Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Clamping force 60 to Screw diameter 50 mm Control Unilog 4000 Tie bar distance 320 x 320 mm Core pulling Data collection Terminal Msifww more
4
warehouse no.: 502411 manufacturer: BATTENFELD Typ: Plus 350-75 Bcb8pc8kux Controller Unit: Unilog B2 year of construction: 2007 operating hours: 39600 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: two tie bars clamping force: 350 kN distance between tie bars h: 270 mm size of mould plates h: 470 mm size of mould plates v: 280 mm min. mould height: 150 mm max. mould height: 250 mm max. open daylight:... more
1

Injection molding machine Arburg 270 M 500-210

More Arburg 270 M
Eutighofer Straße 144a, 73525 Schwäbisch Gmünd, DEGermany
6698 km
1990
good (used)
Injection moulding machine ARBURG 270 M 500-210 year 1990 • ARBURG 270M 500-210 Bbxp2nis78 • Tie bar distance: 270x270mm • Clamping force: 500KN • Screw diameter: 30 mm • Injection weight: 70 cm³ • Sorting door: No • Euro interface: No • Hydraulic core: Yes more
1
DR.BOY 22 S DIPRONIC (S&P 3449) 22 S DIPRONIC (220 H-52) force tons: 22 shot ccm: 20 year: 1987 price: 3.500 € C220ak9i contact: Herr Ralf Schulz more
8
Sandretto Serie Otto 430/ 110 Plastic Injection Moulding Machine. with Piovan S33 Hopper Loader and Piovan T201X Hopper. Brpz0das more
6
screw diameter: 28 mm injection shot weight in Polysterol: 0 g/PS closing pressure: 0 kN lockforce: 22 t moulding weight: 40 g/PS daylight between columns: 258 mm cylinder head volume max.: 49 ccm injection pressure: 930 bar tank: 125 l total power requirement: 8,5 kW weight of the machine ca.: 0,7 t space requirements of the machine approx.: L:2,3xB:0,75xH:3,4 m Documents available electr.: 50 Hz , 220V/35A; 380V/25A , 140 bar Yta0af30 applicable for proceeding & injection of rubber it's usab... more
4
Clamping force of 25 to Screw diameter 22 mm Control Unilog 2040 Tie bar distance 250 x 250 mm Data collection Terminal -Parts Extractor Fabr. ACE Qkwlqfhyl Temperature control unit serial. Single more
5
warehouse no.: 502568 manufacturer: BATTENFELD Typ: Plus 350-75 Controller Unit: Unilog 1020 year of construction: 1999 operating hours: 33803 h The injection molding machine manufacturer Battenfeld has been developed the series PLUS that is a small and compact injection molding series. These PLUS series are still very robust. This machine, which is named PLUS 350-75 is very space-saving. The closing unit has two bars and a fully hydraulic clamping unit. The operator terminal is int... more
1

Injection moulding machine ARBURG 270 C-500-100 Arburg

Eutighofer Straße 144a, 73525 Schwäbisch Gmünd, DEGermany
6698 km
1992
good (used)
Injection moulding machine ARBURG 270 C-500-100 year 1992 • ARBURG 270C 500-100 • Tie bar distance: 270x270mm • Clamping force: 500KN • Screw diameter: 25 mm Bbxp3ak8ga • Injection weight: 49 cm³ • Sorting door: No • Euro interface: No • Core pull: No more
1
DR. BOY 25M PROCAN (S&P 3454) DR. BOY 25M PROCAN (no 67420/ 28.513 h) Force tons: 25 shot ccm: 30 year: 1995 Ibjzelh price: 5.900 € contact: Herr Ralf Schulz more


Clamping f...
daily

New machines via email!

Stay updated!
6
Spritzgiessautomat ARBURG 170 CMD 150-45 U Built in 1995 Clamping force of 150 kN Heating power 2.5 KW Pump output 5,5 KW GES. Power 8 KW Operating voltage 380 V 50 Hz Ei8ue8 Condition very good more
6

Injection Moulding Machine Arburg 270S 500-60

Trippstadter Str. 110, 67663 Kaiserslautern, AlemaniaGermany
6535 km
2000
good (used)
OVERVIEW: Bahuseiohz Brand: Arburg Model: 270S 500-60 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 2000 Production hours: 66332 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 3500 mm Measurements depth: 1115 mm Measurements height: 2000 mm Machine weight: 1900 kg Automatic cycles: 9745141 Type of drive: Hydraulic Closure: Hydraulic CONTROL UNIT: Brand: Arburg INJE... more
5

Injection molding machine Krauss Maffei KM 90-340 B

Wiefelstede, GermanyGermany dealership location
6385 km
1989
used
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Clamping force 90 to Dyfaydl Control MicroControl MC 3 Gap mm 610 plate size 525/570 Machine weight 4.4 to more
4

Injection molding machine BOY 22 S Dipronic

41189 Mönchengladbach, DeutschlandGermany
6370 km
1990
ready for operation (used)
BOY 22s Dipronic Clamping force (kN): 220 Screw diameter (mm): 18/22/24/28/32 Maximum injection volume (CC): 16/24/29/39/64 Guqdrzshm Maximum injection weight in PS (g): 18/27/32/44/57 Spec. injection pressure (bar): 2587/1732/1455/1069/818 Minimum plate distance (mm): 200 Clear width between tie bars (mm): 254 Max plate distance (mm): 500-400 more

ENGEL ES 200 H/50 V SO/TR ENGEL 50 Ton.

VIA ANTONIO GRAMSCI 48, 13875 PONDERANO, ITItaly
6746 km
2000
good condition (used)
ENGEL ES 200 H/50 V SO/TR Construction year 2000 Bbsas7i9v2 50 Ton. Screws diam. 30 mm. Injected volume 99 cm3 Euromap 200/50 Moving plane stroke 300 4 air spray Machine certified for good conditions Can be seen running with Client’s mould, previous appointment more
1

injection moulding machine Dr. Boy Boy 22 D

Langenfeld, GermanyGermany dealership location
6407 km
2006
used
warehouse no.: 502438 manufacturer: Dr. Boy Typ: Boy 22 D Controller Unit: dipronic year of construction: 2006 This Dr. Boy Boy 22 D injection molding machine has a hydraulic clamping unit which has a max. clamping force of 220 kN (22 Ton). The hydraulic ejector has a stroke limiter at a stroke of 80 mm. The injection unit has an increased wear resistance. Furthermore, the machine has a monitoring switch for oil level and oil temperature. The material funnel is included in the delivery. One of ... more
3
8.5 motor kW, Heating capacity 3.8 kW, pressure up to 160 bar, machine weight 2,11 t Note: the machine has been used for silicone processing Fo78w2zfu more
5

Injection molding machine Arburg 221E 221P

Schwäbisch Gmünd , GermanyGermany dealership location
6698 km
1977
used
Good condition variable can be used by. Injection moulds (do not belong to the scope of delivery) Functioning, voltage 380V. Aufspannmasse Max approx. width 220mm x height 310mm x clamping depth 310 mm. Closing force 340kN, injection force around 120kN, heating 5, 5kW. Further technical data see nameplate on the images. The storage facility is in 41460 Neuss. Love to see below for more information. A manipulator for degating, separate cooling unit and conveyor belt can be bought extra. T... more
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Clamping force 50 to Gap mm 375 37zbvoln Plate size 375/430 mm Machine weight 3 to more
2

Injection moulding machine BMB MC 200

Piazzetta Schiatti n. 8, 44121 Ferrara, ITItaly
7030 km
1999
good (used)
BMB MC 200 injection moulding machine Gdoinhhx0 year 1999 Ton. 200 Passage 520 x 480 columns Maximum opening 480 Max travel 550 Min. Mould thickness 200 Centering ring diam. 120 Screw diam. 55 Printed to Ps.1.05 gr. 480 Visible working more
5
To sell an injection molding machine Toshiba. The feed screw is broken, everything else is ok. The machine is still under power and can be tested. Location space CH-9000 St. Gallen. Price: from site. Gvjsjc more
4

injection moulding machine Dr. Boy Boy 22 D

Langenfeld, GermanyGermany dealership location
6407 km
2004
used
warehouse no.: 502437 manufacturer: Dr. Boy Typ: Boy 22 D Controller Unit: dipronic year of construction: 2004 This Dr. Boy Boy 22 D injection molding machine has a hydraulic clamping unit which has a max. clamping force of 220 kN (22 Ton). The hydraulic ejector has a stroke limiter at a stroke of 80 mm. The injection unit has an increased wear resistance. Furthermore, the machine has a monitoring switch for oil level and oil temperature. The material funnel is included in the delivery. One of ... more
4
Motor output 5.5 kW, Heating power 3.2 kW, Pressure 140 bar, Machine weight: 700 kg Baybu9n3nw more
6

