Spindle with 7 revolving tools
Possibility of 14 profiles in combination with vertical fence
Spindle length: 180mm (full length)
motor: 5,5/7,35/9,55kW
motor speeds: 6000/8000/10000 tr/min
Mw2gvnsf
Glazing bar: 3kW
Grooving saw at the bottom 3kW
Feeder: 4 - 30 m/min more
Complete machine with automatic input and output!
Mvzon
max input 3000mm
scissor table 2000KG
max width on scissor table 2500mm
With Groove bed
5 axes including groove bed
40mmØ
25pk
more
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
2wbo73t0o
KUPFERMUEHLE Doma-b 1320 - 4-sided planer, for laminated beams, with 4 heads. -- Top brand machine, completely overhauled in 2016 by major German machinery specialists. -- Working width 1,320 mm (52"), working height 300 mm (11-13/16"). When planing on 4 sides the max. working height is 250 mm (9-13/16"). -- Head configuration: -- 1st Head: Bottom planer head 18,5 kW (25 HP). -- 2nd Head: Top planer head 22 kW (30 HP). -- 3rd Hea... more
automised machine
workpiece thickness: 6 - 60 mm (depending on aggregates)
min workpiece width: 60mm
min workpiece length: 140mm
max edge thickness: 30mm (depending on aggregates)
feedspeed: 8 - 20 m/min
equipment:
Infeed fence with automatic setting
Pre-Milling un, 2 x 3kW, max workpiece thickness: 48mm, 1960
Coil and strip magazin, 190
glue station with granules and hot melt cartridges
Pressure zone, pneum. Loaded, 1 driven, 6 non-driven rollers, 1917
End trim, 0° - 15°, 2 x 0,45kW, max edge... more
Spindle moulder
- year of construction: 2008
- voltage : 3 x 380 volt - 50 Hz
- CE safety requirements
Execution :
- working table dimensions 1100 x 900 mm
- machine height 910 mm
- tiltable spindle
- arbor Mk5
Qgtqxzff
- shaft diameter 50 mm
- spindle revolutions 3000/4000/5000/6000/8000/10000 rpm
- motor power 2 speeds 4,5/5,5 kW
- movable control panel over the working table
- integral safety guides
- dust collectors diameter 120 mm
- weight 465 kg
* roller bearings need to be renewed
more
Compact Kantenannleimmaschinen for straight workpieces with enamel adhesive rollers on the edge of the workpiece.
Pressure by inclined table role and standing at an angle to the workpiece direction feed bar (tape feed).
Facilities:
-Quick heating pool
-pneumatic edge indentation and rolling capping
-HF caps saw unit
-HF levelling moulder with combined Exchange Board cutter for RADIUS/straight/bevel
-pull-out workpiece support
Mxwzh
Technical data:
Work dimensions: Length: min. 260 ... more
double-sided heavy load shelving super suitable for bar material (flat or even round) hydraulic and Instrumentation lathing: Figure x shows a rack system in the assembled state here, but several units are connected.
There are 4 vertical Stuezen with crossbar and length approximately 30 arms approximately 3 m (12 pillars with arms are a total voranden) supports can be attached via ground anchors.
Stangenmaterlial - material storage manufacturer: FISCHER
Type: heavy duty collar shelving doub... more
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
2tlamjr3l
KUPFERMUEHLE K 30 - 4-sided planer, for laminated beams, with 6 heads. -- Working width up to 300 mm (11-13/16"). -- Maximum thickness up to 250 mm (9-3/16"), minimum 15 mm (9/16").Head configuration: -- (2) Top and (2) bottom heads with knife jointers and counter support bearings. -- (1) side head left & (1) side head right. -- Chamfer sets top and [...] system: -- Feed speed up to 170 m/min (557 FPM). -- The feed system is driv... more
Dimensions (l x w x h) approx.: 3100 x 1300 x 1500 mm
Weight approx.: 1800 kg
Description: Machine number 17 1044, Working width max. 220 mm, min. 25 mm, working height 6 to 120 mm, feed 1,8 kW, spindle arrangement lower-right liks-up, spindle diameters 40 mm, motor dressing shaft 4 kW, vertical shafts right / left 4 kW each, planer shaft 5,5 kW, total power consumption 20 kW , Working speed 6000 rpm
In Online Auction with approx. 149 further Machine Tools and other Assets!
Julnca
Bidding ends... more
Please note: the photos are of a comparable machine
Facilities:
Contact power to the workpiece preheating
-Gluing unit for Hotmelt granulate
-Automatic edge magazine for rolling stock and fixed lengths
-Pressure zone powered main roller with 2 reproduction wheels
-Central adjustable top pressure
-pull-out workpiece support
-Noise Control Panel
-Electronic control easy control EC 10 +
-Adjustable infeed fence
-Trimming unit of 2 x 2, 2 kw, 200 HZ, - Pneum.-package caps and scraper
-... more
We offer you a used table milling machine manufacturer REX with Holher feed,
Absolute Professional machine!
Weight ca. 1t.
with various cutters
Type: Probably F59
Dhs0kbraw
incl. table extensions. (Pictures to follow)
Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14.
The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistake... more
Elect./Voltage: 400 V, 50 Cy, 3 Ph.
Hgpc8qf
HUNDGEGGER HM-C Four side planer for construction wood and chamfer routing automat type: HM-C --SPECIFICATIONS: --Plaining capacity: min. 15 mm x 40 mm, (.590 " X 1.56" ) max. 260 mm x 400 mm (10.2" X 15.7" ) --4 spindles each with 7 KW motors,,4 side chamfering unit each 1,1 KW --Arrangement of the planer spindles: 1 and 2 horizontal bottom and top planer spindles 3 and 4 left and right --Equipped with & Features --Tersa planer heads --The ... more
WEINIG Unimat 23 four pus type GOLD built in 2001
Machine data:
Planing width 20-230 mm planing height 8-120 mm 6 speed-30 m / min, spindle design:
1 horizontal bottom spindle, motor power
2. vertical right spindle, motor power
3. vertical-left spindle, motor power
4. horizontal spindle, motor power
5. horizontal spindle, motor power
6 horizontal ground spindle, motor power
Spindle diameter 40 mm -
- 4 driven feed rollers in the table
8lbpaj2ji
- robust universal feeder
more
Capacity: 230 x 130 mm
Spindles: 9
Bottom 5,5 kW, fence 5,5 kW, near 7,5 kW, fence 5,5 kW, near 5,5 kW, top 7,5 kW, bottom 5,5 kW, top 5,5 kW, bottom 5,5 kW
K8kp9
Automatic positioning on spindles 3, 5, 6 and 8
Outboard bearing on spindles 8 and 9
Straight jointer on spindle 9
Driven rollers in the table
Working hours indicated: 23849
Diameter of spindles: vertical 40 mm, horizontal 50 mm
- Feed speed 4 36 m/min (5,5 kW) more
Single sided edge banding machine
Brand: Ott
70hf2sjdc
Type: Eurom FU
Year: 1999
Fully functional, annual maintenance by Ott, latest maintenance in January 2017!
-High-performance processing units
-Integrated high resolution linear path control
-High level of unit automatization
-Efficient control with memory
-Save and low dust/noise
Equipment:
- Fast heating glue pot with automatical working direction control
- Coil magazine with end trimmer for PVC and thick-veneer coil material with op... more
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
0hxljsgv
KUPFERMUEHLE Doma-g 2050 - 4-sided planer, for laminated beams, with 6 heads. -- Top brand machine, completely overhauled in 2011 by major German machinery specialists. -- The machine comes with a turntable which allows a machine rotation up to 180° to change feed direction and up to 70° rotation to accommodate curved beams, etc. -- Working width min. 100 mm (3-15/16"), max. 2,050 mm (80-11/16"), working height min. 30 mm (1-3/16"), max... more
Dimensions (l x w x h) approx.: 4150 x 1600 x 3000 mm
8mxqep7gs
Weight approx.: 300 kg
Description: With 3 shelf elements, largest shelf surface ,600 mm
In Online Auction with approx. 146 further Machine Tools and other Assets!
Bidding ends: Tuesday, 25 July 2017 from 10am (local time)
Auction start price: EUR 150 (plus VAT and 15% buyers premium)
Your contact person: Michael Kleinschmidt more
Feeding table Homag TB 10/25/20
Double sided squaring and edge banding machine KF 20/12/QA/30
Edges up to 3 mm thickness
First and second pass machine
Panel feed by rolling chain
Top pressure by driven V-belts
Width adjustment over linear slideways
Feed speed 10 to 40 m/min
Panel outstand 40 mm.
P83eagc
Workpiece thickness 8 to 60 mm.
Working height: 950 mm.
Working width, double sided min. 240, max. 3000 mm.
Coil edges 0,3 to 3 mm., coil-diameter 900 mm.
