5 head moulder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5-HEAD MOULDER MATTISON 229 5-HEAD MOULDER MATTISON 229 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. MATTISON 229 PUSH FEED Moulder -- 5-Head, 8" x 4" cap.; lag bed, random length hopper feed. - Head sequence: Top 15 HP, left 7.5 HP, right 10 HP, top 15 HP and bottom 20 HP motors. -- Spindles: 2-1/8" dia. horizontal spindles dia. with outboard bearings - 3,500 RPM, and 1-13/16" dia. vertical spindles w/tilt - 3,600 RPM; 10 HP 4-step feed speed for variable speeds from 18 - 90 FPM. Cgynx more
Weinig 6 Head Moulder Weinig  U23EL Weinig 6 Head Moulder Weinig  U23EL 6
Weinig U23EL 6 Head Moulder Bottom Head 15 H.P. Right Side Head 15 H.P. Left Side Head 15 H.P. Top Head 20 H.P. Top Head 20 H.P. Bottom Head 15 H.P. 40 MM Diameter Spindles 8000 RPM ATS Positioning Right & Left Spindle 7.5 H.P Feed Motor 18-18 FPM 4 Driven Bed Rollers EM 11 Hydraulic Hopper Feeder Approximately 30 Cutterheads Included Year 2000 C3ygq more
Copy spindle moulder 2-heads Bacci 2 head Copy spindle moulder 2-heads Bacci 2 head 5
I sell the 2-head copy spindle moulder BACCI C8inz more
Four Side, Eight Head Moulder TOS SVITAVY FP 160 (Two Universal Heads!) Four Side, Eight Head Moulder TOS SVITAVY FP 160 (Two Universal Heads!) 6
Four Side, Eight Head Moulder TOS SVITAVY Type/Model: FP 160 Condition: very good (machine was completely renovated) The machine is designed for processing the exact details of the four sides in one pass, such as parquet flooring, paneling, etc. Technical Data: • Max working width: 180mm • Max working height: 130mm • The system heads: D, R, D, L, R, U, Univ., Univ. • Electric and manual pressure adjustment of the material • New Control • Engines power from 4 kW to 7.5 kW, • Spindles from 6000 ... more
5 Head Moulder Spanevello MEC185 5 Head Moulder Spanevello MEC185 3
Spanevello MEC 185 - Grooved table Year 1983 Working width/height: 180mm/120mm 5 spindle: 1.spindle bottom 3kW 2.spindle right 3kW 3.spindle left 4,1kW 4.spindle top 4,1kW 5.spindle universal spindle 180° (bottom-top-left) 4,1kW Diameter of shafts 40mm Spinle rotation 6.000 1/min Trough feed with back-gear shafting. (no chains or cardan joints) Feed speed 4 - 23 m/min. Machine weight ~2240kg Machine dimensions LxWxH: 3870x1030x1600mm Available from the middle of November 2016, currently st... more
7 head moulder Weinig Powermat 500 7 head moulder Weinig Powermat 500 6
Powermat 500, powerlock system, 7 heads, speed 36 m/min. Machine used only for 8 months. Cbk3b more
5-HEAD MOULDER MATTISON 229 5-HEAD MOULDER MATTISON 229 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. MATTISON 229 PUSH FEED Moulder -- 5-Head, 8" x 4" cap.; lag bed, random length hopper feed. - Head sequence: Top 15 HP, left 10 HP, right 10 HP, top 20 HP and bottom 20 HP motors. -- Spindles: 2-1/8" dia. horizontal spindles dia. with outboard bearings - 3,500 RPM, and 1-13/16" dia. vertical spindles w/tilt - 3,600 RPM; 10 HP 4-step feed speed for variable speeds from 18 - 90 FPM. Cgyny more
MOULDER KENTWOOD P 407 MOULDER KENTWOOD P 407 1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. KENTWOOD P407 Through Feed Planer/Moulder: working dimensions of 0.8"- 7" width cap. and 0.39" to 4" thick. Planer with limited profiling! -- Head sequence: Bottom & top share a 10 HP, Right and left also share a 10 HP. -- Spindle dia. 35 mm with 6,000 RPM spindle speed; the spindles are equipped with mechanical digital read outs for quick set up and accuracy. -- Feed: 1 HP single speed motor: 30 FPM -- A 6' in feed table, with a side pressure roller... more
Twin Head Wide Belt Sander Houfek Twin Head Wide Belt Sander Houfek 4
Houfek Bulldog SPB 1010RC Twin Head Wide Belt Sander - 2001 CE C9pcy more
Moulder WADKIN GA 170 / 2 SU Moulder WADKIN GA 170 / 2 SU 2
Capacity: in 180 x 130 mm., out 170 x 120 mm Feed speed: 6 to 28 m/min, 2,2 kW motor Cardan shaft drive Pneumatic pressures Spindles: 8 Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 5,5 kW, top 11 kW, top 7,5 kW, bottom 5,5 kW, universal 5,5 kW Spindles 40 mm diameter Spindle speed: 6000 rpm Mechanical digital read-out Infeed table length: 2 m. Max. cut on 1st spindle: 10 mm. Min tool diameter: 100 mm, max tool diameter: 180 mm on first and universal spindle, 195 mm on vertical spindles, 200 m... more
