Blow moulding for sale
Identified location: Ashburn (US) (Edit)
5
• velocità: 20.000 bph
• Year: 2010
• Model: SR 12.
• Bottle format: 2.0 Lt.
• Machine manuals: Yes.
Ndevcq9n
• Number cavities: 12.
• Preform loader.
• Preform tipper.
• Preform orientator.
• Chiller.
• Neck preform: 25.8 m.
• Air recovery system.
• Safety protections.
• CODE: W 13 more
3
Plasticizing screw Ø 45 50 55
Injection volume CC 220-270-330
Plasticizing capacity kg/h 60 75 90
Pressure on material kg / cm² 1,500 1,250 1,000
Variable screw speed n. 50 / 250
Clamping force of blowing mould KN 59
Clamping force of injection mould KN 245
Heating capacity kW 9
Pump motor HP 25 kW 19
OVERALL DIMENSION:
Length mt 4.2
Width mt 1.6
Height mt 1.9
Net weight approx. 5,200 kg
39k0fttyf more
9
2006
reconditioned (used)
Linear blow moulding machine SB 3000E5.
The price of the machine, without additional equipment and forms – 55.000 EURO/ Net
Pt0rey
New modular heating system:
Based on closed , modular heating panels.Its special design gives a much higher efficiency heating needed for proper heating of preform.
Delivery time - 30 days from order
SERVICE:
Installation and commissioning according to the applicable rates of the Dynaplast website
Warranty
6 months from the launch more
5
Container Size With Actual Configuration: 30 l
Number Of Heads: 1
Material Type:PE
Container Size (Max): 30 l
Number Of Stations: 1
Output Capacity U/H Or Kg/H:Kg/h 150
Extruder Type:Continuous
Number Of Extruders: 1
Screw Diameter: 80 mm
L/D: 20
Other Specifications:
Extrusion blow molding Battenfeld-Fischer VK 1/30
Year 1994
Extruder screw 80/20d
Extruder motor changed in 2013: synchronous motor with dimmer
Power 55 kW
Clamping force 300 kN
Neu9t
Dry cycle 5 s
Opening stroke: 360 mm... more
13
1977
good (used)
Year of construction: 1977
Refurbished in 1995, until a year ago in use
Type: KEB 3/2 S80/10
Bdtn07ntzu
Snail: 80s snail armored head: easy 2 stitch 100 head
Blowing capacity: up to 1,000 mm
most recently produced 850 ml bottles
Mass engine: 3,600 x 2,700 x 2300 mm control cabinet: 1.100 x 550 x 2,000 mm
Tool size width 295 x height 300 x depth maximum 2 x 100 min 2 x 75
The machine is sold because of relocation. It is fully functional and has been hydraulic pump Rexroth maintained c... more
1
Platen size: 110x900mm, opening stroke: 620-1400mm, clamping force: 30t, hydraulic power: 15kW, control: Siemens S5-PC, operational hours: 55000h.
9ttvcetni more
4
Plasticizing screw: Ø 100
Injection volume: 2500 cm³
Plasticizing capacity: kg/h 270
On the material pressure: kg / cm² 850
Variable screw speed: n. 50 / 120
Clamping force of blowing mould: 167 KN
Clamping force of injection mould: 980 KN
Heating capacity: 28 kW
Pump motor: HP 50 kW 37
OVERALL DIMENSION:
Length mt 7
2.9 mt width
Height mt 2.5
Net weight approx. 16,000 kg
Ccrxn7p more
4
2006
reconditioned (used)
Linear blow moulding machine SB 8000, serial no 8015,
The price of the machine, without additional equipment and forms - 74.000 EURO/ Net price is negotiable.
Year of prod machinery: 2006
with nominal output 7200 bph (about 6000 bph at 2,0l bottle),Machine after general overhaul, in a very good condition
Ctd9lhx7
Including:
Preform feeder, ease and fast change mould system, electrical stretching system, mechanical crane system, powered by electric motors for closing system with pressure compens... more
4
BLOW MOULDING BATTENFELD FISHER 5L
S3nrx9
VK 1-5 n 4509
Year : 1991
Extruder screw 60 / 20d
For article 0,5 - 5 Litre
Nombre of extruder: 2
Nombre of stations : 1 more
2
12
2003
good (used)
Description
Brand SIPA
Model SF8 3
ID 870
Status Price reduced
Price 39.000 € + VAT
Year of manufacture 2003
Fuel Electric
Working hours 45.746 ore
Location București / Bucharest (RO)
Previous price: 40 000 Euro.
