Moulder for sale
Identified location: Fort Lauderdale (US) (Edit)
Weinig Unimat 30 EL
300 x 200 mm wide
Bottom-right-left-right-left-top-top-bottom
with outboard bearings on horizontal spindles
with chamfer unit
with jointer
short infeed table
ATS system, automatic positioning spindles 3,5,6,7
Xyzws
Driven rollers in table
option : complete with in- and outfield more
used
Reversible blade system,
Profile equipment,
electrical height adjustment,
Lubricant pump,
dust tested
----- Technical data -----
Plane width: 230 mm,
Planing height: 120 (100) mm,
Number of spindles: 5 pcs,
Motor spindle 1: 4 kW,
Motor spindle 2 + 3: 5,5 kW,
Motor spindle 4: 5.5 kW,
Motor spindle 5: 4 kW,
Feed speeds: 5 - 24 m/min,
suction nozzle Ø: 5 x 140 mm,
Dimensions (LxWxH): 3,410 x 1,600 x 1,700 mm
Djlcvtj
=====
Quality - Info:
=====
- Feed checked
- Table guides checked / adjusted
- P... more
functionally tested
WP measuring heads Brück, glazing bead separation possible - is removed,
Ihjjrx2
Planing width max./ min. 230 mm / 23 mm
Planing height max./ min. 160 mm / 6 mm, (equipped with 120 mm heads)
5 spindles
spindle Ø 40 mm
Speed 6000 rpm
feed speed infinitely variable 4 - 24 m/min
Shaft arrangement bottom,left,right,top,bottom, laterally adjustable.
Machine size approx. W x L 1700 x 4000 mm. more
the machine is equipped with 4 axis Numeric Control
for the automatic positioning of the machine to the required finished
Xdztr79l
stock section.
max 230 x 120 mm more
used, cleaned, function checked,
test run, greased,
Vorschubketten renewed and new adjusted,
spindle rotation:
2/100-0/100-1/100-0/100-2/100-1/100 mm
manufactured by Weinig
type U - 16 - K
built in 1975
Masch.-No. 570/799
number of spindles 6
spindle alignment:
u - right hand - left hand - o - u - right hand
B20mng
motors:
4 - 3 - 5,5 - 5,5 - 3,0 - 5,5
planing width ca. 160 mm
planing height ca. 120 mm
table length ca. 2000 mm
pressure bar planer heads
table lubrication
feeder vor der surface p... more
CATALOG NUMBER 5245
TECHNICAL DATA
- 30-300mm machining width
- machining height 5-300mm
- machining height from 4-sides 300mm
- number of spindles 4
- power of 4x4kW engines
- feed motor 4x0,25kW
- lower, sliding transport rollers 14
Bd2muhvpis
- upper, pulling transport rollers 4
- aggregates for chamfering 4x1,1 kW
- a conveyor belt of 6700mm
- 6400mm receiving tape
- self-discharge receiver
- diameter of 4 x 120mm exhaust connector
- overall dimensions length / width / height 16600x2500x24... more
Weinig Unimat Gold
6 Spindels fourside planer and moulder
bottom-right-left-top-top-bottom
increased power on motors
increased rpm on the spindles
40 mm spindles
with EM10S infeed magazine
Bmvdupwsn7
machine in very good condition more
Number of spindles 6 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed motor 3 kW
Feed speed 5-24 m/min.
Dimensions (L/W/H) 3900x2200x2000 mm
Weinig fourside moulder Profimat 23, Window version with possiblity to divide
out glazing bead and ATS program control
-----
Technical Specifications Summary
(possibly additional accessories please inquire)
.....
General
..... ....
> Working width: 230 mm
> Working height: 120 mm
> Number of spindles: 6 pcs.