Edge crosscut for PVC max. 135 mm2, fo... more
Moulder
- year of construction 2002
- voltage 3*400
- ce safety requirements
- max. capacity 180 x 105 mm
Desww2e8g
- min. capacity 20 x 6 mm
- with reference tool
- manual table lubrication pump
- electrical height adjustment bridge + top axis
more
KUPFERMÜHLE heavy duty wide moulder, type K 43
Planing width : 420 mm
Planing height : 250 mm (2-sides)
Planing height : 120 mm (4-sides)
Feeding : max.150 m/min, Motor 11 kW
Fix table height : 800 mm
Spindle lay-out:
1. Horizontal spindle bottom
- Motor power 22 kW
- Front bearing
Nktbwyqn
2. Horizontal top spindle
- Motor power 30 kW
- Front bearing
3. Vertical spindle right
- Motor power 11 kW
4. Vertical spindle left
- Motor power 11 kW
- Driven feeding rollers in table
- Driven... more
Spindle moulder, spindle moulder, spindle moulder with fixed spindle speeds 2500/4500/5000/6000/9000/12000 -6 U / min with 3-roll feed spindle diameter 30 mm Weight 460 kg
Uzf8c
more
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
Bq83csu
KUPFERMUEHLE VUIN 760 - 4-sided planer. -- Top brand machine, checked and tested by major German machinery specialists, the machine is in excellent condition. -- Working width 760 mm (29-15/16"), working height 200 mm (7-7/8"). Max. working height with (4) spindles in use 85 mm (3-3/8"). -- Head configuration: -- 1st Head: Bottom planer head 7,5 kW (10 HP). -- 2nd Head: Top planer head 11 kW (15 HP). -- 3rd Head: Top planer head 11... more
Dimensions (l x w x h) approx.: 4200 x 1700 x 1800 mm
Weight approx.: 2500 kg
Description: Serial No. AB/154603, machine composed of 5 shafts: 1st lower horizontal shaft, 2nd vertical right shaft, 3rd vertical left, 4th upper horizontal, 5th lower horizontal. Motor power approx. 4 Kw each, infeed table 2300 x 235 mm approx., max. working width 230 mm, min. working width 25 mm, max. working height 120 mm, min. working height 6 mm, min. lenght single piece 620 mm, feed rate 5/25 m/min, shafts spee... more
Workpiece sizes: Length 180 - 3000 mm, width 100 - 800 mm, thickness 12 - 40 mm
Fixed side at the left, motorised width adjustment of the right side
Working height/ transport height: 900 mm
Workpiecetransport with belts, infeed belts can lift up
Variable feed speed
Workpiece middle support with rollers
Each side has got 8 glue injectors and 8 dowel inserters (Type 24)
Doweldiameter: 8 mm, dowellength 30-40 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm
Each side with 2 dowel... more
1 1/2 sided combined edge processing machine
Brand: IMA
Type: COMBIMA
for the lengthwise and crosswise processing of doors
equipped for the edge transfer-finish-process
Technical data:
Edge materials:
a) PVC strips,
coil ware
min. strip height
a) coil material = approx. 14 mm
max. strip height = approx. 50 mm
max. strip thickness
b) coil materials = approx. 1,3 mm
min. workpiece length
a) crosswise processing = approx. 400 mm
b) lengthwise processing = approx. 700 mm
min. workpiece thickness = ... more
SCM Superset XL foursided planer with 6 spindles Year of Constr. 2007!
Machine has been painted in these green colours on special request of the former customer
Nixoltkf
Description
Spindel sequence bottom-right-left-top-bottom-Uni
Siko Counter
Electrical heigth adjustment
Cardan drive
Waxilite pump
400 Volt
Dimensions 4840x1650x1700mm
3000 kg
CE
(All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!)
Best woodwo... more
Elect./Voltage: 415 V, 50 Cy, 3 Ph.
Vujikzk8a
KUPFERMUHLE VUIN 600 Four (4) Sided Planer: 24" x 6" Opening cap., limited to 3-1/4" tool cuttingheight for the side [...] configuration: Bottom 15 HP, Top 15 HP, Right side 10 HP, Left side 10 HP [...]: -- Feed drive 3.75 HP motor. -- Table raise-and-lower with 2.5 HP motor. -- Equipped with: (7) Powered feed rollers, -- (4) Feed speeds of 20 - 30 - 40 & 60 FPM. -- Sectional infeed rolls and chip breaker. -- Slatted table top on bottom ... more
Second-hand machine
Year of construction: 1983
7yywxg9pe
State: Funktionsgeprüft
Technical data: rigid cutter
Table length: 1100 mm
Table width: 900 mm
Diameter milling: 30 mm
Height adjustment via hand wheel
Stop JAWS made of wood
Incl. Holz-her 3-roll feed ETZ with new feed rollers
Location: Hochheim
Availability: Short term
more
Capacity: in 180 x 130 mm., out 170 x 120 mm
Feed speed: 6 to 28 m/min, 2,2 kW motor
Cardan shaft drive
Pneumatic pressures
Spindles: 8
Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 5,5 kW, top 11 kW, top 7,5 kW, bottom 5,5 kW, universal 5,5 kW
Spindles 40 mm diameter
Spindle speed: 6000 rpm
Mechanical digital read-out
Infeed table length: 2 m.
Max. cut on 1st spindle: 10 mm.
B3sgzwd
Min tool diameter: 100 mm,
max tool diameter: 180 mm on first and universal spindle, 195 mm on vertical spindl... more
Single sided direct-postforming machine
Brand: IMA
Type: Combima Systems 1 G80
Year 2004
Technical data:
working side left, whole machine length appr. 15 meter
2 hogging motors appr. 4 KW, 100 Hz, 6000 rpm
2 Radius milling motors appr. 4 KW, 100 Hz, 6000 rpm
Bend groove milling motor, 3 radius milling motors
Hotmelt application heads, with premelting unit Nordson
Heating and Postforming pressure zone
Champfer milling unit
3kzebqrv
Buffing unit
more
230 x 125mm capacity
2.5m infeed table
8jh0h2sp0
5 spindles in sequence 5
Bottom x 7.5hp
Right x 7.5hp
Left x 7.5hp
Top x 7.5hp
Bottom x 7.5p
All spindles 6000rpm x 40mm dia
Feed speeds variable 5 - 25m/min
Quick " Set Up " system enabling machine setting in one movement
Soundproof enclosure with lift up access door
Year - 2002 CE Compliant
Condition - Good
more
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph.
7j3p33gnh
KUPFERMUEHLE Doma-g 2050 - 4-sided planer, for laminated beams, with 6 heads. -- Top brand machine, completely overhauled in 2010 by major German machinery specialists. Does not come on the market often. -- The machine comes with a turntable/caroussel which allows a machine rotation up to 180° to change feed direction and up to 70° rotation to accommodate curved beams, etc. -- Working width min. 100 mm (3-15/16"), max. 2,050 mm (80-11/... more
Capacity 230 x 130 mm.
Spindles: 7
Vpy9vc077
Bottom 3,7kW, fence 3,7kW, near 7,5kW, fence 3,7kW, top 7,5kW, top 7,5kW, bottom 7,5kW
Spindle diameter: 40 mm.
Feedmotor 2,2 kW more
Used paint drying trolleys double can be used with 4 data
Width of 20 cm to 200 cm - extensionable and lockable
Mtx7uo
17 floors, 4 nylon castors
Supporting tube length 600 mm, extended up to 1150 mm
Set up dimensions: width 195 cm height 187 cm-depth 130 cm
Just pick no dispatch
For the pickup with a forwarding agent of paint drying trolleys can be assembled and packed on a euro pallet
more
Dimensions (l x w x h) approx.: 6300 x 2300 x 2200 mm
Weight approx.: 8000 kg
Description: Serial n. 101.007, with WEINIG LOADER series EM 11 serial no. 101.008, working width 20 - 230 mm, working height 8 - 120 mm.
Composition:
1° lower shaft, motor with brake 7.5 kW (10Hp), Ø40 mm, 8000 rpm, useful diameter 125 - 180 mm,
2° right shaft, motor with 7.5 kW brake (10Hp), Ø 40 mm, 8000 rpm, useful Ø 112 - 250 mm,
3° left shaft, motor with brake 7.5 kW (10Hp), 40 mm Ø, 8000 rpm, useful Ø 112 - ... more
Elect./Voltage: 575 V, 60 Cy, 3 Ph.
Du0ubq
YATES A 20 High Speed 4-Sided Roughing Planer: 15" x 8" Width Capacity, 14-knife top and bottom planer cylinders;Equipped with: -- (2) 50 HP, 3,600 RPM machine-mounted motors with belt drive to the top head. -- (1) 50 HP, 3,600 RPM machine-mounted motor with belt drive to the bottom head. -- (1) 50 HP right and (1) 50 HP left 3,600 RPM machine-mounted motors with belt drive to the side [...] Specifications: -- 1-13/16" Spindle dia. for vertica... more
Single sided edge bander with hot melt, fixed side at the right
Edge thickness: 0,4 to 3 mm
Workpiece thickness: 8 to 42 mm
Min. workpiece width: 70 mm
Feedspeed 12 m/min
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
[...]
Equipment:
Us7zqieyg
Edge magazine, guillotine for 3 mm edges
Hot melt unit
Pressure zone with1 driven and 3 non-driven rollers
End trims, 2 motors of 0,18 kW
Top/bottom fine and radius trimming, tilting, 2 x 0,5 kW... more
pressure:15 t
strokes per minute:200 - 2000 mm
sheet width:5 - 50 mm
ram surface:490 x 200 mm
adjustment of stroke:10-30 mm
weight:3 t
dimensions:1370 x 1200 x 2200 mm
Drive:10 kW
hole in the table:350 x 100 mm
table width:530 / 210 mm
Tan7sri8h
table length:530 / 350 mm
more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try out the Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+48 (0) 223 076 958
