passage width : 900 mm
passage height : 150 mm
table surface : 1140x1300 mm
Roller diameter : 196 mm
Weight : 800 Kg
Mafle : 2700 X 1310 X 1525 mm
working height : 800 mm
All information without guarantee.
Dgzjykknc
A demonstration under power is possible at any time in our exhibition hall.
Make: Illig
Model: VHW 90/2
Year: 1995
Availability: Immediately
Max Material Width: 900 mm
Max Material Thickness: 1.8 mm
Total Connected Load : 36.0 kW
Bnmcoq0d9r
Max Temperature Heating Rolls: 140 °C
Material Wrap Around: 563 Grad
750mm TFT Model FCS 750 Automatic Pressure Former. Forming, Punch And Stacking Stations. Hydraulic 2003
* Motorized Sheet Unwinder 1200 mm max dia
* Max sheet width 900mm
* Upper forming depth 120mm
Bq2q8q9hwx
* Lower forming depth 120mm
* 750 mm x 530 mm Form Area
* Max sheet traverse 530mm
* 150 mm Max depth of draw positive
* 170 mm Max. mould height
* 250/780 mm Sheet width min./max.
* 730 mm x 500 mm Max cut dimension
* Max dry cycle speed 40 cpm
* Upper heating 31.2kw
* lower heating 31....
The Illig SB 74/10 C DIN thermoforming machine is used to make blister packs, it consists of a forming table (a heating zone of the material which is then thermoformed under vacuum) and a cross-cut area per plate which is routed at the end of the line by a conveyor belt.
All mobile modules of the basic machine are driven by the pneumatic system. All machine functions can be performed during the running-in of the machine in manual mode. After determining the perfect parameters, the machine opera...
working pressure: 6 bar
workpiece height max.: ohne Tisch: 350 mm
workpiece height max.: mit Tisch: ca.150 mm
foil width: ca.800 mm
cycle time: 32 sec
control: Siemens S5
voltage: 220 AC V / Hz
total power requirement: 119 kVA
weight of the machine ca.: ca. 9,5 t
space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m
THERMO FORMING MACHINE for vacuum forming and laminating of interior panelling in vehicle construction with films and textiles.
Additionally to this Machine a Laminating Pr...
Bed size 880 x 630 mm
Outer edge seal 950 x 700
Inside edge seal 880 x 630
Double heater
6 heat settings for the top heater
1 setting for the bottom heater
Vacuum pump included
Vacuum tanks included
Ojdgl
Top air ramp for blowing domes
1 Universal forming machine ILLIG Typ UA 100 ED + BE-P for sheets
with sheet loader and upper pre heating device
max. forming area 960 x 560 mm
max. sheet size 1000 x 600 mm
max. depth 300 mm positive/negative
year 1985
- top heater ceramic elements whole field regulation
Cvciago8
- bottom heater ceramic elements whole field regulation
- parallel clamping frame
- 4 cooling fans
- pre blow- and blow off automatic
- plug assist
- automatic control of foil sacking by photo cell
- front door for ...
Manufacturer Illig
0al9fwz9
Model VHW 90b
Year 2005
Condition Very good
Max material width 900 mm
Max material thickness 1.0 mm
Max temperature of heating rolls 140 °C
Material wrap around 563 Grad
Total connected load 36.0 kW
Illig communication Profibus
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
Machines direct from the manufacturer!
The ORIGINAL made in AUSTRIA!
ULTRAFORMER
The Multi-Tasking Thermopress-Unit!
>A TRULY UNIVERSAL MACHINE with endless production opportunities.
>Infinite possibilities in WOOD, PLASTICS and SPECIAL COMPONENTS MANUFACTURING.
>REALISATION of challenging and demanding projects.
ULTRAFORMER 6 in ONE production capabilities:
● THERMOFORMING of plastics with a thickness of up to 6mm!
The permanent hot air stream allows you to thermoform difficult plastics on a ...
Completely automated machine for production of plastic flower pots and cups:
- Thermoshape group:
Max. diameter of the article – 140 mm
Max. height of the article – 160 mm
- Productivity:
Article 0.5 l – 900 pcs/hour
Article 0.3 l – 1100 pcs/hour
31 kg/hour
- Heaters power – 2.3 kW
- Size:
Length x width x height – 1120 x 1220 x 2040 mm
Crystalizer and Dryer type Conair, USA, together with the Extruder making one continuous system for producing PET sheet from 100% waste material.
...