> ... more
PLANERS MOULDER type CASOLIN MEGA 230/5 CNC
second hand machine
working condiitons : excellent
volt. 380/50
machine composed by 5 shafts :
1° shaft : surface planer . motor power Hp 5,5
2° and 3° shafts : moulder . motor power Hp 7,5
4° shaft : thickness planer . motor power Hp 5,5
St8thw
5° shaft : surface planer . motor power Hp 5,5
entry table length mm. 2500
feeding speed : mt/min. 5/25
max. working width mm. 230
max. working height mm. 120 more
used
Reversible blade system,
electrical height adjustment,
dust tested
----- Technical data -----
Plane width: 180 mm,
Plane height: 120 mm,
Number of spindles: 4 pieces,
Feed speeds: 2 pieces,
Bjd0jsmvzj
Suction connection Ø: 150, 120, 120, 140 mm,
Dimensions (LxWxH): 3,300 x 1,400 x 1,400 mm more
new
- Hobelbreite 50 - 400 mm
- Hobelhöhe 10 - 300 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
Fq2m2er
- Drehzahl 6000 U/min
- 6 Spindeln
- untere Welle min. / max. Werkzeug FI 160 /180 mm
- rechte Welle min. / max. Werkzeug FI 160 /230 mm
- linke Welle min. / max. Werkzeug FI 160 /230 mm
- obere Welle min. / max. Werkzeug FI 160 /230 mm
- 2. obere Welle min. / max. Werkzeug FI 160 /230 mm
- untere Welle min. / max. Werkzeug FI 160 /230 mm
-max. Sägeblattdurchmesser 2. obere... more
CATALOG NUMBER 5701
TECHNICAL DATA
- max width of workpiece 200mm
- max workpiece height 140mm
- number of spindles 5
1) horizontal bottom 200mm 5.5kW
2) vertical right 140mm 5.5kW
3) vertical left 140mm 5.5kW
4) horizontal top 200mm 5.5kW
5) horizontal bottom 200mm 5.5kW
- all spindles adjustable up / down, right / left
- 40mm spindle diameter
- spindle revolutions 6000 rev / min
in advance:
3bgglbvp
- 6 input, pulling, toothed, metal, including 1 double
- 2 output rollers, smooth, including 1... more
2002
used
4-sided planing machineBrand: WeinigType: P 26 SYear: 2002 Working width 20 - 230 mm max. working height 120 mm Feed rate 5 - 24 m/min. Spindle arrangement: spindle 1 - bottom - 5,5 kW spindle 2 - right - 7,5 kW spindle 3 - left - drive together with right spindle spindle 4 - top - 7,5 kW spindle 5 - bottom - 4 kW Further equipment details: * pneumatic pressure in front of dressing spindle (infeed roller) * Table top with wooden inlay on the spindle on top * Insert segment spindle right for... more
Number of spindles 7 St.
Working width 230 mm
Working height 120 mm
Length of the planing table 2000 mm
Feed motor 3 kW
Feed speed 5-24 m/min.
Dimensions (L/W/H) 5200 x 2000 x 1900 mm
weight of the machine ca. 4500 kg
# 2545 Weinig Unimat 23 E with ATS control for width and height,
divide out of glazing bead possible
.....
Technical data summary
(please inquire about additional accessories)
.....
Generally
.....
> Working width: 230 mm
> Working height: 120 mm
> Number of spindles: 7 pcs.
>... more
- NEW -
GENERAL CHARACTERISTICS
Machine bed
Machine bed made of solid steel with generously dimensioned reinforcing ribs and load-bearing hollow body construction.
Worktables
Inlet table made of tubular steel with height adjustment using a parallelogram system. Worktables made from low-friction and highly wear-resistant special castings that have interchangeable inserts in front of the vertical spindles.
guides
Right inlet guide with cross adjustment via parallelogram system
with joint seam ... more
Max Timber Section - 220 x 120 mm
Minimum Timber Section - 30 x 6 mm
Infeed Table Length - 2500 mm
Spindle Diameters - 40 mm
Max Tool Diameter - 180
Spindle Speeds - 6000 rpm
5 Spindles
Bottom } 5.5kw Motor
Right } Single 5.5kw Motor for right and left spindles
Left
Top } 5.5kw Motor
Universal } 5.5kw Motor
Hr3dckyto
Electric Rise and Fall to top beam
Variable Feed Speed - 4.5 - 27 m/min
Cardan drive to feed rollers
Lift up soundproof hood with interlock
Motorised roller before planer
... more
new
Technische Daten: - Hobelbreite 20 - 230 mm
Bhhegptpiw
- Hobelhöhe 8 - 160 mm
- 5 Spindeln
- Spindel FI 40 mm
- Drehzahl 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 200 mm
- Linke Vertikalwelle max. Werkzeug FI 200 mm
- Dickenwelle, oben max. Werkzeug FI 200 mm
- 2. untere Welle max. Werkzeug FI 200 mm
Spindelfolge: 1. unten 7,5 kW
2. rechte vertikal 5,5 kW
3. linke vertikal 5,5 kW als Mobil... more
2014
excellent (used)
CATALOG NUMBER 5701
TECHNICAL DATA
- max width of workpiece 200mm
- max workpiece height 140mm
- number of spindles 5
1) horizontal bottom 200mm 5.5kW
2) vertical right 140mm 5.5kW
3) vertical left 140mm 5.5kW
4) horizontal top 200mm 5.5kW
5) horizontal bottom 200mm 5.5kW
- all spindles adjustable up / down, right / left
- 40mm spindle diameter
- spindle revolutions 6000 rev / min
in advance:
- 6 input, pulling, toothed, metal, including 1 double
- 2 output rollers, smooth, including 1 double
-... more
- Working width 400mm
- Working height 300mm
- 4 heads
- Heads with Tersa system
- 4 feeding rolls in the table
- feeder on kardan
- variable regulated feeder
Nlsr7 more
Working width 20 - 230 mm
Working height 8 - 120 mm
Planing table 2.5 m long
Spindle arrangement
1. First lower 5.5 kW, 6000 rpm,
2. First right 5.5 kW, 6000 rpm,
3. First left
4. First upper 5.5 kW, 6000 rpm,
5. Second below 7.5 kW, 6000 rpm,
Spindle diameter 40 mm
Feed system motor with brake; 4 kW.
