4 side moulder

CASOLIN Mega 230/6

Condition: like new (used), functionality: fully functional, MITRE SAW , orientable +/-45° model OMGA T50 350 with dust aspirator second hand machine working conditions : Excellent CE regulation : Yes with extractor cabinet ( dust aspirator ) with flat diagram extensions Technical data : volt. 380/50 engine power Hp 3 ( kw 2,2) blade diameter mm. 350 Pedpfjm Ak Elex Amiegk with 90° blade : max height cut mm. 110 width max. cut mm. 130 with 45° blade : max. height cut mm. 110 max. width cut mm. 92 machine weight kg. 90 extractor cabinet weight kg. 50

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator Pgodpjvbtpofx Amisk -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Podpexnlgcsfx Amijgk Storage location: Garbsen

Condition: excellent (used), SCM Flex 1 Tenoning Machine Spindle diameter 40mm Pjdpfx Aswtf Adomiegk Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lifting Maximum cutter size 270mm 2.2kw cutting saw unit Automatic side trolley Pneumatic material clamps Four-roller feed

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Pedpfsnl Nqqjx Amijgk Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 2004, condition: excellent (used), Four-side planer Pjdohlp D Nopfx Amijgk -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Pjdpfju Damdex Amiogk

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic Podpfju Agh Ssx Amijgk 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Pedpfxefzzhyo Amijgk Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pgjdpoyh Ilyofx Amijk Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch