Used Thermoform for sale (177)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Böblingen
7,946 km
MEP COBRA 352 SX EVO metal sawing
MEPCOBRA 352 SX EVO Aluminiumkreissäge
Call
Condition: new, MEP COBRA 352 SX evo [Semi-automatic]
Article number CB352SX
motor power 1,5/2,2 kW
belt opening 180 mm
belt dimensions 350x32x3,4
Weight 285 Kg
Speed 1700/3400 1/min.
Cutting surface 0° 120 / 105 / 180x70
Cutting surface 45° right 120 / 100 / 135x60
Cutting surface 45° left
Cutting surface 60° right
Cutting surface 60° left
Description
Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel.
Basic equipment:
-Machine for miter cuts from 45° right to 45° left.
-Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left.
Iodpfxjchkv Ij Agzotr
-* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors.
-CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens.
-New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings.
-New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred.
Electrical equipment:
-New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal.
-Saw blade stroke programmable directly from the control panel, to adapt to the cutting material.
-Ball bearing mounted rotary table to ensure easy and accurate rotation.
-Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts.
-Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left.
-Swarf extractor with preparation for OPTIONAL extraction system.
-Automatic saw blade lubrication system, operating only at the start of the cut.
-Machine is supplied without saw blade.
-Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil.
-Tool and instruction manual with spare parts list.
For further technical data, please refer to the attached PDF document. Catalog 2nd page !
Listing
Germany
7,870 km
Vacuum Deep-Drawing Machine
SealedAirCryovac VS 26
Call
Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Itodpfx Agoxaphbjzjr
Listing
Bremen
7,639 km
Heating cabinet, drying oven, forced air circulation
AllthermWS 3750 -- 2 x 250°C
Call
Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven
Alltherm WS 3750 - 1.5 - E - 24l
The heated cabinet is equipped with two separately controllable chambers.
Maximum temperature per chamber: 250 degrees Celsius
Approximate dimensions:
Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm
Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm
Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm
The left chamber is additionally fitted with a viewing window.
Location: Siegen
____
Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors.
The information and images were provided by the owner and released for publication.
Itjdpfx Agjwuqvrezor
The appearance of the items on offer corresponds to their age and the photos shown.
The technology and wear and tear of the items offered are age-appropriate.
Used machines are sold exclusively to commercial customers and without warranty.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Urk
7,503 km
Weighing & filling machine
CabinplantMHW 40-24
Call
Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor
Machine functions:
- Product is fed to infeed system, consisting of an elevator;
- The elevator is controlled by the infeed sensor of the multihead weigher;
- The multihead weighing machine discharges weighed out portions to Distributor / Depositor;
- Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer;
This line consist of the following equipment:
- SS Stair;
- Infeed conveyor belt;
- SS Platform;
- Cabinplant MHW 40-24 Multihead Weigher;
- Cabinplant Depositor / Distributor;
Cabinplant MHW 40-24 Multihead Weigher
Manufacturer: Cabinplant
Model: MHW 40-24
Year: 2013
Capacity: 150-500 gram
Weighings/min.: Up to 120
Pan Size: 4 liter
Number of pans: 24
Machine Dimensions LxWxH: 2.200x2.125x2.500 mm
Machine Weight: 1.100 kg.
Multihead Weigher is fully checked and serviced by Cabinplant
Cabinplant Depositor / Distributor
Manufacturer: Cabinplant
Model: Sausage Depositor
Ijdswyu Trspfx Agzetr
Year: 2014
Capacity: 150-500 gram
Weighings/min.: Up to 120
Filling Capacity: 2x5 movable pitch
Listing
Gronau (Westfalen)
7,613 km
Membrane press
BuerkleBTF 1628/60
Call
Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press
Model BTF 1628/60
Year of manufacture 1997
System for coating smooth and shaped MDV parts with thermoplastic films from a roll or as cut-to-size, for PVC, PP, high-gloss PVC, ABS film.
Suitable for the thermoforming or membrane process.
Max. part size 1250x 2550 mm/
Part thickness 6-35 mm
Heating plate dimensions 1600 x 2800 mm
Max. heating temperature 140°
Itsdpfxjw Enl So Agzer
Stroke 230 mm
Control Siemens
Total connection 38 Kw
with 2 aluminum tables and reserve table
Weight 16.5 t
Press length: 2,550 mm
Press width: 1,250 mm
Max. workpiece thickness: 35 mm
Discover more used machines
Listing
Borken
7,622 km
Mobile plasticiser Thermoplastics
KMH60 S
Call
Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics
Manufacturer: KMH
Type: 60 S
Hydraulics PN: 150 bar
Pn: 16,5 kW
P heating: 8 kW
400 V
Single STW 150/1-3-10-K
Temperature control unit
3.9 kVA
Heating capacity 3 kW
380 V
Itjdpfx Asg H I Nxjgzor
Hydraulic pump
Complete factory closure,
large selection of storage platforms, pallet racks, shelf racks, paternosters.
High-quality industrial machines, lathes, grinding machines, hand machines.
Further articles - new and used - you will find in our shop!
International shipping costs on request!
Listing
Gelsenkirchen
7,653 km
4 column press 400 tons PH4C
HIDRALMACViersäulenpresse 400T
Call
Condition: like new (used), Year of construction: 2016, passage width 2500 mm
stroke 900 mm
Total power requirement 62 kW
machine weight approx. 27,5 t
dimensions L x W x H approx. 3950 x 2200 x 4850 mm
Ijdpfx Agoin Et Nezotr
retraction force 40 t
Main cylinder 2 pieces
column diameter 220 mm
installation height 1300 mm
table size 2500 x 1600 mm
ram size 3100 x 16000 mm
table height above floor approx. 900 mm
forward speed 200 mm/sec
return speed 200 mm/sec
working speed 5 - 15 mm/sec
oil tank 1500 l
oil quantity 1200 l
pressure control adjustable from up to 50 - 400 t
thermoforming cushion 1400 x 800 mm
thermoforming unit capacity 30 - 60 t
deep drawing cushion stroke 250 mm
thermoforming cushion speed 5 - 80 mm/sec
robust machine body with solid welded construction
low maintenance and reliable
piston rod with induction hardening and chrome plating
T-slots according to customer requirements, if not specified
22mm according to DIN
CE certificate
manufactured according to EU standards
operating instructions, technical documentation, documentation in German language
engineering steel LCG ASTM A36
T-slots in table and ram according to DIN 650-22
Travel control adjustable via monitor
Light sensors front + rear: Sick 1300mm
Hydraulic components Bosch Rexroth
Monitor Siemens 12 inch
Electrical control box for wall mounting
Interior of the press illuminated with LEDs
Hydraulic block monitored by safety PLC
Energy control system: Reduction of the
idle consumption of the pump to approx. 2 kw
Remote control for remote maintenance
Two-hand operation on movable stand
Further information:
Pressure build-up up to 400 T within max. 4 seconds after closing the die.
Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Operation of the press can be manual, semi-automatic or fully automatic
Listing
Germany
7,870 km
Vacuum Deep-Drawing Machine
GeissT8 DU
Call
Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.
Itjdpfx Aswih Arogzor
Listing
Langwedel
7,678 km
Illig SK 74-C
IlligSK 74-C
Call
Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled
Year of construction 2006
serial no.426-0172
Iodpfxjr Nv E No Agzotr
+2 pallets with approx. 38 rolls of film
Dimensions in mm approx. 2200x1600x1600
Listing
Saue
7,985 km
Vacuum Forming Machine
Hassett3000x3500x1100
Call
Condition: used, functionality: fully functional, total height: 3,700 mm, total width: 5,000 mm, total length: 7,700 mm, For sale: well-maintained Hassett International vacuum forming machine.
The machine has a maximum working area of 3000 × 3500 mm and can form products up to 1100 mm deep. It is ideal for manufacturing spas, swimming pools, hot tubs, and other large-size products.
Technical specifications:
• External dimensions: 5000 × 7700 × 3700 mm
• Can be disassembled into smaller parts for transport
• Maximum sheet thickness: up to 8 mm (acrylic, ABS, etc.)
• The control computer allows switching on only the required heating sections of the oven and adjusting their temperatures – for smaller products, the entire oven does not need to be in operation
Included in the set:
• Oven (with ceramic heating elements)
• Hydraulic lift table
• Vacuum pump
• Vacuum tank
• Computer and control electronics
• Worktable
• One mould (octagonal, black)
The green rectangular mould is not included.
The machine is in daily use. Testing on-site is possible, and training can be provided. Upon request, we can provide contact details of a reliable company that can disassemble, transport, reassemble, and maintain the machine in the future.
Itedpfx Agsw Nhdhezsr
Listing
Graben-Neudorf
7,886 km
Vacuum packaging machine
GEAPowerPak XT 420
Call
Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series.
- Perfect for packaging pasta products.
- Viewing under production conditions (packaging of gnocchi) possible at any time.
- With matching feed belt and ExaktaPack brand scale (included).
Technical details GEA PowerPak:
- Film width: 350 mm lower web, 334 upper web
- Approx. 12 cycles / minute
- Forming tools: 1.1, 2.1, 2.2
- Rigid film, PP, PET, etc.
- Bottom web preheating
- Longitudinal and cross cutting with silent edge strip winding
- Machine length approx. 9m
- Draw-off: 60 mm
- Busch vacuum pump (included)
- Eject station and distribution pneumatic
- Flow cooler for cooling form and seal stations.
Isdpsua Hchofx Agzstr
Additional information on request and/or inspection gladly possible.
Listing
Leinfelden-Echterdingen
7,955 km
FGT Graphic Machinery - Shrinking Syst.
KARVILLETornado 2500
Call
Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020!
Year of Manufacture: 2008
_____
Machine Specifications and Equipment:
Tornado - Electric Tunnel
The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam
is not acceptable.
The Tornado provides the best solution for:
Shrinking for Difficult Shaped Containers
Shrinking for Water Sensitive Products
Shrinking for Heat Sensitive Containers like PET
Eliminating after-shrink wrinkles
Saving Energy - High Efficiency Design
Saving Space - No Need for Extra Leister Guns and Special Rotation Systems
Minimizing Mechanical Maintenance - Simple Machine Structure
Eliminating the need for Steam Boiler and Infrastructure.
This is ideal for blow molders, contract packers and thermoformers.
_____
Accessories Included:
Manuals
Keyes
Etc.
_____
Technical and Optical Condition:
Iedpfx Ajvxkatjgzjtr
• Technical: 9/10 (checked and in excellent running condition)
• Optical: 9/10 (cleaned and ready for immediate end-user deployment)
_____
Listing
Oberdiessbach
7,981 km
Tray sealer
MultivacT-600
Call
Year of construction: 2018, condition: ready for operation (used), For Sale: Used MULTIVAC T600 Thermoforming Packaging Machine – Year 2018
We are offering a well-maintained MULTIVAC T600 packaging machine from 2018, in excellent working and visual condition. The machine has been serviced regularly under a professional service contract and is fully operational.
Technical Specifications:
Ijdpfewwhp Isx Agzotr
Model: T600
1800 products/hour
High flexibility
Year of Manufacture: 2018
Voltage: 400/230 V, 50 Hz
Power Consumption: 9 kW
Nominal Current: 31 A
Main Fuse Protection: 32 A
Max. Short-Circuit Current: 5 kA
Phases: 3/N/PE AC
Included Tools:
3 complete forming tools:
95D cups – suitable for all heights
90D cups – suitable for all heights
147 x 204 mm gastro trays 500-1000ml – ideal for foodservice applications
Highlights:
Excellent condition, from a clean production environment
Always serviced through official MULTIVAC service partners
Perfect for food tech companies, dairies, and premium food producers
Availability: September/October 2025
Inspection: Available upon request
Listing
Berlin
7,943 km
Laminating Machine
Villars Maschinenbau
Call
Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since.
Iedpfx Agsq Ixglezjtr
Listing
Augsburg
8,082 km
Generator
KiefelG 8000
Call
Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available.
