Hydraulic Clamps (manual height adjustable) 8 pieces
Position adjustment Vende device 2 pieces
Vinkel and lift roller 4/2 pieces
Longitudinal feed rollers driven 2 pieces
Stock loader 2 pieces
Electronically adjustable cutting height with stepless speed via display
Max. Trunk passage Ø 1200 mm
Wheel diameter 1100 mm
Wheel width 90 mm
Max. Height of a section 450 mm
Max. Saw belt stroke 840 mm
Min. Thickness of last cut 25mm
Hydraulic saw blade tensioning
Saw head width 3020 mm
Stable cross conveyor / steep conveyor with 5 chain strands.
Conveyor length approx. 2.150. Shaft 90 mm diameter.
Chain spacing: 1000 - 750 - 1000 - 1000 mm.
Rising from 740 to 1.250 mm. Drive motor SEW 7,5 KW.
Sturdy chains 125 x 40 x 12 mm. Chains with carrier.
Steel bearing housing. Very good condition.
LBL Brenta log bandsaw line
Type Bibat 1400 Tandem + CT600 + FL
- Length transport with outfeed system
- KEBA cubic log measuring system
- Cross chain transport
- Log carriage , type FL
- Rope feeding unit for log carriage
- Control cabin with Evolution II controller + Microtec Optiline
- Canter, type CT600
- Tandem bandsaw machine, type Bibat 1400
- Outfeed roller conveyor
- Cross chain transport for boards
8 strand cross conveyor with sheet metal lining between all 8 chain strands, driving chains and gear motor drive, conveyor length approx. 2.0 m, conveyor width approx. 4.5 m, following inclined roller conveyor with 10 driven rollers on 6 m length and gear motor drive, can also be separated
1100 030 Sawmill infeed SPRINGER
consisting of two separately usable plants,
scope: 2 x feeding table with separation - 1 x measuring - 2 x turning tower - 2 x cross conveyor,
Year of construction: 2008,
feed stepless: 50 - 160 m/min,
log length: 2,5 - 6,2 m,
pigtail diameter: 10 - 45 cm,
stick diameter: max 60 cm,
plant is still in operation until April 2021 and can be visited at any time
Fast infeed for logs into the creel. Installed in 2007 - in operation until 2017.
S - design. For cutting length up to 6 meters. With large Rexroth hydraulic unit. Squared timber centring. Hydraulic chain tensioner.
Timber feed from the right.
Saw mill ARI System 35
complete Circular saw mill
The system 35 is a high-performance-plant, for Flexibility in various wood types and at the same time top cutting accuracy.
The plant includes:
- infeed and conveying mechanization to the initial cut circular saw
- initial cut circular saw ARI KS 12
- resaw machine ARI DS 8
- resaw machine ARI DS 8 – 2
- Mechanization for further transport
- cut-off saw ARI KL 10 left side
- trimmer ARI KT 5
Board stackerManufacturer: Rosens Maskin AB,Production year: 2004,Board stacking arms: 5,Lifting arms: 4,Board size: up to 6 m,Speed: till 70 m.Description: Stacker stands after moulder with feed roller you need more information about the equipment, please contact our manager.
4 blade construction wood circular saw Schuhmacher overhauled
cutting height 350mm
Driven roller conveyor - extension rollers next to the saw blades
Chain infeed up to 6m timber length, with infeed mandrels that can be set up via foot switch
Feed infinitely variable
Electrical cutting width adjustment
4 pieces saw motors, power 4 x 18 kW
4 pcs. pull-out roller motors, power 4 x 0,37 kW
1 piece feed gear, power 2.2 kW
1 piece Cutting width adjustment motor, power 0.18 kW
Total power 76 kW
Line for making packages of sawn wood, wet or dry.
Consist of below main parts:
- Side conveyor
- Roller conveyor for even ends
- Packing machine
- Roller conveyor for ready made packages.
- Electrical controls
Complete sawmill with
log feeding for log length 3 -5 meters
diameter up to 1,2 meter
Metal detector Mesutronic
Log crosscut saw
Root reducer Bruks
Log band saw carriage Primultini - 3 trestles
Log band saw Canali-Pacific with 1600 mm rollers
Primultini double band resaw
Trimming circular saw Esterer BNK 200
Lumber sorting with belt boxes
Complete disposal with drum chipper Rudnick Enners
Scraper conveyor, screen
Complete warping room Vollmer
With Vollmer CAL 30...
Logyard with large feed table, for 3 truck loads,
separation, root reducer Hombak, transfer into measuring, Jörg, calibratable, curvature detection. Stihl chain crosscut saw for clean cut, infeed into crosscut line with stop carriage, labelling, infeed into sorting line with 30 boxes.
Easily dismountable with gantry crane over the whole place.
Price 148 000.-- + VAT.
Complete line de stacking - stacking line- feed pack chain conveyor,- tilt hoist,- cross conveyor,- spacer belt conveyor,- elevator,- separator,- cross conveyor with roller conveyor with pushers one side,- stacker,- chain conveyor outfeed for you need more information about the equipment, please contact our manager.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.