Container size (max.): 7 l
Output: 2000 U/h
Preform feed system:Yes 3
Neck: 48
Number of cavities: 3
Materials:PET
Heating zones: 8
Linear Blow molder Sipa SF 8/3
Basic machine refurbished in 2008
- Soundproof and safety cabin
- Bottle discharging connection to the line on table-top... more
1
Platen size: 1800x1500mm, opening stroke: 3000mm, clamping force: 180t, hydraulic power: 110kW, control: S115U-S115F, operational hours: 38000h.
3m7vzdp2 more
11
Linear blow moulding machine SB 3000E, 2-cavity with a capacity of 3000 b/h
Including:
New modular heating system, preform feeder, ease and fast change mould system, electrical stretching system, touch screen panel, flowing adjustment of capacity in the range of 1000-3000, elimination function of cracked bottles.
The price of the machine with a set of Boge compressors, without additional equipment and forms – 88.000 EURO/ Net price is negotiable.
Year of prod machinery 2019
Standard of executi... more
1
Platen size: 500x710mm, opening stroke: 1100mm, clamping force: 25t, hydraulic power: 15kW, control: Siemens S5-PC, operational hours: 3000h.
Wnc3c more
1
Platen size: 800x600mm, opening stroke: 320-1100mm, clamping force: 30t, hydraulic power: 15kW, control: Siemens S5-PC, operational hours: 55000h.
9z77htwx7 more
1
Platen size: 800x600mm, opening stroke: 320-1100mm, clamping force: 30t, hydraulic power: 15kW, control: Siemens S5-PC, operational hours: 27000h.
Eq0hiszd3 more
6
Output: 280kg/h, clamping force: 400kN, installation height: 500mm, opening stroke: 900mm, dimensions clamping plates: 700x830mm, drive power: 129kW, heat output: 43.1kW, connected load: 172.1kW, operational hours: 70000h.
Ssojrg more
15
I will SELL a production line for the production of EPS polystyrene (EPS Polystyrene Production Line)
Possibility of transport and / or connection of machines by our technicians.
AUTOMATIC POLYSTYRENE EPS PRODUCTION LINE
TECNODINAMICA / HIRSCH / POLIMEC / DAL ZILIO MECCANICA
The production line includes:
--PRE-EXPANDERS--
1. BATCH PRE-EXPANDERS
BATCH PRE-EXPANDERS (discontinuous) TECNODINAMICA mod. TV925, made of stainless steel INOX + dryer + injector + automatic dense control system, contro... more
6
2019
new
(INCLUDES FIRST SET OF ABRASIVE BRUSHES)
For video and more info see - unosand.com/mouldingsander.html
The Unosand Moulding Sander is ideal for sanding and denibbing all profiles including - architrave, skirting and flooring products for medium to large scale production.
A heavy duty steel frame supports five variable speed motors for sanding mouldings and other linear products on three sides.
The variable speed rollers feed the product past two counter rotating brushes from top and two side... more
4
spindle moulder with tillable spindle
guaranteed quality at your finger tips - easy-to-use
the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine.