Make Illig
Model RV 74b
Year 2008
Bnl8sh9z8q
Approx Hours 19,500
Condition Excellent
Delivery date Immediately
Location UK
Stations Three
Maximum forming area 704 x 514 mm
Minimum forming area 400 x 250 mm
Depth of Draw 120/40 mm
Max film width 760 mm
Sheet thickness range 0.18 - 2 mm
Operating pressure 2 bar
Max dry cycles / min 30
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
Fomring - Cutting - Stacking
Technical details
Max. Forming Area cutting station:870x650 mm
Depth(positive & negative): 120 mm
Film Width: 250 mm min - 900 mm max
Cvcjipq8
Max. Material Thickness:1.8 mm
Make Illig
Model RDKP 54g
Year 2010
Approx Hours 28,000
Stations Three
Delivery Date Immediately
Max Forming Area 560 x 410 mm
Max Tool Size 585 x 435 mm
Depth of Draw 120 / 120 mm
Max Material Width 610 mm
Max Mould Closing Force 120 kN
Xnpsb782
Max Cycles-Minute 55
Forming Pressure 6-10 bar
Approx Total Length 5030 mm
Approx Total Width 3420 mm
Approx Total Height 2680 mm
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
Mould: 900x1900mm, punching force: 15kN, mould part height: -450 to 400mm, heating system: IR control field, top and bottom heating, controls: SIEMENS S5.
Oh7n7
Forming size: 680 x 540 mm
Film max width: 750 mm
Material thickness: 0.20 -2.00 mm
Top + bottom heating plates (New in 2018)
Forming station with:
- Top and Bottom forming table / Indramat servo drive
- 2-station pneumatic clamping
Ber9cgol3v
Transport Chain with Servo Drive
Hole punching with AC Drive
Cutting station Typ DSB 72 VKU with moveable bottom table / AC Motor
Stacking station
1 Hydraulic double upright press 400 to
in the overhauled TOP STATE
ATTENTION see PDF offer in the attachment in cooperation with
our press specialist / partner company -company EP Pressentechnik/RNB / Mr. Eiblmeier
We also offer general 100% service in all areas and
New - and used presses,special field a.o. Composite,extensive references in the industry are available!!!!
Manufacturer: INO Press - Pressentechnik Waiblingen(constructor Mr. Eiblmeier)
Model/Type 100 K-400
Year of manufacture 2000
...
1 Universal forming machine ILLIG Typ UA 200/G for sheets
max. forming area 1950 x 950 mm
max. sheet size 2000 x 1000 mm
max. mold height 700 mm with double heating
year 1992, 91,2 kW/146 Amp.
- top heater ceramic elements 3 zone regulation with single on/off
For size reduction
- bottom heater ceramic elements 3 zone regulation
- All production data and heating adjustments can be stored on a disc
- parallel clamping frame with quick frame locking system for top and bottom
Clampin...
Manufacturer Kiefel
Model KMD 78 BFS
Year 2008
Condition Excellent
Approx hours 18,000
Delivery date Immediately
Stations Three (with BFS facility)
Maximum forming area 760 x 540 mm
Minimum forming area 375 x 270 mm
Max tool dimensions 780 x 560 mm
Depth of draw 150 mm +/-
Puq7im
Sheet thickness range 0.2 - 1.8mm
Max film width 810 mm
Operating pressure 6 bar
Max dry cycles / min 70
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
E...
Heating element with infinitely variable power controller
Bjgbiz7rlo
Ø 3,3 mm
working lengths: 550 mm
Water cooling:
A system operating on the gravity principle with a 50 litre drink, 1.5 litre water protection (against algae formation), a submersible pump (230 V, 90 W) with on/off switch, a reducing valve (to be mounted on the outlet side), 2 x 1.5 m hose, 6 hose clamps, bending template type BS Beta 550
Thermoforming machine with central lubrication pump, upper u. Below heating plates, pneum. Upper stamp, ILLIG stacking.
Molding surface (mm) 680x450
Foil width (mm) 700
Deep drawing height (mm) 125
Bgsjamzp79
The machine is still in production but will be transported to our warehouse from next year. All offers are valid until the day of loading.
Control system Siemens S5 and Mitsubishi for servo
Extras:
- Servo chain transport
- Transmission in 2007
- ILLIG VHW 72 pre-heating
- ILLIG RS 75b ...
