Used Thermoform for sale (147)

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Fpsdpfezx Ergex Al Usn Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Year of construction: 2010, operating hours: 3,037 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 139737, Multivac R-145 thermoformer from 2010, in excellent condition and recently removed from production. It can be used for both soft and hard film. Film width: 420 mm. Includes 4 moulds: No. 1: 375 x 184 mm, maximum depth 100 mm. No. 2: 355 x 187 mm, maximum depth 65 mm. No. 3: 1:2, 132 x 95 mm. No. 4: 1:3, 190 x 110 mm. Built-in vacuum pump and MAP machine. Fsdoz I Dfzopfx Al Ujpn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Fpedpfxsrh E Ibe Al Usn The machine is still in production mode, but is available immediately.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 160,857 h, functionality: fully functional, machine/vehicle number: 396, type of input current: AC, input voltage: 400 V, compressed air connection: 8 bar, sheet thickness aluminum (max.): 80 mm, pressure: 16 bar, film width: 560 mm, roll diameter: 1,200 mm, overall weight: 3,000 kg, input current: 48 A, heating capacity: 19.4 kW (26.38 HP), Equipment: cooling unit, documentation/manual, ILLIG RV 53 Thermoforming Machine + a cooling unit – PS, PVC, PET & Other Thermoplastics Fedjz Hi Ilepfx Al Ujpn The machine is suitable for the production of thermoformed products from PS, PVC, PET and other thermoplastic materials. The machine has been regularly maintained and well cared for throughout its operating life. It has only been used for approximately a few hours per day on average, resulting in relatively low operating hours for a production machine of this type. The machine is still in operation, allowing prospective buyers to inspect it under working conditions. A live demonstration is available by prior appointment. This is a good opportunity to acquire a well-maintained ILLIG RV 53 thermoforming machine with the advantage of being able to inspect and test the machine in actual production before purchase. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. * Punching force: 180000N * Production speed: max. 45 cycl/min Fpodon Utzfopfx Al Usn * Sheet width min: 150 mm * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Maximum film width: 540 mm Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Fjdszu Nx Nspfx Al Uepn Price: 23,000 EUR

Year of construction: 1987, condition: used, Year of manufacture: 1987 Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with lower and upper heaters. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021, is fully functional, and can be seen in operation near Warsaw. Fpjdpszu Nvuofx Al Usn Price: 35,000 EUR

Year of construction: 1986, condition: used, Year of manufacture: 1986 Fpodpfozu Nw Ejx Al Usn Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 Fpjdjzt Sukspfx Al Ujn New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Fpodpfxoz I Sbdj Al Usn Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 2019, condition: ready for operation (used), A horizontal thermoforming, vacuum and packaging machine from Ulma for flexible and rigid film packaging from the food industry is available. Frame length: 4000mm, working height range: 850mm-950mm, max. film width: 420mm, max. film index: 360mm, max. forming depth: 130mm, max. film roll diameter: 350mm, max. film roll core diameter: 76mm, vacuum pump: Busch R5 RA 0302 D, machine dimensions X/Y/Z: approx. 1050mm/5000mm/1950mm. Including rigid and flexible film rolls. Documentation available. An on-site inspection is possible. Fodpfx Aezpywrel Uepn

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Fpodpfszqu Eyjx Al Ujn

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Fedpjznbp Tofx Al Uspn Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Fodpfoy Anifsx Al Uopn

Year of construction: 2010, condition: excellent (used), functionality: fully functional, COMPLETE AMUT SHEET EXTRUSION AND ILLIG THERMOFORMING LINE Fpedpfozgtf Djx Al Uen AMUT sheet extrusion line: Maximum operating speed: 30 m/min Main extruder (layer A): EA100 / 35D Right co-extruder (layer B): EA600 / 33D Materials processed: PP, PS, or HIPS Hourly production: up to 450 kg/h Maximum usable width: 720 mm Sheet thickness: min/max 0.15 / 1.8 mm Amut sheet extrusion die Calender with a width of 1000 mm Diameter of heating rollers: 600 mm ILLIG thermoforming machine Model: RDKP Maximum sheet width: 805 mm Maximum roll diameter: 1600 mm Various molds included 4 complete lines available Year: 2010

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Fpsdjzumrmopfx Al Ujn Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Fpedpfx Aljwp Ac Hs Uon Previously used for packing various meat products. Last run in May 2025.

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Fpedpfx Alszumwcj Uon Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Fsdpfxezumuuo Al Uepn Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Fodpfxjylnz Se Al Ujpn

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm Fsdpfjft Sccox Al Uopn -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Year of construction: 2005, condition: used, functionality: fully functional, The deep-drawing machine is an automatic machine for forming, filling, and sealing. Its modular design is a key feature. These modules are arranged one after the other, in the sequence of operations. They are designed as independent units and can be exchanged within a given model series. Fpjdpfx Alsy Txcqe Uen tel. 694429279

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Fpedpfx Aezumt Dol Usn Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Year of construction: 2014, condition: good (used), Multivac R145 Thermoformer The Multivac R145 Thermoformer is a versatile and efficient packaging machine, designed for high-speed and precision packaging in various industries such as food and medical sectors. Built in 2014, it offers advanced technology and customizable tooling to meet a wide range of packaging needs. Will be shipped with 1 tool, but we can arrange new tools for this R145 for very comparative prices. Tool 1x4: Packing Size 80x195 mm. Manufacturer:Multivac Model:R145 Year:2014 Production hours: 2.451 Power Supply:400/230V / 50 Hz Fpedpfjyz Shiox Al Uen Power:12,5 kW Machine dimensions (LxWxH): 4.600x1.050x1.900 mm Film width: 360 mm Max. cut off length: 195 mm Vacuum Pump: Busch 250m3/h Machine weight: 1.000 kg.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Furthermore, there are other similar machines. Fjdpfx Aley Nzhbs Uspn Currently physically located at the subsidiary plant.