Used Thermo Forming for sale (6,907)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Hjdpfoq A Um Rjx Ahasfh Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle. Hedpfx Ashbu E Hohaefh

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 Hfoden D Ew Iepfx Ahajh 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. Hodeq Nn Hcopfx Ahaefh The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m. Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Comes with tools of various sizes. Sold in the condition shown in the photo. Complete forming parts set €4000. See picture 2. Flender motor ZF48-M100LB4, €250, picture 3. Busch vacuum pump Wv1000B-001 KDFC, €1200, picture 4. Automatic double-line label printer and spreader, complete, €1500, picture 5. Rotary cutter for hard foil, €500, picture 6. Outfeed conveyor, €300, picture 8. Selling as a bundle for €2000, as is. Complete die set €2000. HMI and electronic components. Other parts. Hsdju Hz Tdepfx Ahaofh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Hfsdpfx Asx Uym Hshaeh Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Hfodpeunia Hefx Ahash

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Hfedpfjyzxgfsx Ahash Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: used, This listing is for Thermo Scientific Revco UXF300 UXF Freezer The unit is in full working condition and ready for immediate use This robust upright ultra-low temperature freezer provides 421 litres of capacity with an intuitive touchscreen control panel and high-performance cooling mode • Source Pedigree: Biotech / Research Facility Hfjdjxhd Hhspfx Ahaoh • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished

Year of construction: 2022, condition: used, This listing is for a 2022 Thermo Scientific CW3 Cell Washer (Serviced August 2025) The unit is in full working condition and ready for immediate use. This automated centrifuge system delivers reliable, reproducible blood cell washing. It features an intuitive digital display, custom pre-set cycles, and standard rotor compatibility for optimized laboratory workflows Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Hfedpfozbthiox Ahaoh • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](?srsltid=AfmBOoqR9FvD3vzpV-JO8iBilyVfeFnwQmkI6V46J74VJ3jWgm r396ss)] Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM Hfjdpou Nw Enefx Ahaeh The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT Hjdpfx Ahju Nw Hloaefh *

Condition: used, This listing is for the Thermo Scientific CW2 Sorvall Cell Washing Centrifuge. The unit is in full working condition and ready for immediate use. This premium cell washer streamlines blood bank procedures and simplifies cleaning protocols. It offers reliable, automated performance with an easy-to-use digital interface, making it perfect for demanding clinical and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Notice for Procurement: Hfodpfxsza Dtaj Ahajh This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, This listing is for Thermo Scientific Cytospin 4 Centrifuge. The unit is in full working condition and ready for immediate use. Power-On Verified The Thermo Scientific Cytospin 4 is a premier cell preparation centrifuge designed for thin-layer cell deposition. It utilizes centrifugal force to isolate and deposit cells onto microscope slides while maintaining cellular morphology. Features include a sleek design, simple touchscreen controls, and enhanced safety protocols. Transparency Report and Technical Audit: Hfsdpfxoza Dcbj Ahajh Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Integrity: 100% Original Parts (Non-Refurbished) • Condition: Direct-from-Bench (Decontaminated/Original)

Year of construction: 2023, condition: like new (used), functionality: fully functional, Thermo Fisher TSX70086V – Ultra-Low Temperature Freezers (-86°C) Like-new laboratory equipment – built in 2022 and 2023 – over 100 units available Over 100 high-quality TSX70086V ultra-low temperature freezers from Thermo Fisher Scientific are available for sale. These units are ideal for the safe and energy-efficient long-term storage of temperature-sensitive laboratory samples at temperatures down to -86°C. Some units are still in their original packaging, while others have seen very little use. Technical specifications: Temperature range: -50°C to -86°C Usable volume: 949 liters (33.5 cu. ft.), suitable for up to 700 standard 2-inch sample boxes Energy consumption: only 0.36 kWh/day/cu. ft. (ENERGY STAR certified) Noise level: less than 44 dB Years of manufacture: 2022 and 2023 Power supply: 230 V, 50/60 Hz, 1 phase Refrigerant: R290 / R170 (environmentally friendly) Dimensions (H x W x D): 1981 × 1148 × 960 mm Equipment: 3 height-adjustable stainless steel shelves, load capacity per shelf: 128 kg Special feature: All units have been converted by the manufacturer to the new 5-door interior layout. This significantly reduces cold loss when opening and increases energy efficiency and temperature stability during operation. This is a clear advantage over the conventional 3-door system. Price Overview: Hedswm Abqspfx Ahasfh Unit Price: €8,900 per unit 10 units or more: €6,900 per unit For comparison: The current new price according to Thermo Fisher is €25,711.92 per unit. Availability and Shipping: Sold ex works 42699 Freight charges are not included in the price and will be billed separately. Virtual or on-site viewings are available upon request. National and international shipping is available upon request. Technical data sheets and photos are available upon request.

