Burnishing machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2

Cone roller burnishing machine HAUSER 438

Brügg, SwitzerlandSwitzerland dealership location
6614 km
ready for operation (used)
Technical data Cjnxi2cm Maximum plug diameter 1.0 mm Maximum plug length 3 mm Minimum plug diameter 0.10 mm Maxi. Length with moving 15 ... more
5

Burnishing Machine HEGENSCHEIDT 7794

Staufenberg, GermanyGermany dealership location
6540 km
1996
used
clamping length: mm roll diameter: mm y-travel: mm total power requirement:10 kW weight of the machine ca.:5,5 t dimensions of the machine ca.: m E2sxdzrn0 Center bearing turning, smooth rolling and deep rolling machine. Crank shaft lenght 443,5 mm Oscillation circuit diameter 144 mm more
11

burnishing machine FEMA ATZ61

22946 Großensee, DeutschlandGermany
6505 km
1996
unexamined (used)
Burnishing-machine Year of construction: 1996 -used- technical details: Ausführung: PT100 / PT1000 Dimensionsanzeige: °C(Standard) Meßgerät: 3 1/2 stellig Meßrate: 2,5 Messungen/ Sekunde Anzeige: LED 12,5mm, rot Polarität: autom. *-* Zeichen Dezimalpunkt: programmierbar Schutzart/ Front: IP60/ DIN 40050 Arbeitstemperatur: -10°C ...+50°C Schaltausgänge: 2x Schließer/ Öffner Grenzwerte: programmierbar Relaisdaten: 2 x 230V/ 5A Bbwigeiz32 Anschlußart: Liftklemmen Gehäusefront:: D... more
5
Gebr. hydr. Burnishing / burnishing machine Make HEGENSCHEIDT Model 7487-1 mach.-No. .: 201 404 Year 1984 Roll width 30 mm Motor: 1,10 kW main drive hydraulic 0,75 kW 0,10 kW Wälzölpumpe External dimensions: Width 1500 mm Depth 1600 mm Height 2000 mm With rollerhead HZF 80/56/30 0515-4 feeder Cfwy0gf7 more
1

Roller machine EIGENBAU

Wiesbaden, GermanyGermany dealership location
6534 km
1987
used
Lifting height: 400 mm 12 speeds of the bench press drill INTERGRENN: 210-2580 RPM Lmy8x Drive motor: 380 V, 0.75 kW Space required: 950 x 650 x 2030 mm Approximate weight: 150 kg more
6

BURNISHING MACHINE STRAUSAK 119

Bienne, SwitzerlandSwitzerland dealership location
6613 km
used
BURNISHING MACHINE "STRAUSAK" TYPE 119 with loader W-39 (n°138), on base Manufacturing origin Swiss Netweight 150 kg Custom position 8462.21 30 TECHNICAL DATA Bak3ia0yhw Pivot dia. 0.05 – 2 mm Pivot length up to 8 mm Shoulder distance up to 25 mm Max. blank length approx. 40 mm Burnishing wheel 62 mm more
1

Cone roller burnishing machine HAUSER 430

Brügg, SwitzerlandSwitzerland dealership location
6614 km
ready for operation (used)
Technical data Maximum plug diameter 6.0 mm Maximum plug length 4 mm Minimum plug diameter 0.50 mm Total length of the workpiece 60 G9qqygjf3 ... more
5

Burnishing Machine HEGENSCHEIDT 7891-4NC

Staufenberg, GermanyGermany dealership location
6540 km
1992
used
clamping length:847 mm roll diameter: mm y-travel: mm total power requirement: kW weight of the machine ca.:6 t Wq3s0nl7 dimensions of the machine ca.:6,5 x 4,1 m Center bearing turning, smooth rolling and deep rolling machine. Crank shaft lenght 443,5 mm Oscillation circuit diameter 144 mm more
2

Cone roller burnishing machine HAUSER 6609 (430)

Brügg, SwitzerlandSwitzerland dealership location
6614 km
ready for operation (used)
Technical data Maximum plug diameter 6.0 mm Bciuhkjsb9 Maximum plug length 4 mm Minimum plug diameter 0.50 mm Total length of the piece of work 30 ... more
36

Deburring Machine Fladder AUT-1000 VAC

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2006
ready for operation (used)
Burr removal brush unit (int. no. 000119), #355 Bclxea9qj0 more


burnishing...
daily

New machines via email!