Wide moulder 6 sp. (1025x200mm) KUPFERMUEHLE VUIN 1025 Wide moulder 6 sp. (1025x200mm) KUPFERMUEHLE VUIN 1025 6
KUPFERMUeHLE wide moulder, type VUIN 1025 Machine specifications - Planing width 1025 mm - Planing height 200 mm - Feed speed 7 - 24 m/min Spindle lay-out: 1. Horizontal bottom spindle 7.5 kW 2. Horizontal top spindle 11 kW 3. Horizontal top spindle 3 kW (groove spindle) 4. Vertical right spindle 5.5 kW 5. Vertical left spindle 5.5 kW 6. Horizontal bottom spindle 5.5 kW - Driven feeding rollers in table - Driven out feeding rollers - Complete with tooling and accessories Ckvpg more
Dividing Head Stankoimport A250 Dividing Head Stankoimport A250 4
Dividing head, dividing head inside diameter bore 23 mm mandrel recording MK4 peak height 130 mm feed intake M52 x 3 mm translation 1:40 Weight 50 kg Bw0xj more
Tiscfhfraese rigid moulder Stehle Tiscfhfraese rigid moulder Stehle 6
Table: 120 x 80 cm Milling: 30 mm Capacity: 3.7 kW Right-left run Drehzhalen: 2xelektr. switchable, 4 levels: 3000/5000/6000/10000 RPM. Metal stop JAWS fence with fine adjustment Without milling or feed. C93zk more
MOULDER (FEED THROUGH) LEADERMAC LMC-623P MOULDER (FEED THROUGH) LEADERMAC LMC-623P 1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. LEADERMAC 623P PLATINUM Feed Through Moulder -- 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 7,200 RPM. All spindles equipped with electronic digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elem... more
Spindle moulder Schroeder Spindle moulder Schroeder 5
Good day! I would like to offer the following machine: 1 used spindle moulder Schroeder -Table size 1 m x 1 m -Pole-changing motor -6-speed -30s spike -Stop with a fine adjustment -Right - and left-hand rotation -Stop 360° rotatable The machine is older but functional. Are sold without any warranty and guarantee. B0rdh more
Moulder WADKIN GEM 205 / 247 4S Moulder WADKIN GEM 205 / 247 4S 4
Capacity 230 x 130 mm. Spindles: 7 Bottom 3,7kW, fence 3,7kW, near 7,5kW, fence 3,7kW, top 7,5kW, top 7,5kW, bottom 7,5kW Spindle diameter: 40 mm. Feedmotor 2,2 kW Cidz7 more
Spindle Moulder Frommia Typ 700 Spindle Moulder Frommia Typ 700 5
Spindle moulder, spindle moulder, spindle moulder with fixed spindle speeds 2500/4500/5000/6000/9000/12000 -6 U / min with 3-roll feed spindle diameter 30 mm Weight 460 kg Bw0wc more
Dividing head Schmidt SPH 250 mm Dividing head Schmidt SPH 250 mm 4
Dividing head make Schmidt 24 he Division direct Division Tip height: 250 mm Diameter Chuck: 200 mm Chk8f more
CROSS BELT (2-HEAD 10') TAGLIABUE CAT-D2-260 CROSS BELT (2-HEAD 10') TAGLIABUE CAT-D2-260 1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. TAGLIABUE CAT-D2-260 Cross Belt Sander with (2) Sanding Heads; 2-Head, 2,600 mm (102.4") max. working width. -- 1st Head: Air actuated air bladder finishing platen, 25/30 HP - 2-speed motor, 12 or 24 m/Sec (39 or 78 FPS) abrasive belt speed, 11,070 x 150 mm (435" x 5.9") abrasive belt size. -- 2nd Head: Air actuated air bladder finishing platen, 25/30 HP - 2-speed motor, 12 or 24 m/Sec (39 or 78 FPS) abrasive belt speed, 11,070 x 150 mm (435" x 5.9... more
Spindle moulder Schneider Spindle moulder Schneider 6
Good day! I would like to offer the following machine: 1 used spindle moulder cutter -Table size 1 m x 0.9 m -Pole-reversible motor -6-speed -4 KW 380 Volt motor -30s spike -Stop with a fine adjustment -Right - and left-hand rotation -Control tool -Stop 360° rotatable -Suction nozzle -good condition The machine is older but functional. Are sold without any warranty and guarantee. B0rdp more
moulder WEINIG H 22 B moulder WEINIG H 22 B 5
Capacity: 220 x 120 mm. Spindles: 8 Bottom 7,5 kW, fence 5,5 kW, near 7,5kW, 2nd fence 7,5 kW, 2nd near 7,5 kW, top 7,5 kW, top 5,5 kW, bottom 5,5 kW Free space for bottom head between the 2 top heads Outboard bearings for the spindles 1, 6, 7 and 8 Straight jointer for the spindle 7 Profile jointer for spindle 8 Spindle speed: 6000 t/min Cardan shaft drive Inermediate driven feedrollers for short pieces Pneumatic pressures Manual bed lubrication Spindle diameter: 50 mm. Feedspeed: 6 - 48 m/mi... more
Moulder 8 sp. - 60 m/min + Infeed WEINIG Hydromat 22 BL Moulder 8 sp. - 60 m/min + Infeed WEINIG Hydromat 22 BL 4