Year of construction: 2015, operating hours: 44,309 h, condition: ready for operation (used), total width: 13,550 mm, total height: 7,510 mm, pressing force: 408 t, product length (max.): 18,000 mm, This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details. • Application: Door panel FAT/FOT (Left Hand / Right Hand) • Connected Load: 692 kW • Rated Current: 1000 A • Voltage: 400 V AC / 24 V DC • Frequency: 50 Hz • Operating Pressure (Pneumatic): 5–7 bar • Air Consumption: < 300 l per cycle • Pneumatic Connection: G 1/2 • Pneumatic Air Quality: Dried / Un-oiled • Ambient Temperature Range: 15–40 °C • Relative Humidity: 20–70% (non-condensing) • Noise Level: < 82 dB • Main components included: • HOP400 Press: 4000 kN press force; 2500 x 1800 mm press area; approx. 79,000 kg Hedpfx Ahey Rpk Hoaofh • HOP300 Calibration Press: 3000 kN press force; 2100 x 1300 mm press area; approx. 24,000 kg • Feeding Table: 2400 x 1800 x 1100 mm • Hydraulic units for form and calibration presses • Tool change systems (Left and Right)

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Euro 6 compliant Valid TÜV inspection until 09/2026 Thermo-King T-1000R Hfsdpfey Urcysx Ahaeh Tandem trailer, 18 tons, available at an extra cost Trailer: EUR 5,900 net Technically sound and ready for operation.

Condition: excellent (used), Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers and is designed for automated laboratory operations. This system is used for elemental analysis in laboratory settings. Sample introduction is managed via the installed autosamplers, allowing for continuous and automated operation. Equipment and Configuration - Thermo Fisher Scientific Flash 2000 - CHNS O Analyzer - 2 x AI AS 1310 Autosamplers - Front display with status indicators for operational states - Gas connections for He and O2 - RS232 interface and additional device interfaces - Connections for autosamplers and optional modules - Power supply: 230 V - Accessories and parts as shown in the images Technical Data Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Device type: Elemental analyzer Voltage: 230 V AC Frequency: 50/60 Hz Fuses: 2 x 6 A Power consumption: 1400 VA Autosamplers Model: AI AS 1310 Supply voltage: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions Main unit width: approx. 55 to 60 cm Depth: approx. 55 to 65 cm Height: approx. 50 to 60 cm Total width with 2 autosamplers: approx. 100 to 120 cm Weight Main unit: approx. 45 to 60 kg Each autosampler: approx. 8 to 12 kg Total: approx. 60 to 80 kg Condition Used, with age- and usage-related signs of wear. Condition as shown in the images. Scope of delivery - Flash 2000 Analyzer Hfodpfxjy D Sqve Ahaoh - 2 x Autosamplers - Accessories and cables as shown Notes - The table shown in the photos is not included in the sale - All information is taken from the nameplate or the device shown - Subject to errors and prior sale - We are happy to answer any questions you may have.

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Hjdpfjxukh Ejx Ahaofh Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1/12 Block The unit is in full working condition and is ready for immediate release Hfodpfx Ajy Iw D Njhaoh The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit The unit is in full working condition and is ready for immediate release. The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments Key Features Performance Maximum speed: ~13,300 rpm Maximum relative centrifugal force (RCF): up to 17,000 × g, suitable for typical microcentrifuge applications. Timer: 1 min to 99 min, plus HOLD mode for continuous run. Thermo Fisher Scientific Capacity & Rotors Standard capacity usually 24 × 1.5/2.0 mL microcentrifuge tubes. Multiple rotor options are available (e.g., dual-row for 0.5–2 mL tubes, hematocrit rotors, specialized sealed biocontainment rotors). Build & Usability Hjdpfjy Iw Dpox Ahaofh Benchtop design: compact and space-saving for routine lab benches. Ventilated (non-refrigerated): designed for ambient-temperature operation. Intuitive controls: easy-to-read display for speed/RCF and run time; settings can be adjusted during runs. Safety features: impact-resistant housing, secure lid lock (won’t start until closed and can only be opened once rotor stops), and an emergency manual release. Quiet operation: around 56 dB(A), relatively low noise for a microcentrifuge

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1 Includes 1 No 12 Block usually retailing around £60+ Hedpfoy Iw A Sox Ahajfh The unit is in full working condition and is ready for immediate release. The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Hodoxhfpwjpfx Ahaefh Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: new, Year of construction: 2025, color: white, New and unused 10-foot refrigerated container Thermoking Magnum Plus refrigeration unit Cools down to -40 °C Hfsdjy Ix D Djpfx Ahaeh Heats up to +30 °C = Further Information = General Information Year of manufacture: Apr. 2025 Model year: 2026 Dimensions Dimensions (L x W x H): 299 x 244 x 259 cm Weights Unladen weight: 2,360 kg Payload: 24,000 kg Gross vehicle weight: 26,358 kg Functional Cooling range: -40 °C to +30 °C Refrigeration engine: electric Condition General condition: very good Technical condition: very good Optical condition: very good Further Information Contact Arne Honingh for more information.

Condition: new, Year of construction: 2025, color: white, New and unused 10-foot refrigerated container Thermoking Magnum Plus refrigeration unit Cools down to -40 °C Heats up to +30 °C = Further Information = General Information Year of manufacture: Apr. 2025 Model year: 2026 Dimensions Dimensions (L x W x H): 299 x 244 x 259 cm Weights Unladen weight: 2,360 kg Payload: 24,000 kg Gross vehicle weight: 26,358 kg Functional Cooling range: -40 °C to +30 °C Refrigeration engine: electric Condition General condition: very good Technical condition: very good Hedpjy Ixwdofx Ahaefh Optical condition: very good Further Information Contact Arne Honingh for more information.