Stay updated!
3
SCHNEEBERGER sharpening machine, type Centromat Hcmlipzka more
7
Single lip grinder Bclpv7ebe2 With cabinet Integrated dust collector Grinding disk with flange Collets S20x2 16 Pc. Manual Deckel SOE more
5
Heidelberg MOZP-S+ Year:1989 Counter: 39 mio Size: 48x65 Details: Conventional dampening Stream feeder S3knfh Bclynyed8g Weko powdering Perfecting Plusversion more
5

Surface Grinding Machine - Horizontal FAVRETTO MC 100

Mönchengladbach, GermanyGermany dealership location
6371 km
1989
used
grinding length:1000 mm grinding width:700 mm workpiece height:650 mm grinding wheel size:406 x 152 x 100 mm grinding wheel speeds:1400 U/min Lu787 table surface area:1000 x 500 mm feeds of table:1 - 5000 mm/min table load:1,0 t cross feed autom.:0 - 2000 mm/min. cross adjustment:min. 0,001 mm total power requirement:23 kW weight of the machine ca.:7 t dimensions of the machine ca.:4,75 x 3,4 x 2,70 m power adjustable magnetic plate 1000 x 500 mm dressing device coolant attachment with paper f... more
3
Stationary screw driving unit, screwdrivers, Armierungsschrauber Qky9h9uve The model is a stationary feed screw driving unit to screwing the screws into wood, plastic and metal, in this version specifically for reinforcing mounting in PVC profile rods more
16

Bending Machine Kunkel URM 30 F

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Bclw8lzfnh more
4

Jig Grinding Machine VEB-MIKROMAT MIKROMAT 6 S

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1987
used
voltage 3 x 380 V output 10 kw length x width x height 4200 x 2800 x 3150 mm weight of the machine ca. 5 t - CNC control: Sinumerik S3 - Table length: 1000 mm - Table width: 630 mm - Max. Internal grinding diameter: 250 mm - Max. Distance table - spindle grinding: 665 mm - Inclination angle of tool feed infinitely variable + / - 122,2 mrad Fxlmq3avw - Longitudinal travel (X-axis): 710 mm - transverse travel (y-axis): 400 mm - Travel of the vertical slide: 510 mm - Max. Angle with conical loo... more
7
Single lip grinder With cabinet Integrated dust collector Cgukinbq Grinding disk with flange Collets S20x2 16 Pc. Manual Deckel SOE more
6
turning diameter 250 mm turning length 1100 mm clamping length 1290 mm Control BoschRexroth Indramotion MTX tool taper VDI 40 Main Spindle: spindle head A8 spindle turning speed - stepless 5.500 U/min Bzbgk27m spindle motor 48,3 / 37,7 kW max. torque on the spindle 384 / 399 Nm c-axis 0,001 ° rapid travel (x and z-axis) 40 m/min x-travel 320 mm y-travel +/- 50 mm z-travel 1290 mm total power requirement 120 kW weight of the machine ca. 26 t dimensions of the machine ca. 2,95 x 3,45 x 3,9 m ... more
5
cutting width:2500 mm Numbers of torche:2 Type of gas: Dpiovrn total power requirement: kW weight of the machine ca.:4,1 t cutting length:6000 mm radial tube cutter Ø:1000 max. mm HPM High Performance Machinery Plasma and Oxy-Fuel Cutting Machine or Gantry Cutting Machine with a Plasma and Oxyfuel Cutting Range of 2500 x 6000mm, Plasma Cutting Thickness 3 - 35mm, 1 x Plasma Cutting Source HPR 260 XD with 260 AMP, 1 x Oxy-Fuel Burning Unit, Drilling Unit for Drilling and tapping, including su... more
5
Slicer, slicer, slicer -Shop slicing machine Cbzjir8i Dimensions 600/600/H450 mm Power 250 Watt -2 x machines available Price PCs Weight 50 kg / piece more
18