Itodpjw Hdzlsfx Agzsr
Listing
Buchloe
8,093 km
Meat processing machine
SealpackRE15
Call
Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1545012, total length: 4,500 mm, Sealpack RE15
Stainless steel thermoforming machine
Rigid and flexible film
Film width 320 mm
peel-off 200 mm
Bottom film holder in stainless steel
Pneumatic lifting system forming station (heavy duty)
Heating and forming via standard lid heating
Heating and forming with compressed air
Safety covers in stainless steel
Itsdpfxsu Dipzj Agzer
Free insertion distance of approx. 650 mm
Built-in vacuum pump 100 ccm (1 piece)
Foil transport chain 1/2" type K
Top and bottom chain guide
Sealing station with pneumatic stroke
Designed for vacuum and MAP
formats :
1.1 Is 2 x available with different widths
4.1
It is also possible to design additional formats !
Hard foil punch and soft foil cutter
Edge strip rewinder
Seal pack RE15
Stainless steel deep drawing machine
Hard and soft film
Film width 320 mm
Deduction 200 mm
Bottom film holder in stainless steel
Lifting system forming station pneumatic (heavy duty)
Heating and shaping via standard lid heating
Heating and shaping with compressed air
Stainless steel safety covers
Free insertion distance of approx. 650 mm
Built-in vacuum pump 100 cc (1 piece)
Film transport chain 1/2" type K
Chain guide top and bottom
Sealing station with pneumatic lift
Designed for vacuum and MAP
Formats:
1.1 There are 2 x available with different widths
4.1
There is also the possibility of designing additional formats!
Hard foil punch and soft foil cutter
Edge strip winder
Listing
Székesfehérvár
8,597 km
Repak thermo former machine parts
RepakRe25
Call
Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006,
220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m
Spare parts for sale. Picture 1.
Controller, electronic components, tools, vacuum pump, frame parts, etc.
Includes tools of several sizes. In the condition shown in the picture.
Complete forming parts set: 4000 EUR. See Picture 2.
Iedou Hz Tdepfx Agzetr
Flender motor ZF48-M100LB4, 250 EUR (Picture 3).
Busch vacuum pump Wv1000B-001 KDFC, 1200 EUR (Picture 4).
Automatic 2-line label printer and spreader, complete: 1500 EUR. Picture 5.
Rotary cutter for hard foil: 500 EUR (Picture 6).
Outfeed conveyor: 300 EUR (Picture 8).
For sale as a set for 4000 EUR, as is.
Complete die set: 2500 EUR.
HMI and electronic parts.
Other parts.
Listing
Krotoszyn
8,216 km
Packer/Packaging machine
MultivacR230
Call
Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing.
Itedpfx Agovzt Hujzer
Listing
Kremsmünster
8,291 km
DUOFORMER VERTICAL-Top value for money!
UNIVERSALFORMERSDUOFORMER VERTICAL Heizen und Pressen!
Call
Year of construction: 2025, condition: new, Do you want the BEST price/performance ratio? Contact us!
Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA!
DUOFORMER - Heating – Forming- Pressing!
The HEATING UNIT for all thermoplastic materials up to 230°C and
The VACUUM PRESS for daily use!
• No tricky placing of pressing layers
• No sliding of the former
• effortless closing and opening
• pressing of M-shapes
• operating from all 4 sides
DUOFORMER S VERTICAL- Producing without compromises!
Now on sale!
Vertical opening: work piece height up to 850 mm
Clamshell opening: See other sales offer on this platform!
Pressing surface LxW: 2880x1280mm
Heating surface LxW: 2600x1250mm
Overall dimensions LxWxH: 3400x1750x1500mm
• Heating drawer +230°C – 16kW
• 40 m³/h high performance vacuum pump (BECKER)
• 4 FESTO pneumatic-cylinders
• Trussed pressing frame
• Two hand safety operation
• Motion signal
Equipment:
Vacuum table with silicone membrane and
MEMBRANE FAST-CHANGE SYSTEM
•Fully welded, sturdy and robust steel construction
•pressure up to 9 t/m² (-900 mbar rel.)
•analogue vacuum pressure gauge
•mechanical vacuum pressure regulator
•transparent Silicone membrane up to 230°C, 780% elongation,
40 Shore-A
•robust, heat resistant phenolic resin ply working surface with
integrated air suction channels, thickness 16mm
•extra vacuum connector
(e.g. for external vacuum bag, vacuum clamping)
•with intecrated forklift pockets
•incl. swivel castors
Heating drawer with CAS-heating system (Controlled Air Stream)
•material thickness: 0 - 70 mm
•heating power: max temperature +230°C
•2 circulation hot air fans
•pull-out working surface with grating, grid 30 x 30 mm
•easy removable heating drawer
Control unit with 4“ SIEMENS touch panel
•hinged control cabinet on the right side
•variable temperature control up to + 230 °C
•temperature control with timer and alarm
•complete with cable and plug
Electrical connection3~ 400 V, 50/60 Hz, 17.5 kW
Itjdpfxeiquxgo Agzsr
Duoformer production capabilities:
● Pre-heating and forming of solid surface materials such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc.
● Pre-heating and forming of all other thermoformable materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc.
● Vakuumpress for bonding, coating, edge banding, flat pressing, forming, gluing, laminated bending, pressing, spot on profile fitting, veneering
Other dimensions on request!
DUOFORMER Maxi
Clamshell opening: work piece height approx. 650 mm
Vertical opening: work piece height approx. 1000 mm
Pressing surface LxW: 3380x1380mm
Heating surface LxW: 3000x1250mm
Heating drawer +230°C – 24kW
Vacuum pumps 40m³/h, 80m³/h, 100m³/h
Overall dimensions LxWxH: 3900x1600x1500mm
DUOFORMER Mega
For a whole length of solid surface material boards!
Clamshell opening: work piece height approx. 650 mm
Vertical opening: work piece height approx. 1000 mm
Pressing surface LxW: 4150x1780mm
Heating surface LxW: 3850x1250mm
Heating drawer +230°C – 32kW
Vacuum pumps 80m³/h, 100m³/h, 140m³/h
Overall dimensions LxWxH: 4700x2050x1500mm
UNIVERSALFORMERS
Direct – Honest - Experienced
Listing
Wang
8,343 km
Brushing machine
Rapha SystemsRBM 1500
Call
Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker!
RBM 1500
F e a t u r e s
• Four-head rotating brush
• Infeed inclined roller conveyor with separation
• Spiral brush for removal of loose glue residues
O p t i o n s
• Fifth head rotary brush
• discharge roller conveyor with
buffer function
• Deionization of the furniture fronts
after cleaning
• Modem for remote maintenance
A d v a n t a g e s
• Chaotic occupancy by automatic Adaptation to front thickness and size
• Up to 2000 parts / 8 h
Ijdpfx Ajd S Eagsgzetr
The RBM 1500 is a brush machine for film-coated
3DMöbelfronten.
The proven four-head rotary brush system removes the
Glue overspray on the backs of the furniture fronts
and achieves an optimal edge quality.
This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs
the fronts are singing. The RBM 1500 is for a performance of up to
designed for 2000 parts per shift. This is the machine
the optimal brush system for smaller and medium sized
Productions.
The RBM 1500 is with an automatic size and
Thickness detection of furniture fronts equipped.
This allows adaptation to chaotic loading
without loss of time in the run. The flexible control offers the
Possibility of brushing rectangle and contour parts.
The low-maintenance brushes and long service life ensure low production costs.
P r o d u c t i o n
Machine: RBM 1500
Front shape: Rectangle / Contour
Frontsize minimal (L x W x H): 180 x 90 x 15 mm
Maximum frontsize (L x W x H): 3000 x 650 x 38 mm
Brush operation: 2000 parts per 8 h
Standard parts of 650 x 400 mm
Listing
Rimini
8,475 km
Vertical blockmold machine
VIROmod. TNG-4
Call
Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure-
tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance
platform with ascent aid and fall protection.