spindle speed readout via LED's
left right turning of spindle
spindle moulder fence with manual adjustment
machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button
carriage on work table for tenoning wo... more
5
2007
ready for operation (used)
General Data
Measurements width 5070 mm
Measurements depth 1400 mm
Measurements height 1945 mm
Injection Unit
Stroke volume 220
Injection pressure 1700 bar
Clamping Unit
Clamping force 1250 kN
Opening stroke 410 mm
Distance between bars 450 mm x 400 mm
Mould height min 150 mm
Mould height max 500 mm
Additional Equipment
Euromap automatic table height adjustment
Z7srsvct
General Data
Measurements width 5070 mm
Measurements depth 1400 mm
Measurements height 1945 mm
Injection Unit
Stroke volum... more
diameter range 6 mm
Bivvjnuavi
number of dies 2
number of stations (incl. cut off) 3
cutting length 70 mm
shaft length under head 50 mm
output - pieces/min 280
press power 30 to more
0
MOULD CLAMPING UNIT
.. locking force: 110 to
.. die opening stroke max.: 350 mm
.. mould height min.: 250 mm
.. max. distance between tool-plates: 600 mm
INJECTION UNIT
.. Diameter of screw: 40 mm
.. Injection pressure: 2100 bar
.. Shot volume: 250 cm³
ELECTRICAL SPECIFICATIONS
Pt8vcu
.. mains voltage: 400 V
.. mains frequency: 50 Hz more
8
Control system: Dialogic
Switch-on hours: 58337
B9f3kb2q
Operating hours: 52223
Clamping force: 2000 kN
Material volume: 427 cm3
Plate size: 520 mm x 520 mm
Opening stroke: 900 mm
Screw diameter: 50 mm
Injection pressure: 2050 bar
Max. Capacity: 353 cm3
Machine weight: 7050 kg more
6
Ref. no. :16703
Producer :16703
Type: IntElect 80-370-100 NC4
Year: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 40 cm³
Shot weight: 36 g
Bhkkxnt9ux
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,5 x 1,3 x 2 m
Machine weight: 4750 kg more
3
1992
ready for operation (used)
Injection Unit
Injection pressure 1421 bar
Clamping Unit
Clamping force 5000 kN
2ro7me
Mould height min 375 mm
Mould height max 850 mm
This Battenfeld BK-T 5000-4000 Injection Moulding Machine was made in the year 1992. This machine can work with a clamping force of 5000 kN, and an injection capacity of 1421 bar. This Battenfeld stands out for the size of its mold platens, of about 815 x 815 mm.
Application Types
Injection Moulding more
1
bushing cut-off
diameter range 8,5 mm
number of dies 2
number of stations (incl. cut off) 3
cutting length 100 mm
shaft length under head 80 mm
output - pieces/min 300
press power 30 t
Wprz8c8 more
1
Blow film line for barrier foil
N0btd
Number of layer = 5,
Film width max. = 2200 mm,
Film thickness = 0,010 -0,250 mm,
Die = 400/ 4500 -5-ZIK-P2
Haul- off speed = 120 m/min,
Winder Tandem Filmatec max Diameter 1000 mm more
6
Injection moulding machine
ENGEL ES 750/175 HL
Control system: ENGEL CC100
Hours in operation: 58604 h
Clamping force: 175 Ton
Opening Stroke: 700 mm
Mould height: 250 / 700 min/mm
Size of mould plates: 820 x 750 mm
Screw diameter: 50 mm
Injection volume: 318 cm³
Bdt8tca372
Shot capacity: 287 g
Injection pressure: 2360 bar
Machine dimensions:
1680 x 5650 x 2180 mm
Weight: 11500 kg
Robot interface
With robot more
5
used
Chocolate molding machine, chocolate molding machine,
-Pralinenformmaschine
-stable execution
- conveyor belt length mm
- conveyor belt width 110 mm
- 2x press rolls O 145 mm
Rlt00ry
-1x molded body with ejection
-2x machines available
-1x machine with ball shape approx. 25 mm
-1x machine with shape ellipse approx. 20 x 35 mm
-Price pieces
-Transport dimensions 1540/520 / H1420 mm
-Weight 280 kg more
3
2012
ready for operation (used)
Control Unit
Brand Netstal
Release Graphtrack/DSP
Main Drive
Distance between bars 560 x 560 mm
Bewafdijr0
Clamping Unit
Clamping force 2000 kN
Opening stroke 510 mm
Distance between bars 560 x 560 mm
Mould height max 510 - 800 mm
Media
Main electronic connection 400 V / 50 Hz
Power consumption 55 kW
Additional Equipment
Complete audited
Wear parts replaced