Bending Machine Kunkel MB 10

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
Hcthzv3re more
3
several drive gear KEA for Bickel punching machines SGU Euhgepzbq overholed more
9
Automatic tapping machine with leadscrew Cap M3 to M8 in steel M12 in brass and aluminium Bclnnzhpvj With several leadscrews Dubble tapping head All on a table more
6
turning diameter 250 mm turning length 1100 mm clamping length 1290 mm Control BoschRexroth Indramotion MTX tool taper VDI 40 Main Spindle: spindle head A8 spindle turning speed - stepless 5.500 U/min spindle motor 48,3 / 37,7 kW max. torque on the spindle 384 / 399 Nm c-axis 0,001 ° rapid travel (x and z-axis) 40 m/min x-travel 320 mm y-travel +/- 50 mm z-travel 1290 mm total power requirement 120 kW weight of the machine ca. 26 t dimensions of the machine ca. 2,95 x 3,45 x 3,9 m The eff... more
5
External - Internal Grinding machine Height of centers 180 mm Max turning diameter 360 mm Distance between centers 1500 mm Lunette Wheel flange Vsh8nu Bath decanting filter Bath settling fabric filter (paperless) Dimensions mm. 4200x1600x2000h Dimensions mm tank 1800x800x700h full accessories more
4
-Pinole ø 90 mm Groove on spindle 6 x 4.3 mm Fine toothing for feed 130 mm long Qk3hr2fyc Sleeve length 210 mm Splined shaft Ø32 mm 6 x 6 mm teeth, length 172 mm square drive 12 mm Recording SK30 Storage ball bearings -in wooden box Weight 12 more
14

Bending Machine Kunkel URM 30

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
Bclw7yw0ff more
2

Spot welding machine DALEX SL 25/EA4

Gebhardshain, GermanyGermany
6478 km
refurbished (used)
As LEX rocker arm spot welding machine SL 25/EA4 Compressed air-operated, water cooled Rated output at 50% ED: 25 kVA SEC short circuit current: 22.4 k S open-circuit voltage: 5.2 V Electrode force: 36-278 daN Arm projection: 180-500 mm adjustable Arm distance: 140 or 300 mm complete with 8-position switch for power control Cq3evzt3 as well as 4 times asynchronously control unit for single-point/series point Sample photo more
4

Thread Boring Machine - Vertical SYDÉRIC T 6

Bünde, GermanyGermany dealership location
6460 km
1995
used
thread capacity 6 thread pitch 1,5 mm throat 130 mm thread bore capacity in steel 1,5 - 6 mm 9h22q9nuj thread bore capacity in brass 3 - 10 mm spindle stroke ca. 40 mm speeds 6, von 290-1240 U/min table-size 200 x 160 mm total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,5 x 0,4 x 1,8 m Condition: very good Electric 380 Volt Machine base Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
4
Quin Systhems PTSM322 mini Machine Manager, serial number according to the photo, good condition, 100% needed, functional, included with com. photos Bcjwymrpf2 more
9

NC surface grinding machine Favretto MC100

Beckingen, GermanyGermany dealership location
6468 km
1995
good (used)
NC surface grinding machine Manufacturer Favretto Type MC 100 Bauajahr 1995 Max grinding length 1000 mm Max grinding width 650 mm Grinding height 500 mm Magnetic plate 1200 x 600 mm Band filter system Extraction Various grinding wheels Documentation Machine is functioning in a used 100% Tw0wzpex more
4
Slicer, slicer, slicer Operating voltage 380 V Download slicer Due7ki more
18

Bending Machine Kunkel URM 30 E

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Hctkzbuzo more
1
CNC folding machine (2.500 x 5 mm) SMA-REF-6271 Type: bending presses Manufacturer: Fasti Model: 215 25/5 Year: 1997 Control: FASTI FM 200 Working range: Working width: 2.500 mm Sheet thickness: max. 5 mm Stroke upper beam: 350 mm Bcl0d90d23 Condition: ready for action under power Location: Northern Germany Dimensions: Weight: 6,5 tons Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
3

Spot Welding Machine ARO 1245 SC

Bünde, GermanyGermany dealership location
6460 km
1986
used
current capacity 28 kVA throat 350 mm contact pressure capacity 550 daN welding power in mm 4 + 4 st steel plate in the continuous operation light metal 1,6 + 1,6 mm secondary current intensivity between 17.200 + 24.000 Amp. electrode diameter 25 mm normal electrode stroke ca. 50 mm water consumption bei 2 bar= 340 Ltr./h weight of the machine ca. 300 kg dimensions of the machine ca. 0,9 x 0,5 x 1,5 m Condition: good T3beduw Electric 380 Volt Foot pedal Electrode adjustment pneumatic ... more
1
370x520 mm (14.5x20") approx. 18 mio. impr. Alcolor CP-Tronic Autoplate Autom. Ink roller washer Autom. blanket wash-up device Perfecting 1/1 Bclqeg3pgl Low-pile delivery Stream Feeder Ultrasonic double-sheet control Powder sprayer Available: immediately more
5

