Used Mold Steels for sale (17,619)

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available 7 units Itjdpfxevax Ize Abgjf

Condition: excellent (used), Year of construction: 2004, Hotrunner external 3 zones/ possible 6 zones Itodpfx Abouykpuogof

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot Itsdpox Szwhjfx Abgof

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Itedexniklspfx Abgof

Condition: used, Used Netzsch model PMB VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Iedey Ddv Djpfx Abgjtf

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. Itsdpfx Aeymaxrebgsf For details about the refurbishment work, contact a member of our sales team.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Itjdpfx Ajy D Adtsbgef Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 600 mm, total height: 780 mm, total width: 1,600 mm, Work Table AT 1600 with Stainless Steel Top Iedpfxjyhy Nkj Abgjtf Premium gastronomic/bakery work table Stainless steel worktop with rear upstand (gallery) Lower storage shelf Approx. dimensions: 1600 x 600 x 780 mm (W x D x H) Used unit, cleaned Option: Delivery service New castors / wheels Come visit us!

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Itedpfxsy Dvgus Abgof Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch Iedpfx Absxabntjgetf - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Itodpfx Absy Dh Eiogef

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Iedpjxqhuuofx Abgjtf Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Isdpfx Abjvimd Nogotf Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Iedpfx Ajw Tt R Isbgjtf Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Itodpfex Rvciox Abgef Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Iedjyrd U Ujpfx Abgetf Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Itjdpfoyzumzox Abgjf Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Isdpfecud Nhsx Abgjtf Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Itsdpfx Ajlc R Rxobgef Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Isdpeub Umqsfx Abgotf Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, We are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trade. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a major dealer of used injection moulding machines for more than 25 years. Current note – Tax information and advantage for used machines: From 01.07.2025, used machines will also be eligible for special depreciation of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can apply the same depreciation rates as for a new machine. Key term: Growth booster, (§ 7 paragraph 2 EStG-E) Used injection moulding machine with 2 additional available injection units (25 and 35 mm) – 50 mm injection unit currently installed. See document for download. Manufacturer: Arburg Iedpfxsw Rm Hde Abgotf Type: 470C 1500-350 Year of manufacture: 11/2004 Machine number: 196184 Control system: Selogica Operating hours: 30,665 h Regular maintenance by the manufacturer Clamping unit: - Clamping force: 1500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight: 750 mm Injection unit 50 mm (highly wear-resistant): - Shot volume: 392 cm³ - Shot weight: 359 g - Screw diameter: 50 mm - Injection pressure: 1670 bar Extras: - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt in machine bed - Handling interface - Selector unit - 2 x air blow-off - Accumulator for fast injection - Electrical interface for pneumatic shut-off nozzle - Technology level 2 servo-regulated pumps - 9 electrically regulated heating zones - Interface for WKT temperature control device - Coloring device interface - Equipment package - Extended monitoring, advanced movement functions, production control, optimization/operator aids, quality assurance, and documentation Visible peripherals not explicitly named are not included in delivery. - Available immediately from our Hanover warehouse, free loaded or delivery on request for a freight charge - Function tested (guaranteed function up to first commissioning)

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) Ijdpfx Ajm Nclvobgjtf - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Iedpfxjubamve Abgotf Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g Itsdpfxoyc Ewxj Abgof - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ijdpfsyf Uy Ujx Abgotf Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse