Used Injection Blowing Machine for sale (64,354)

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition Bsdpfx Afskucxljpewh

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements Bwodpfsycqc Tjx Afpoh 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Bwedpfx Afoyf Hfpepeh Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Year of construction: 2016, condition: ready for operation (used), overall weight: 9,500 kg, General Data Machine weight 9500 kg Bwodpfxex D Hp Rs Afpoh This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Bwjdpfox Szwhjx Afpoh Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Bjdpfsyfphajx Afpjwh

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Bwedpfx Aevu Dncsfpsh Pump motor 18.50 KW Weight 7,400 KG

Condition: good (used), Year of construction: 2007, operating hours: 47,792 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm centering diameter of fixed platen: 125 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A Bsdpfx Aoygv S Iefpjwh mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech Bjdpfx Asygv Szefpowh controller: CC 100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included: screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Bsdsygv Sbopfx Afpewh Schuko-socket 10A mould heating 4x measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, warehouse no.: 503576 manufacturer: ARBURG type: Allrounder 900 T 800-150 controller: year of construction: 2010 operation hours: 72154 h clamping force: 800 kN distance between tie-bars h x v: 900 x 900 mm min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german air valve 1x machine with rotary index table machine incl. water flow regulator Anti vibration mounts Bwedpfx Afeygv R Ropjh Operation Data Acquisition measures of machine l x w x h: 3.8m x 1.85m x 2.15m total weight: 5000KG

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm Bwjdpfx Afjygv Ntjpjh max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: good (used), Year of construction: 2008, operating hours: 49,673 h, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, displacement volume: 154 cm³, injection pressure: 2.429 bar, ejector force: 22,000 N, ejector stroke: 100 mm, plate length: 740 mm, plate width: 640 mm, installation height: 300 mm, total length: 5,350 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 6,500 kg, type of input current: three-phase, input frequency: 50 Hz, clear span: 790 mm, Equipment: documentation/manual, warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar equipment included screen text german CEE-socket 16A Bodpfx Afsygv I Nepjwh air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Bwsdpfx Afeyglw Tepjh Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: good (used), Year of construction: 2011, clamping force: 650 kN, screw diameter: 22 mm, displacement volume: 42 cm³, injection pressure: 2,864 bar, BATTENFELD HM 65-130 Stock no.: 503671 Manufacturer: BATTENFELD Model: HM 65-130 Control unit: UNILOG B6 Year of manufacture: 2011 Technical Data – Clamping Unit Clamping force: 650 kN Tie bar spacing (H x V): 370 x 320 mm Platen size (H x V): 550 x 500 mm Min. mold height: 225 mm Max. mold height: 675 mm Max. platen daylight: 675 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 26 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mold weight: 600 kg Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 41.8 ccm Injection pressure: 2,864 bar Screw L/D ratio: 20 l/d Screw stroke: 110 mm Screw speed: 398 rpm Screw torque: 238 N·m Free-flow shot weight (PS): 61 g/s Number of heating zones: 4 Nozzle stroke: 47 mm Dimensions & Weight Machine dimensions (L x W x H): 3.5 m x 1.4 m x 2 m Total weight: 3,000 kg Equipment Control panel language: German Hydraulic core pull: 2x Air valve: 1x Bjdpfx Afsyglwmspswh Leveling elements Ethernet interface EUROMAP 13 interface Interface for temperature control unit Tool heating circuits: 6x

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Bwodsyglvpjpfx Afpjh Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Mould approach control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Min. mould height: 330 mm Max. opening: 1150 mm Bwedpfxsxqhuus Afpsh Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Bsdpfx Ajyguk Ajfpewh Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Bedpfx Ajyguhhjfpswh Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Bwedpjygikwofx Afpoh Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Bwjdpfxjygidwe Afpoh Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Bedpfsygib Njx Afpswh Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Bwsdpfx Aeygiafofpjh Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Bwjdpjygh Rvjfx Afpsh Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: used, Year of construction: 2017, clamping force: 250 kN, displacement volume: 570 cm³, injection pressure: 2,470 bar, overall weight: 14,500 kg, load hours: 22,900 h, screw conveyor diameter: 55 mm, terms of delivery: FCA Pegnitz delivery time: on request Bodpfxoxv D Tkj Afpswh terms of payment: 100% prior to delivery