed: approx. 1700 RPM Hole screens can be used 1 sieve availab... more
5

Two-shafts shredder Holzmaic

Mortara (PV) - Italy Italy
6801 km
USED
This machine is mounted on 20 tf container frame (so it is possible to move it with a truck) and it has mercedes diesel 8 cilynder with a dinamo that moves a 190 kW electric motor on the shafts and a 50 kW electric motor for auxiliary system. Blade's thickness is 100 mm and the input opening is 1200x2300 mm. Mtxuyc It was used mainly to work car and truck tires, alluminium, washmachines and light scap too. more
5
Two Shaft Shredder - Rotary shearShear bed: ca. 1900mm x 1600mmControl Cabinet, Hydraulic Aggregates and other supplies inclusive.Ideal for shreddering Car Wheels and other materials.There are two machines for sale including spare parts such as pumps and waves.The machine is demounted at the moment but can be reengineered as you wish.Further description is possible by phone inquiry.More pictures can be sent per mail.Price is negotiable. Dvxr0q more
5
Underframe for Untha 4-shaft-shredder RS100 Main-measurement: LxWxH = 4.3 x 1.87 x 1.8m Steel-construction with laterial Podest with railings and access-ladder. C39r3boq Included ist a crane-way-frame for changing cutting-system. more
3
The operation of the machine is almost silent, as the dust is extremely low. The working principle of the machine based on the fact that two oppositely disposed knife shafts run into each other. The cutting discs are individually replaceable and can be sharpened easily. When overloading the drive motors, the direction of rotation of the machine is switched automatically to prevent blocking. After a few seconds the system automatically switches back to the working direction. The automatic directi... more
6
Technical parameters: Manufacturer: ZERMA Type: ZSS-1000 H Prod. Year: 2008. Condition: used, in perfect condition, ready to operation Installed power: 22,5 kW Shaft lenght: 1000 mm Voltage required: 400 V/ 50Hz/ 3 fase 9md7bxv3z Hopper size: 1140 x 1200 mm upper side; 900 x 1200 mm down; Nr. of shaft: 1 db Blades: 90 pcs delta shape blades, brand new, very sharp; Sieve: yes Sieve diameter: 3 pcs with different hole diameter Pneumatic pusher: yes Emergency stop: yes Engine protection: ye... more
2 - shaft shredders or Ball Wolf called, tears which pressed Recyclingmateri9al as plastic or cardboard or other material and crushed. Hopper is 1.2 mx 1.2 m The rotors are superposed diameter 500 mm low speed with 37 kW drive Coory2h more
6

Three shafts shredder Satrind 3R 15/320

Mortara (PV) - Italy Italy
6801 km
2008
USED
Satrind three shafts, complete with discharge conveyor belt and hopper Power unit: 238 kW (320 HP) Grinding chamber size: 1510x1100 Dfwpd8iwg Blade thickness: 50 to 100 mm Condition: just revised, new blades more
6
Two-shaft shredder Suitable for the pre-crushing of waste, plastics and light metals Similar raw materials. H2jzc8t Manufacturer: MEWA Type: UC-60 Year: 1997 Wave length approx. 600 mm Cutting discs Ø: approx. 250 mm Cutting disc width (blade width) 30 mm Cutting discs: 12 pieces per shaft Funnel opening at the top approx. 1200 x 750 mm Height of funnel approx. 840 mm Feed opening Shredder approx. 600 x 750 mm With frame frame approx. 2660 x 2010 H 125 mm With geared motor (type plate not read... more
1
GM Nr.: 09259 Size of cutting unit: 900 x 500 mm Drive power: 22 kW Diameter of hole sieve: 25 mm B98awrvr Rotor design: 3 hook knifes Year of manufacture: 2009 Demonstration machine. Complete with machine frame, funnel with pneumatic press-in device and control more
6
Cable - Vorshredder of special with many technical Extras: - adjustable contact pressure of the hydraulic pusher Wb990 -Adjustable power consumption for automatic operation -Statormesser with interchangeable blade plate (identical rotor blades) -bolted knives holder on the rotor -Optimised funnel shape to less clogging This very easy to maintain and cost effective. Power:-rotor 17 kW -Hydraulic 2,2 kW more
6
Single shaft shredder VECOPLAN VAZ 160/200 Ytbrnyxav more

2-shaft shredders Vecoplan VGZ 250

Bergatreute Germany
6737 km
2003
USED
Shredder for primary crushing of large material Working width 2500 mm Working depth 1700 mm 2 x 132 kw electric motor drives the hydraulic drive. Cb3jqc3c more
3
Double shaft shredder with low hours working Capacity 100 m3/h Feed-in 1820 x 2500 mm Rotors 2 unit. D = 630 mm (with interchangeable tools) rotational speed 30 rpm Boqmifac Motor 2 units a 90 kW frequency transmitter 2 Stueck Input pocket of the crusher is equipped with hydraulic door (manual) and a bypass slope. RAUMASTER double-shaft shredders are built for extreme-duty, delivering throughputs of up to 100 to/h. Unlike old-style dual-shaft shredders, the two cutting rotors on RAUMASTERS dua... more
3
Four shaft shredder equipped with electric oven (control) Year: 2017 Complete Revision Very good condition. Motor power kW: 22 (2x11) Cutting: Cutting width mm: 460 Cutting Opening mm: 500x460 slices mm: 200 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 1400 Width mm: 1200 Height mm: 2.000 funnel opening mm: 1200 x 1200 Weight kg: 2,000 approx On request, other perforations (15-70... more
1
GM Nr.: 10781 Size of cutting unit: 900 x 500 mm 3ig3q0rrm Drive power: 22 kW Diameter of hole sieve: 25 mm Rotor design: Full rotor Year of manufacture: 2012 Cutting unit without control unit and without funnel and frame. more
6
Older but fully ready to use shredder with new hopper/base. Was pre-Shredder in cable recycling in action. 3x7kjdhxi Cutting area: 509 x 500 mm Dimensions, approx. 1,900 x 650 x 550 mm Weight: approx. 1,000 kg Power: 7,5 kW more


4 shaft sh...
every day

New machines via email!

Be informed!

to

to

Change search
4 SHAFT SHREDDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.