Mechanical parts refurbished/replaced
Machine operational with 6 months of warranty
This Netstal PET-LINE 2000-3700E Injection Mould... more
1
bushing cut-off
diameter range 8,5 mm
number of dies 2
number of stations (incl. cut off) 3
cutting length 100 mm
shaft length under head 80 mm
Fb8qclx
output - pieces/min 300
press power 30 t more
11
Grubelnik winding and long moulding machines for pretzel and more
Dwklilmy3
* Used, working
* Type: Rollo 2000
* Max. 2500 pieces per hour
* Incl. conveyor belt table more
4
Ref. no. :16378
Producer :16378
Type: IntElect 80-370-100 NC4
Year: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Mould height max.: 510 mm
Injection unit
Screw diameter: 22 mm
Bgop7zsytw
Injection volume: 40 cm³
Shot weight: 36 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,5 x 1,3 x 2,0 m
Machine weight: 4750 kg more
10
Dough dividing and moulding machine Beher size 3
- Semi-automatic machine 30-piece
- Dough insert up to 2550g, pieces from 35 to 85 g
- Incl. effect plate
- Weight 450 kg
- Connection 400V, 16A-CEE plug
Q2sdl3fp
- checked and cleaned
- dispatch possible
- You are welcome to try out the machine at our premises
- price quotation excl. tax more
3
1992
ready for operation (used)
Injection Unit
Injection pressure 1781 bar
Clamping Unit
Clamping force 6500 kN
Mould height min 500 mm
Mould height max 900 mm
This Battenfeld BA-T 6500/6300 Injection Moulding Machine was manufactured in the year 1992. This powerful machine can work with a clamping force of 6500 kN and an injection capacity of 3309 g.
Application Types
Cxoliaf
Injection Moulding more
bushing cut-off
diameter range 4-10 mm
number of dies 2
number of stations 4
Bivvjxfgjj
shaft length under head 65 mm
cutting length 76 mm
output - pieces/min 150 more
Measurements Machine: 500x200x210
Hours: 98.627 hours
Clamping force: 100t
HR 20 zones
Bizsc793ya more
7
planning width 510 mm, planning height 120 mm, opening height 200 mm, 4 powered feed rollers, planer spindle 5,5 kW, thickness spindle 7,5 kW, left and right vertical spindle á 4 kW, feed drive stepless variable, electric switch board 1000 x 800 x 400 mm
C2zn823a more
7
1994
good (used)
Demag Ergotech 1000 / 430 Compact
Details
Manufacturer:
Demag
Type of machine:
Ergotech 1000 / 430 Compact
Year:
1995
Delivery time:
now
Terms of Delivery:
EX - Works
Porta Westfalica
Controlversion:
NC IV
Nz0ix
Screen text:
German
Operating hours:
78.500 hrs.
Price:
on request
Technical details
Clamping unit
Clamping force:
1.000 kN
Size of mould platens (h x v):
580 mm x 590 mm
Distance between tie bars (h x v):
400 mm x 400 mm
Mould opening stroke:
500 mm
Mould height min./ max:
250 / -- mm
... more
9
Ref. no. :16377
Producer :16377
Type: IntElect 80-370-100 NC4
Year: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Mould height max.: 510 mm
Injection unit
Bfnknna7n2
Screw diameter: 22 mm
Injection volume: 40 cm³
Shot weight: 36 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,5 x 1,3 x 2,0 m
Machine weight: 4750 kg more
6
2014
ready for operation (used)
Control Unit
Brand ENGEL
Model CC200
Interface Windows style display with 15 inch TFT-color Touch Screen
CNC main language ENGLISH/ SPANISH
Clamping Unit
Clamping force 300 kN
This ENGEL Victory 200/30 Tech US Injection Moulding Machine was built in Austria in 2014. It has been operative for 924 hours since then. This machine stands out for its unique tie-bar-less technology raises the efficiency and cost-effectiveness. It also has a maximum flexibility of mould dimensions. This allows for rel... more
bushing cut-off
diameter range 8-16 mm
number of dies 2
number of stations (incl. cut off) 4
Bexnbi0ren
cutting length 160 mm
shaft length under head 130 mm
output - pieces/min 100 more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
Sample sales contract for used machines in nine languages
Sponsorship of Michael van Gerwen and TV advertising
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