Sectional refurbished in 2012
Bcbgf2d0dh
forming area 750 x 540 mm
max. material width 800 mm
depth of draw 150 mm positive/negative
molds are not available
Manufacturer Illig
Model RDM 50K
Year 1994
Condition Used
Approx Hours 29,000
Max forming area 500 x 280 mm
Depth of draw 150 / 15 mm
Max material width 525 mm
Materials PP / PS
Max cycles / min 20
Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale
Bk9g03hngo
Maximum plate size 2060 x 1060 mm
Max thickness plate 10 mm
Manual board loading / unloading
Plate pressing frame stroke 650 mm
Pneumatic plate pressing frame actuation
Closing force of plate pressing frame 30 kN
Mold bearing table race 970 mm
Pneumatic mold holder table actuator
Closing force 24 kN
Cooling fans No. 4
top heater 52 kW
Ceramic resistors Nr. 80 each 650 W
Lower heater 32 kW
Ceramic resistors Nr. 80 each 400 W
Individual heater resistant control
Vacuum pump 100 m3 / h
Positive and...
VERY LOW PRICE!!!
Manufacturer TFT
Model FCS 780 IM
Year 1999
Condition Used
Stations In Mould Cutting and Stacking
Max Tool Size 780 x 570 mm
Hours approx. TBC
Bjhicvrezv
Depth of draw 130 / 130 mm
Max material width 810 mm
Max Sheet Thickness 1.8 mm
Max mould closing force 60,000 daN
Maximum cycles-minute 45
Forming pressure 7 bar
Notes
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
Forming Area:: 560x500mm
Film Width: 560mm
foil thickness: min 0,2mm - max.0.9mm
Depth of draw pos/neg: 140mm
Bk3pdqdiqc
Materials: PET, PVC, PP, PS, HIPS
Condition - in use, in production
Location: Bucharest, Romania, 050192
Other details:
- forming - cutting
- the documentation in original + scan pdf.
- we have the software saved
- working pressure: 6 bar
- voltage: 3x400V + N + PE, 50Hz
- cycle time: min 5, max 18/minut
- weight of the machine ca.: . 1,2 t
- space requirements of the ma...
Make: Lit Seng (Authorised Kiefel Mould Maker, Asia)
Year: March 2018
Product: PET Apple Punnet
Designed for: KMD78 (4-stations)
Usage: < 1million cycles (Almost new)
Output rate: Up to 20 cycles/minute
Cavities: 6
Form method: Pressure-forming with vacuum-assist
Features:
Punnet to hold up to 1KG of fruits
Has 4 ventilation holes at the bottom
Sharp definition thanks to pressure-formed
Has denesting lugs, suitable for auto-packing or hand-packing purpose
Bky37ocum7
All detail...
Make Illig
Model HSA 50d
Year 2003
Condition Used
Delivery Date Immediately
Approx Hours 16,600
Maximum forming area 500 x 300 mm
Minimum forming area 100 x 35 mm
Positive depth of draw 80 mm
Maximum material width 500 mm
N2qjp
Maximum cycle rate 20 / min
Total weight 3,800 kg
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale
VERY LOW PRICE!!!
Manufacturer TFT
Model FCS 870 IM
Year 2002
Condition Used
Stations In Mould Cutting and Stacking
Max Tool Size 870 x 650 mm
Hours approx. TBC
Depth of draw 130 / 130 mm
Max material width 900 mm
Max Sheet Thickness 1.8 mm
Max mould closing force 60,000 daN
Maximum cycles-minute 40
Forming pressure 7 bar
Notes
Bjhic9cknw
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale
Make Illig
Model RV 53
Year 2005
Delivery Date Immediately
Stations Forming, Cutting & Stacking
Maximum Forming Area 500 x 350 mm
Itgxsr2
Minimum Forming Area 300 x 100 mm
Height of Forming Above-Below Material 100 / 30 mm
Maximum Cycles-Minute 20
Total Width incl Control Cabinet 1930 mm
Total Length incl roll stand 6330 mm
Total Height 2050 mm
Total Weight 3000 kg
Notes
All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
With Chiller, 23 kW
Bumuayhx0
Pre-heater Kiefel KVH 83
ILLIG STAL 800 Trim Press
Forming area max. mm 680x500
Material width max. mm 720
Depth of draw neg. mm 120
Depth of draw pos. mm 120
index length max. mm 530
tool closing force kN 180
Equipment Available:
- Mould & Matic Thermorunner 4 (1998)
- Mould & Matic Pick Up Stacker (2014)
- 95mm Mould & Matic APET Mould (2008)
Make Mould & Matic (Kiefel)
Model TR 4 (Thermorunner 4)
Year 1998
Delivery Date Immediately
Max Mould Size 779 x 450 mm
Depth of Draw 115 mm
E2dfpk9fu
Max Material Width 560 mm
Max Material Thickness 2.5 mm
Max Cycles / Min 45
Punching Force 20,000 N
All details are subject to change and/or errors.
All equipment is subject to availability and/or prior sale.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.