WEINIG moulder, type Hydromat 22 BL Manufacture year 1991 Machine specifications: - Planing width max. 220 mm - Planing height max. 120 mm - Hydraulic feeding, motor 15 kW - Feed speed 6 – 60 m/min Spindle layout: 1. Horizontal bottom spindle, 15 kW 2. Horizontal top spindle, 15 kW 3. Vertical spindle right, 15 kW 4. Vertical spindle left, 15 kW 5. Vertical spindle right, 15 kW 6. Vertical spindle left, 15 kW 7. Horizontal top spindle, 11 kW 8. Horizontal bottom spindle, 15 kW - Shor... more
Universal milling head R&E MK5 Universal milling head R&E MK5 5
Universal milling head, milling cutter holding fixture, Fräsverlängerung, angle milling br / -Ersatzteil of an R & D br / recording output MK5 br / recording input gear br / br -complete swivel / -Rezes recording mm br / br -Lochkreis mm / hub moved about 150 mm br / -dimensions 720/630 / H740 mm br / -Weight 400 kg B9gh7 more
Tilting spindle moulder Panhans 259 Tilting spindle moulder Panhans 259 6
Sturdy swivel milling machine by Panhans Speeds 3000, 4500, 6000 and 9000 RPM Pole-reversible drive motor 4.7 / 5, 9kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees by hand crank adjustable Height adjustment with hand crank Spindle diameter 30 mm Stop rotating Table extension on both sides and pull-out workpiece support Shaper fence with fine adjustment Heavy cast iron JAWS with 2 Einlegelinealen 3-roll feed Haffner 8-speed R/L barrel 2 dust nozzle 120 m... more
BRUSH SANDER (2-HEAD) BOERE SELECT 1300 BB BRUSH SANDER (2-HEAD) BOERE SELECT 1300 BB 1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. BOERE SELECT 1300 BB Structuring brush machineEquipped with (2) oscillating structuring brushes. Both brushes are adjustable in depth by hand-wheel. Mechanic digital read-out for fine-adjustment of the structuring brushes. The standard oscillating travel is 20 mm (0.8"), and can be deactivated. 2-way direction for both brush rollers. Both heads driven by 7,5 kW (10 HP) motors. -- Feed system: Conveyor belt with feed rates 4 - 15 m/min. (13 - 50 FPM) with... more
2 head stitching machine Hohner Accord 10 2 head stitching machine Hohner Accord 10 2
2 head stitching machine C97g9 more
deviding head + Forkhardt 3-jaw chuck Walter VTW 5 deviding head + Forkhardt 3-jaw chuck Walter VTW 5 6
for sale 1 piece: dividing head, rotary table Walter VTW 5 with Forkhardt 3-jaw chuck 250 mm make: Walter type: VTW 5 top condition, checked, ready to use characteristics: Forkhardt 3-jaw chuck 250 mm opening bore 70 mm useable horizontally or vertically peak hight 210 mm latch every 15° weight ca. 150 kg shipping: Shipping worldwide. Please contact us for further shipping details for your desired location. C90xc more
Drilling heads Bohrgetriebe u Drilling heads Bohrgetriebe u 2
Manufacturer: Bohrgetriebe, Stück Bohrgetriebe : 1, Number of drilling spindles: 7, Bauhöhe: 60, Preis pro Stück Euro: 100, Bzapg more
Copy of head MAS KOVOSVIT Copy of head MAS KOVOSVIT 5
Copy subhead copy Headboard copy head for cam dimensions 900/400/H270 mm Weight 90 kg Bw2fi more
CNC - head lathe VEB Zerbst DP4000 VEB Zerbst DP4000 CNC - head lathe VEB Zerbst DP4000 VEB Zerbst DP4000 5
1 used CNC Facing Lathe Manufacturer: VEB Zerbst type: DP4000 machine number: 37-073 Faceplate diameter: 4000mm additional arms Siemens SINUMERIK control Prokon (5 programs can be saved) Beistellsupporte feed Year: 1968 Weight: 45to. Delivery: loaded free of payment: before collection B2udw more
MOULDER (FEED THROUGH) LEADERMAC LMC-518S MOULDER (FEED THROUGH) LEADERMAC LMC-518S 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. LEADERMAC LMC 518 S "SMARTMAC" Feed Through Moulder; 5-Head (B-R-L-T-B) with a working cap. of 7" x 5".Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP [...] dia. 40 MM with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st. bottom head with mechanical digital readouts. Pneumatic receding chipbreaker for top spindle. Mechanical digital readout for chipbreaker and pressure [...] system: Variable speed 20 - 85 FPM, by a... more
Spindle moulder Baeuerle SFM 0 Spindle moulder Baeuerle SFM 0 6
Spindle diameter: 30 mm Power: 3 kW Maps: 2 motor, 4 speed settings Table: 900 x 700 mm With stop baking C90aw more
Planer Moulder Kuper SWT XL Planer Moulder Kuper SWT XL 1
Kuper SWT XL 2011 6 Head Moulder Pre Straightening Touch Screen Control Bed Rollers Feed by Inverer C0cbj more
Drilling heads Bohrköpfe u Drilling heads Bohrköpfe u 2