Feed speed 6 and 12 m / min.
Feed height display with electronic digital display including memory function.
Bmpsqc0ulr
Waxilit pump manual for removing resin from the worktable
Machine operation... more
excellent (used)
Spindles: 6,
Spindle assembly: U (3 kW) - R (3 kW) - L (4 kW) - R (5.5 kW) - O (4 kW) - U (3 kW),
Feed: 2.2 kW,
Working width: 140 mm,
Working height: 120 mm,
long dressing table,
Tqf0878
Spindle diameter: 35 mm. more
used, good condition, hardly gelaufen
Bjnes8yygg
manufactured by Guilliet
built in 1989
Masch.-No. 1902
GS-approved
number of spindles 4
motors 3,7/3,7/3,7/5,5 kW
Motorbremsen
planing width ca. 180 mm
planing height ca. 120 mm
spindle diameter 30 mm
cutter system Brück turncutter
Vorfügefräser
cardan feeder
protective hood
feed speed 2 pc 6 + 12 m/min.
sliding rolls 1 piece im sliding shelf driven
electrical adjustment height
digital displays 2
exhaust connection D 120/120/140/160 mm
required ... more
new
- Hobelbreite 20 - 230 mm
- Hobelhöhe 8 - 160 mm
- 7 Spindeln (6+1)
- Spindel FI 40 mm
- Drehzahl 6000 U/min
- Vorschubgeschwindigkeit stufenlos 5 - 30 m/min
- Abrichtwelle, unten max. Werkzeug FI 145 mm
- Rechte Vertikalwelle max. Werkzeug FI 200 mm
- Linke Vertikalwelle max. Werkzeug FI 200 mm
- Dickenwelle, oben max. Werkzeug FI 200 mm
- Zweite obere Welle max. Werkzeug FI 200 mm
- Zweite untere Welle max. Werkzeug FI 200 mm
- Universalspindel max. Werkzeug FI 180 mm
C09i93eau
m... more
2009
excellent (used)
CATALOG NUMBER 5552
TECHNICAL DATA
- max width of workpiece 240mm
- max workpiece height 160mm
- number of spindles 4:
1) horizontal bottom 240mm 5.5kW
2) vertical right 160mm 5.5kW
3) vertical left 160mm 5.5kW
- 3 spindle electrically adjustable front / rear from the control panel
4) horizontal top 240mm 7.5kW
- 4 spindle electrically adjustable up / down from the control panel
- max rotational speed 6000obr / min
- all heads adjustable up / down, right left
- 40mm spindle diameter
in advance... more
Four side planer Weinig
type: U 17 N
year of manufacture 1980
Fe8qqxr
planning width 170 mm
planning height 120 mm
8 spindles:
1.bottom
2.right
3.left
4.right
5.top
6.bottom
7.top
8.universal
sliding rolls in the table
good working condition more
Machine meets all current requirements! We have the machine double and is underused. But works great.
Bmu7hx8zmo more
used, top condition, top equipment
manufactured by: Gubisch
type: B 230
built in: 1993
Masch.-No.: 15229
number of spindles: 5
spindle alignment: U - Re - Li - O - Uni
motors kW: 4,0 / 5,5 / 4,0 / 5,5 / 4,0
80uith
planing width ca. mm: max. 230 15 min
planing height ca. mm: max. 140 6 min
spindle diameter mm: 40
cardan feeder: Ja
pneumatic contact pressure der rolls: Ja
lateral Rollenandruck: Ja
protective hood / full covering: Ja
table lubrication Gleitmittelpumpe: Ja
feeder vor der surface pla... more
new
- Hobelbreite 20 - 330 mm
- Hobelhöhe 8 - 230 mm
- stufenloser Vorschub 5-25 m/min.
- Spindel FI 50 mm
Yfgnsys
- Drehzahl 6000 U/min
- untere Welle min. /max. Werkzeug FI 110 / 145 mm
- rechte Welle min. /max. Werkzeug FI 110 / 200 mm
- linke Welle min. /max. Werkzeug FI 110 / 200 mm
- obere Welle min. /max. Werkzeug FI 110 / 200 mm
- 2. obere Welle min./max. Werkzeug FI 110 / 200 mm
- untere Welle min. /max. Werkzeug FI 110 / 200 mm - 6 Spindeln
1. unten 11,0 kW
2. rechte vertikal 7... more
CATALOG NUMBER RC001
TECHNICAL DATA
max. width of the workpiece 20-200mm
max. workpiece height 8-120mm
number of spindles 4
1) horizontal lower 200mm
2) vertical right 120mm
3) vertical left 120mm
4) horizontal upper 200mm
total power 22.75kW
max. rotation speed of 6000 rpm
all heads adjustable up / down, right left
diameter of 40mm spindles
- in advance:
rolling pins, pulling, 6pcs including 4 double
pulling roller, rubber
- from down:
lateral pressure
rolling pin, toothed, pulling, torsi... more
WACO planing line with in and outfeed mechanization
- 2 pc. roller conveyors for wood packages
Bl98vfy0gl
- Roller conveyor at lifting table
- WEIDNER automatic infeed system
- WACO four side moulder, type Attack
9 spindles, max. planing width 250 mm
Max. feed speed 100 m/min
- Automatic outfeed system
- 4 pc. roller conveyors for wood packages more
WEINIG POWERMAT 400
6 SPINDLES
G7snhxp
BOTTOM-RIGHT-LEFT-RIGHT-TOP-BOTTOM
EXTRA ROLLERS FOR SHORT DISTANCE
POWERLOCK – HSK ON SPINDLES 3 + 4 + 5
40 MM SPINDLES ON 1+2+6
MEMORY SET – POWERCOM
CNC ADJUSTMENT LEFT SPINDLE RADIAL
CNC ADJUSTMENT TOP SPINDLE RADIAL
2 METER TABLE
MACHINE TABLE + FENCE WITH MARATHON COATING
CENTRAL POSITION OF GREASING POINTS
WAXILIT PUMP FOR TABLE GREASING
MACHINE IN PERFECT CONDITION more
ID000259Planer Jonsered H45KNManufacturer: Jonsered,Model: H45KN,Speed: 0 - 80 m/min,Heads: 6,Dimensions: 150 x 300 mm,Description: With electric box and hydraulic station. If you need more information about the equipment, please contact our manager.
Bwvlkch more
new
- max. Hobelbreite 180 mm
- max. Hobelhöhe 105 mm
- min. Hobelbreite 25 mm
- min. Hobelhöhe 10 mm
- Arbeitshöhe 920 mm
- min. Werkstücklänge bei Einzelelementen 350 mm
- min. Werkstücklänge bei Serie 250 mm
- Aufgabetischlänge 1700 mm
- Spindeldurchmesser 40 mm
- Durchmesser der Hobelköpfe 120 mm
- Länge horizontale Spindel 190 mm
- Länge vertikale Spindel 120 mm
- Fügefalzfräser 140 x 10 x 40 mm
- Drehzahl 6000 Upm.
Spindelfolge:
1. unten horizontal 4,0 kW
Bhhehcv0qy
2. rechte vertikal 4,... more
CATALOG NUMBER 5615
TECHNICAL DATA
- max width of workpiece 230mm
- max workpiece height 170mm
- number of spindles 6
1) lower horizontal 230mm 4kW
2) vertical right 170mm
3) vertical left 170mm 2 and 3 spindle 7.5kW
4) vertical right 170mm 4kW
5) horizontal top 230mm 5.5kW
6) lower horizontal 230mm 11kW
- all spindles adjustable up / down, right / left
- 40mm spindle diameter
- additional support guide on the 3rd and 4th spindle
- 5 spindle electrically adjustable up / down
- all spindles hav... more
working width: 180 mm
working height: 120 mm
working spindles: 4
spindle following: down, right, left, up
motor power spindle down: 3,7 kW
motor power spindle right: 3,7 kW
motor power spindle left: 3,7 kW
motor power spindle up: 5,5 kW
adjustment spindle down: -
adjustment spindle right: -
adjustment spindle left: electric, mobile spindle
adjustment spindle up: electric
cutter heads: turn cutter
feed speed: 2
feed pressure: feather
Bfeyniplso
current consumption: 38 A
motor brak... more
- NEW -
GENERAL CHARACTERISTICS
Machine body
Pipe stiffened monoblock steel machine body;
the vibrations are due to the considerable robustness
and reduced the weight of the machine frame to a minimum,
so that the high performance of the machine is guaranteed in the long run.
