Used Blister Machine For Pharmacies for sale (84,004)

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Ljdpfxsv S Eurs Agzeak Sold as seen

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Lasdpepfcd Ajfx Agzek Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Condition: good (used), Production: alloyed Tip: 4 sec Laodouhn Dcjpfx Agzek Turntable

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm Lodpjtndpzofx Agzoak - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 165 mm, roll diameter: 700 mm, Packaging line, for low to medium speed segment. Single-track blister machine with rotary sealing and a continuous motion cartoner. The modular line makes it ready to be connected to different track & trace systems, or end of line packaging solutions. PRODUCTION Output blisters/minute: 300 max. Output cartons/minute: 10 – 300 (min-max) Forming cycles/minute: 100 max. Die-cutting cycles/minute: 300 max. Foil width max: 165 mm Forming area max: 190 × 150 mm Die-cutting area max: 100 × 150 mm Forming depth max: 12 mm Forming material reel diameter max: 700 mm Lidding foil reel diameter max: 300 mm Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS Ledpfx Asxzuhvsgzeak Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm Weight (approx): 5,300 kg

Condition: ready for operation (used), Year of construction: 2000, A Uhlmann blister machine including new Scanware for fill-good inspection Spectra CL is available. Index length: 160mm, max. forming capacity: 80cycles/min, packaging capacity: 240blisters/min, forming film materials: plastics/aluminium, lidding film materials: composite films/aluminium, max. forming depth: 25mm, max. film width: 300mm, film core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 6500kg. Including a defective HAPA 216 blister printer. Dokumentation vorhanden. An on-site inspection is possible. Lsdpfx Agoxyk Uvszoak

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Ljdpfxov Nkvcj Agzeak Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Lasdpfx Asvubapogzjk Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Ledouhn Diepfx Agzjak Turntable

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Max. format range Lsdpfx Ajv D Ipiogzjak [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Condition: ready for operation (used), Year of construction: 2003, A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled. Laedpsucfw Aefx Agzok

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Ljdpfx Ajuk Dwfsgzeak For spare parts only!!

Condition: ready for operation (used), Year of construction: 2009, Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used. Ledpfsn R Nhfex Agzoak

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Lodpfsif Elgex Agzeak

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Lasdpfjx Ncu Nex Agzek Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Lajdpfoxftqdox Agzsk Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Ledpfjiit Erex Agzsak Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 Laodpfx Aoxvwcxsgzjk X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Lodjx D U Aropfx Agzsak Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Rigid Box Corner Pasting Machine GC-40 A brand new device. The machine glues cardboard corners with paper tape or foil. Technical data: Tape length 5-35mm Laodpfxswfrate Agzjk Hoof depth 10-300mm Tape width 19mm Efficiency 20-40 cycles/min Weight 230kg Power supply 230V

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Laodpfx Agex D Tbmjzjk Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Thermographic machine Adana Mo. 318 for relief printing Working width 32 cm. Very good condition, machine ready for operation. Ljdpfxowundaj Agzsak Description: Easy-to-use handheld machine: the material for thermography is sprinkled with powder. The material is then placed on a conveyor that passes under the oven to achieve the desired thermographic effect. The conveyor speed is infinitely variable and can be precisely set using a potentiometer. The heating unit can be raised or lowered or even moved forward, depending on the requirements of thermography. The adjustable conveyor speed allows thermography at different speeds and with temperature control. Power supply 220 V single-phase

Condition: like new (used), Mini Pak’r Air Cushion Machine Lodpfxew D E N Ee Agzeak The machine creates air-inflated fillings from the foil sleeve. 230V power supply Weight about 6 kg.

Condition: good (used), Banding machine TP-601 D1 The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 10mm Power supply 230V Weight 200kg Lodpjw D E Risfx Agzeak

Condition: excellent (used), Eyeletting machine for advertising banners Ljdow Ed U Aspfx Agzsak The device is in perfect condition, ready for work. Technical data: 1 head laser indicator Foot pedal operated