injection molding machine Engel ES 240/65 ST

Schwäbisch Gmünd , GermanyGermany dealership location
6698 km
1984
used
ENGEL injection moulding machine's 240/65 ST Mbsqr Year of construction: 1984 23,000 hours of operation, used only as a second machine Machine weight 3,500 kg / gross length 3900 mm width 1400 mm height 1800 mm screw diameter 30 mm maximum shot weight 103 g injection pressure 2150 bar clamping force 650 kN max height 380 mm operating hours 23449 more
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Clamping force 60 to Control Unilog 4000 Tie bar distance 490 x 490 mm Core pulling Hivbtnp9o Data collection Terminal Weight 4 to more
6
For sale a Wittmann is Battenfeld injection moulding machine MicroPower 15/10 year 2017. The machine no longer stands on the river. Hours of operation: approx. 3,000 Number of shots: approx. 36,000 Technical data injection unit Screw diameter: 14 mm Injection piston diameter: 8 mm Screw L/D ratio: 20 Specific injection pressure: 2,500 bar Computed displacements: 4 cm3 Injection weight (PS): 3.6 g Technical data clamping unit: D9orv7 Clamping force: 150 kN ... more
6
Krauss Maffei Injection Moulding Machine, previously used for CD and DVD production various models Krauss Maffei 80 - 190 Krauss Maffei 50 - 190 P7yjmqu09 Years 1997 - 2003 several machines available more
1
Battenfeld BA 230V/50V-R Year: 1993 Control unit: Unilog 4000 B Injection Unit: .../50V-R Screw diameter: 25 mm Injection pressure: 2149 bar Mzr3pa8 Injection volume: 58,9 ccm Shot capacity: 53,6 g Clamping Unit: BA 230V/... Clamping force: 23 t Platen size: 482 x 500 mm Distance between tie bars: 304 x 254 mm Mould height: 150 mm Opening storke: 325 mm Max.Daylight: 475 mm Ejector stroke: 100 mm Delivery time: at short notice Machine dimensions(m) LxWxH: 2,6 x 1,5 x 3,8 m We... more
3

Boy 22 S Dip Boy Boy 22 s Dip

Neustadt/Wied, GermanyGermany dealership location
6459 km
1992
used
6 Monate Teilegarantie Generalueberholt Boy 22 S Dip H2kacs2 Plastifiziereinheit 24 offene Duese Auswerfer 80 mm Wasserverteiler 4 fach 220 KN 400v 50 Hz " Bilder zum Vergleich" more
1
Screw Dia: 14 mm B3rnem2 Swept Volume: 14 ccm Shot Weight: 12 g Injection Pressure: 2400 bar Clamping Force: 250 kN Tie Bar Distance: 280x280 mm Platen Size: 410x410 mm Mould height min.: 160 mm Opening Stroke: 315 mm Total day-light max: 475 mm more
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Qkzt0ay2j Closing force 2500 kN Opening force 160 kN -lichter tie bar distance of 630 x 560 mm Control MicroControl MC 3 Gap mm 820 plate size 900 x 830 machine weight 12,5 t more
3

Boy 22 D Boy 22 D

Neustadt/Wied, GermanyGermany dealership location
6459 km
1995
used
6 Monate Teilegarantie Generalueberholt Boy 22 S Dip Plastifiziereinheit 28 offene Duese Auswerfer 80 mm Ydp8utolb Wasserverteiler 4 fach 220 KN 400v 50 Hz " Bilder zum Vergleich" more
3
Aus laufende Produktion / Medizintechnik 3 Monate Teilegarantie Funktionsgarantie Boy 22 S Dip Plastifiziereinheit 24 mm Nadelverschlussduese R 35 Wasserverteiler 4 fach Ausblasvorrichtung Ausschraubvorrichtung 1 Drehrichtung mit Zwischenstop Materialtrichter Lichte Weite zw d Holmen 254mm Schliesskraft 220 KN Mcdvj 400v 50 Hz " Bilder zum Vergleich" more
3

Boy 22 S VV Dip Boy 22 S VV Dip

Neustadt/Wied, GermanyGermany dealership location
6459 km
1992
used
6 Monate Teilegarantie Generalueberholt Boy 22 S VV Dip Hykukkr plastifiziereinheit 24 offene Duese Auswerfer 80 mm Wasserverteiler 4 fach 220 KN 400v 50 Hz more
4

Boy 25 M Procan Boy 25 M Procan

Neustadt/Wied, GermanyGermany dealership location
6459 km
1996
used
6 Monate Teilegarantie Generalueberholt Boy 25 M Procan Control Plastifiziereinheit 24 HV offene Duese Auswerfer 80 mm Wasserverteiler 4 fach Dekompression Lichte weite zw.d.Holmen 254mm x 254mm 250 KN 72vu97sxa 400v 50 Hz " Bilder zum Vergleich" more


Clamping f...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close