Bh8o7wg3oj
Worktable
Inlet table made of tubular steel construction;
Vertical adjustment using the parallelogram system.
Cast iron work table with low friction factor
and high wear resistance.
guide
Inlet guidance adjus... more
Rhino 800XL four side moulder
with 6 Spindles
bottom-right-left-top-top-bottom
Feed motor 7,5 KW with inverter 7-36 m/min
All 6 spindles 11.0 KW each with IE-3 energy efficient motors
Special 320 mm working width
50 mm spindles
Outboard bearings on all horizontal spindles
Motors and feed with brakes
Radial CNC controlled adjustment spindles 3 and 5
Infeed table 2 meter
Automatic table lubrication
Pneumatic chip breakers on top spindles
Pneumatic fence on left spindle
Bl989apt2m
Central ... more
ID000260Planer Jonsered H45BManufacturer: Jonsered,Model: H45B,Speed: 0 - 80 m/min,Heads: 7,Dimensions: 150 x 300 mm,Description: With electric box and hydraulic you need more information about the equipment, please contact our manager.
Ykln230x more
new
- Hobelbreite 20 - 320 mm
- Hobelhöhe 8 - 230 mm
- stufenloser Vorschub 5 - 25 m/min.
Dvjxmsmt
- Spindel FI 50 mm
- Drehzahl 6000 U/min
- untere Welle min. /max. Werkzeug FI 110 / 145 mm
- rechte Welle min. /max. Werkzeug FI 110 / 200 mm
- linke Welle min. /max. Werkzeug FI 110 / 200 mm
- obere Welle min. /max. Werkzeug FI 110 / 200 mm
- 2. untere Welle min./max. Werkzeug FI 110 / 200 mm Spindelanordnung:
1. unten 11,0 kW
2. rechte vertikal 7,5 kW
3. linke vertikal 7,5 kW
4. oben 11... more
CATALOG NO. 4472
TECHNICAL DATA
- max. Workpiece width 260mm
- max height of workpiece 130mm
G3ubni9zs
5 spindles:
1) Horizontal bottom 260mm 5.5kW
2) vertical right 130mm
3) vertical left 130mm (2i3) 5.5kW
4) horizontal upper 260mm 5.5kW
5) horizontal lower 260mm 5.5kW
- All heads are adjustable up / down, right / left
- diameter of spindles 40mm
- 4 in. Rollers, pulling, toothed, including 2 double
- from the top pulling shaft pulling, rubber double
- bottom pulling rubber pulling roller
- fe... more
used
Number of spindles 9 St.
Working width 230 mm
Working height 140 mm
feed 4-40 m/min
! Machine in order for sale !
SCM Topset 23 Version 32U
Number of spindles: 9 pcs.
Reinforced motors: 7.5 instead of 5.5 kW
Spindle assembly:
Dressing spindle / 2 x right / 2 x left / 2 x upper / 1 lower u.
1 glass bead saw
8 + 9 Sp horizontally adjustable via axis control, 9 sp (on / off, up / down)
Strip system automatic 3 u. 9 sp.
Horizontal spindles with axis control up / down (mass adjustment)
Vert... more
VierseitenhobelFabrikat: CasadeiTyp: MATRIX 230 / 5NeumaschineAutomatische Vierseitenhobelmaschine und Kehlautomat mit Quick-Set Schnelleinstellsystem; bedienungsfreundlich, zuverlässig und stabil Für Werkstücke bis max. 230 x 120 mm Spanabnahme bis 6 mm einstellbar Mit Direkt-Anlauf Rohrversteifter Monoblock-Maschinenständer gewährleistet einen vibrationsarmen Lauf Einlaufführung über präzises Parallelogrammsystem bequem manuell verstellbar Vorabrichten des Werkstückes auf der rechten Seite mit... more
Weinig U17A moulder
- Spindles No. 6 + Uni
- variable feed speed 6,3 – 36,3 m/min
Igj3jyyfg
- motorized elevation more