Milling Machine DECKEL FP4NC

More Deckel Fp 4
Kaiserslautern, GermanyGermany
6535 km
1991
excellent (used)
OVERVIEW: Brand: DECKEL Model: FP4NC Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 28000 Location: Netherlands Origin country: Germany Nep9j CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 450 mm more
5
Milling machine, vertical milling machine, tool room milling machine Machine is improved Clamping table 1250 x 280 mm Luxx2 Traverse path x/Y/Z 850/280/400 mm Spindle retainer SK50 -Drehzahlen 28-1400 RPM Dimensions 1300/1800/H2200 mm Weight 3500 kg more
12

Bending Machine Kunkel MB 10

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Cqejxxrm more
3
gebr. Bench drilling machine make TRU TOOLS/Taiwan Model TT 18. No.: 044971 year of 1978 Spindle mount MT 2 Bohr-Ø 20 mm Throat depth 220 mm Drilling depth 80 mm Table size 280 x 280 mm 9 spindle speeds 200-3200 RPM Motor 0.75 kW External dimensions: Width 400 mm Depth 750 mm Height 1050 mm W88twdhd With Keyless chuck Albrecht 3-16 mm more
1
370x520 mm (14.5x20") approx. 38 mio. impr. Classic Center Alcolor Autoplate Autom. Ink roller washer Autom. blanket wash-up device Low-pile delivery Ultrsonic double-sheet control Wvfwdp8j Stream feeder Plusversion Powder sprayer Available: immediately more
4

Turret Punching Machine AMADA EUROPE 255

Kaiserslautern, GermanyGermany
6535 km
2005
excellent (used)
OVERVIEW: Brand: AMADA Model: EUROPE 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 31646 Location: Spain Origin country: France CONTROL UNIT: Brand: GE FANUC Model: Series 18i-PB MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Ctawehtc Movement: 1250 mm more
5
Flügelglätter, Betonglätter, Estrichglätter - without straightening iron Vqlode Weight 60 kg more
18

Bending Machine Kunkel URM 30 E

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
Wvvjk more
3
Including: - HEIDENHAIN Glastäbe, - 1 vise, 1 part head MECO with accessories Neot2 more
6
gebr. 5 spindle copy milling machine make ELUMATEC Model KF 178/50.-No.: 20457 year 1998 Bclyuj79w3 Number of spindles 5 Cutting area after stroke, and template above 340 x 100 mm Stroke 110 mm Milling range below 240 x 85 mm Stroke: front 95 mm rear 45 mm each right and left milling unit built: Hub: length 160 mm Cross 100 mm vertical 80 mm Spindle speed 12000 RPM Air 7 bar 5 Motors 0,74 kW External dimensions: length 2800 mm Width: 1200 mm Height 140... more
5
1 CNC Multitasking Machine Mazak Integrex i-400 x 1500 U Mfg. year 2013 Mazatrol Matrix 2 control 5-axis simultaneous max. turning diameter 658 mm max. turning length 1.519 mm main spindle AC 30 kW max. spindle speed 3.300 rpm spindle bore 112 mm max. bar working capacity 102 mm C-axis, 0,0001° milling spindle AC 22 kW max. spindle speed 12.000 rpm B-axis, 0,0001° Capto C6 tooling system ATC for 72 tools tool identification with ID-chip Bcluhlb0ud NC tailstock, MK5... more
6

Bending Machine Durma AD-S 30100

Kaiserslautern, GermanyGermany
6535 km
2013
excellent (used)
OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2600 mm Measurements depth: 4500 mm Measurements height: 3100 mm Machine weight: 9500 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3050 mm CONTROL UNIT: Brand: CYBELEC Model: ModEva 10S MEDIA: Main electronic connect... more


burnishing...
daily

New machines via email!

Stay updated!

to

to

Edit search
BURNISHING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close