Drilling heads Bohrköpfe u

Petershagen Germany
6471 km
USED
Manufacturer: Bohrköpfe, Stück Bohrgetriebe : 2, Number of drilling spindles: 10, Raster: 32, gelaufen auf Maschine: Biesse, Schnellwechselfutter: yes, Bauhöhe: 60, Anschlusspindel mm: 16, Preis pro Stück Euro: 300, By37v more
Thread-tapping head with Strehler JAWS REMS 1/2"-2" Zoll Thread-tapping head with Strehler JAWS REMS 1/2"-2" Zoll 4
Die head with chasers, thread die stock, threading machine, pipe thread cutter, thread 1/2 "-2" inch Weight 15 kg Bw202 more
Moulder 5 sp.  WEINIG Hydromat 22 BL Moulder 5 sp.  WEINIG Hydromat 22 BL 6

Moulder 5 sp. WEINIG Hydromat 22 BL

Hardinxveld-Giessendam Netherlands
6235 km
1985
USED
WEINIG moulder, type Hydromat 22 BL Manufacture year 1985 Machine specifications: - Planing width max. 220 mm - Planing height max. 120 mm - Electric feeding, motor 7.5 kW - Feed speed 8 – 48 m/min Spindle layout: 1. Horizontal bottom spindle, 7.5 kW 2. Vertical spindle right, 7.5 kW 3. Vertical spindle left, 7.5 kW 4. Horizontal top spindle, 11 kW 5. Horizontal bottom spindle, 15 kW - Short infeed table - 4 pc. feeded table rollers - ATS system for spindle 3 + 4 - Spindle 1+4+5 w... more
MOULDER (FEED THROUGH) WADKIN XE-454 MOULDER (FEED THROUGH) WADKIN XE-454 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. WADKIN XE-454 Moulder Feed -Through;5-Head (B-R-L-T-B), with working dimension 8-5/8" x 4-3/4".Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP and bottom 15 HP [...]: -- Diameter 1-13/16" with cutterhead speed of 6,000 RPM. -- Hydro grip outboard bearings on spindles 5 and 6. -- Mechanical digital readouts on all head adjustments, except 1st bottom. -- Profile jointers (cartridge type) on spindles 2,3,4 and [...]: -- Mechanical Driv... more
bread long moulder Kemper SU-L bread long moulder Kemper SU-L 3

