Used Blister Machine for sale (64,828)

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. Bodpfx Afjyuc Hzo Hslk You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! For spare parts only!! Bledpjuk Dwfefx Af Hek

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Turntable Blsdpfjuhn Diex Af Hsk

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Blsdpoy Anifofx Af Hjk

Condition: new, Year of construction: 2020, functionality: unexamined, type of input current: AC, input voltage: 220 V, film width: 450 mm, roll diameter: 300 mm, overall weight: 600 kg, input current: 16 A, cutting length (max.): 6,000 mm, additional equipment features: SZCZĘKI Z EUROZAWIESZKĄ, We offer this new FLOW PACK type blister packaging machine from DID-PAK, model CB-450, manufactured in 2020. – The machine is 100% complete; the product infeed conveyor is not mounted in the picture because, after delivery by the manufacturer, it was not integrated into the production line, and therefore, there was no need for its complete assembly. Technical specifications of the packaging machine: PERFORMANCE Up to 100 products per minute Film speed up to 40 m/min The characteristics of the product and film may affect the machine's performance. Parameter Description: Model: CB-450 Voltage: 220 V Frequency: 50 Hz Power: 3.4 kW Current: 16 A Date of manufacture: 2020Y 01M Serial number: Weight: 600 kg Notes: The characteristics of the product and film affect the performance. Cutting length: 50–6000 mm Product width: max. 210 mm Product height: max. 50 mm Roll diameter: ≤ 300 mm Core diameter: ≤ 75 mm Material width max.: 450 mm Roll weight max.: 25 kg Voltage: 220 V, 50 Hz Power consumption: 3.4 kW Machine weight: 600 kg Dimensions: 3900 × 850 × 1500 mm Bledpfx Afezk Hfxe Hsk Cutting type: Rotary Motors: Dual frequency If you have any questions or require additional information, please send a message or contact us by phone.

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. Blsdpfxezcftgo Af Hjk The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Bodpjv D Ipijfx Af Holk Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm See PDF for details.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included Bodpfx Ajyzf Ucjf Hjlk 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Year of construction: 2022, condition: new, machine/vehicle number: AM00222071301-01-01, Manufacturer:AUTOVAK Model: M320 Main material:Stainless steel Dimensions:3,550 mm x 1,050 mm x 2,300 mm Weight: ca. 1,200 kg Power supply: 3 x 400 V + N + E / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Width of top web:305 - 310 mm Bsdpfx Ajpfcd Asf Hslk Roll core diameter: 3" Roll diameter: 400 mm Width of bottom film:322 +/- 1 mm Roll core diameter: 3" Roll diameter: 300 mm Cutting size: 130 x 100 mm Forming depth:15 mm Loading area length:450 mm Installed power: 15 kW Noise level:Less than 72dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per stroke each with opening aid at one corner; Inner dimensions: 105 mm x 75 mm x 15 mm Condition: Like new (demo model)

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Bodpfxsy Slchj Af Helk Possible to supply with IMA A83 horizontal cartoning machine

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Bodpfx Afeyyplcs Hslk

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Bljdpfxov Nkvcj Af Hok Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Bedpfx Afeif Elgj Helk

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: Bodpfxstndpzo Af Helk - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, Bljdpfozqr Hnox Af Hjk 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs Blsdpfxeznkkae Af Hok

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: Blodpfx Afjzgwq Ds Hok ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Bljdpezmyzfefx Af Hok

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg Bljdpfxsyhdi Re Af Hsk

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Bedoznwu Sspfx Af Helk Subject to prior sale. Under power in Hungary.

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Bedpfxoyzi Ias Af Helk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Blsdjzl S T Repfx Af Hek Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Blodpfx Afjzlgbpo Hsk Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min Bodpfxjzlaimo Af Hslk High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. Blsdpfozlahiox Af Hek The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.