bread long moulder Kemper SU-L

Bielefeld Germany
6457 km
1995
USED
- analog control - on rolls - year of the construction 1995 - 380V 50Hz Dimensions: High: 120 cm Width: 190 cm Depth: 90 cm Bxx9v more
Twin head roller coater Giardina G 80 Twin Head Twin head roller coater Giardina G 80 Twin Head 1
- Producer Giardina - Type G 80 Twin Head - Year of construction 1993 - Working width 1300 mm - Working height 900 mm - Operating side, left - Roller for lacquer 45 Shore - Roller for lacquer, roller 2 45 Shore - Metering roller hard chormed ca. 160 mm - Reverse drive 2 Stk. - Automatic up and down adjustment for rollers - Belt transport system - Transport belt solvent stable - Double diaphragm pump 2 Stk. - Length 2300 mm - Width 2490 mm - Height 2150 mm - Voltage / HZ... more
Head of part of WMW mit Gegenlager Head of part of WMW mit Gegenlager 5
-Part head-turning length 450 mm SK40-suited for cutter grinding-translation 1:40 pivotally-Weight 60 kg Bwzcc more
Angular Head KOLB Angular Head KOLB 2

Angular Head KOLB

Düsseldorf Germany
6387 km
USED
throat 500 mm tool adaptor ISO 50 power requirement 0 kW tool taper ISO 40 total power requirement kW weight of the machine ca. 0,1 t dimensions of the machine ca. m Bydde more
MOULDERS (FEED THROUGH) LEADERMAC LMC-923 MOULDERS (FEED THROUGH) LEADERMAC LMC-923 1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. LEADERMAC LMC-923 Feed Through Moulder, 9-Heads:(B-R-L-R-L-L-L-T-B), 9-3/8" x 6-1/2" capacity. -- Head Sequence/Motors: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, right 7.5 HP, left: 7.5 HP, left 7.5 HP, left 7.5 HP, top 7.5 HP and bottom 7.5 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All left spindles with motorized width adjustment with LED display and keypad [...] System: -- Variable feed adjustment of 20 to 82 FPM, 5 HP feed ... more
Standard: - continuous temperature adjustment - continuous air amount adjustment - separate interlocked main switch for heating and nozzle - integrated device protection. - heating element pipe with protective tube C9zrn more
Turninggears - positioner - welding crane Double head Lincoln welding derrick 30 000 mm length Turninggears - positioner - welding crane Double head Lincoln welding derrick 30 000 mm length 4
for manufacturing overhead traveling cranes, trailerchassis, H-beams,... (2x) Lincoln Idealarc DC-1000 amp weldingunits - arc welding independant heightadjustment + camera (videocontrol) Turnable main beam, chassis on rails max weldinglength: 30 000 mm max weldingwidth between heads: 3000 для производства кранов, балок, шасси для прицеп... more
Drilling heads Biesse u Drilling heads Biesse u 1

Drilling heads Biesse u

Petershagen Germany
6471 km
1999
USED
Manufacturer: Bohrköpfe, Year: 1999, Stück Bohrgetriebe : 4, Number of drilling spindles: 7, Raster: 32, gelaufen auf Maschine: Biesse Techo, Schnellwechselfutter: yes, Bauhöhe: ca.60, Anschlusspindel mm: 16, Preis pro Stück Euro: 200, Wight approx. kg: 1,5, Year :1999 Bzapf more
Thread-tapping head with Strehler JAWS REMS bis M27 / 11/2" Zoll Thread-tapping head with Strehler JAWS REMS bis M27 / 11/2" Zoll 5
Die head with chasers, thread die stock, threading machine, pipe thread cutting metric thread M14-M27, thread 1/4 "-11 / 2" inch crate-Weight 24 kg Bw2tl more
various magnetic head pulles Doppstadt various magnetic head pulles Doppstadt 5
various magnetic head pulleys for discharge conveyors, e. g. Doppstadt AK 430, DW 2560, SM 518, SM 620 etc. C9x8c more
MOULDER WITH LATERAL INFEED WEINIG U GOLD MOULDER WITH LATERAL INFEED WEINIG U GOLD 1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. WEINIG UNIMAT GOLD Feed Through Moulder w/lateral Infeed:6-Head (B-R-L-T-T-B), working cap. 9 1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right 10 HP, left 15HP, top 15 HP, top 20 HP and bottom 15 HP motor. Mechanical brakes on all motors. -- Spindle Dia: 1-13/16" with cutterhead speed of 6,000 RPM. Mechanical digital readouts on all spindles, Digiset readouts on left & top spindle, mechanical readouts on chipbreaker & pressure element of to spindles. ... more

to

to

Change search
Try out the Machineseeker app now!
Machineseeker app for iPhone and Android.