Iodpfx Agopwbmbezotr
Block dimensions:
• Height: 4,100 mm
• Depth (usable depth): 1,300 mm
• Width: 1,040 mm
• Block gross volume: 5.5 m³
Cycle times:
• 12-16 g/l density - 20-22 blocks/hour
• 17-19 g/l density - 18-20 blocks/hour
• 20-23 g/l density - 16-18 blocks/hour
• 24-28 g/l density - 14-15 blocks/hour
• 29-35 g/l density - 12-14 blocks/hour
Filling system:
• Filling silo volume - 1 x 10 m³
• High-pressure suction blower - 11 kW
• Number of filling pistols - 2 pcs.
• Filling diameter - 300 mm
• Drive - hydraulic
Mechanics:
• Hydraulic system - 15 kW
• Demolding - hydraulic
• Door movement - hydraulic
Electrical equipment:
• Servo inverters: Mitsubishi
• Frequency inverters: Mitsubishi
• PLC: Siemens Simatic
• HMI panels: Siemens Simatic
• PC: Axiomtek
Trust Seal
Dealers certified through Machineseeker

Listing
Wang
8,343 km
Paternoster
Rapha-SystemsPaternoster 3800
Call
Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker!
Iedobgdv Iopfx Agzstr
Paternoster
For the membran press membrane press
FOILS-STORAGE-PATERNOSTER
for the foil-roles stock and at the membrane press
Technical Description:
Height of the paternoster 3800mm
Max. foil width 1600mm
Max. foil diameter 500mm 12pcs bearing rods
Size of the paternoster 1000x2370x3800mm
Inclusive foil transporter (trolly)
Drive capacity 1,5 kW
Total upload 4080 kg at a max. rolls weight of 340 kg
Tools weight incl. Up weight- 5240 kg
Specific ground-load capacity (1,89 to/m²)
Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm
Side panels - total all over the overall height
Protection lattice from 2,2 metres over the floor to the over edge overall-height
Load chain as a hollow-bolt chain
Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster
Rotation speed ca. 5,5 m/min
Control with a key-switch with return (TOTMANN) for switch on/off
Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A
Mains (net) fuse (construction sided)- 10A inert NO
Price on request
Listing
Rimini
8,475 km
Cyclic foaming machine ERLENBACH EVD2500
ERLENBACHEVD-2500
Call
Condition: excellent (used), Year of construction: 2005, Basic data:
Production year: 2005
Dimensions (LxWxH): 7580x4360x5120 mm
Weight: 6000kg
Operating voltage: 400/415V 50Hz
Power consumption: 20kW
Capacity at 20g/l: 1600kg/h
Touch screen control panel
Powder tank with screw feeder
Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual)
Iodpfxorfn Rvj Agzotr
Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene)
For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.
Listing
Wang
8,343 km
Turn over system
Rapha SystemsRDW 260
Call
Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker!
Function:
The feeding tray of the press is in position, the work piece carpet is pressed under the holding device.
With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device.
Advantages:
• The 3D-thermoforming productivity increases- because of quick clearing the
table
• Savings of time and staff - the preliminary cutting-out of the pressed parts is
removed completely
• Simple handling of the boards
• The foil edges of the 3D furniture doors are not damaged, because the foil is
not pulled over the edge of the door
• Automatic transfer of the whole carpet to a carpet trimming machine is
optionally available.
• The pins will be protected with this turn over system because the cutout of the
over standing foil is made not on the pin table.
Details:
• Rigid welded frame construction to accommodate the machine parts
• Standard size 2800 x 2220 mm x 1200 mm
• Hydraulic power unit
• Turn table consisting of 9 arms with a special surface of rubber
• Vacuum system with hose connections for the turn table
• Turning cycle approx. 18-25 seconds
• Control System: Siemens LOGO
• Protective fences and security devices
Itsdpfod S Dqnjx Agzsr
For the presentation of the turning process, a video is available.
Listing
Wang
8,343 km
Silicone Membrane, Silicon rubber
RAPHAMembrane Silikon, Naturkautschuk
Call
Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker!
MEMBRANES for membrane presses Silicone and Natural rubber
The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer).
POSSIBLITIES FOR DELIVERY:
The membranes can be cut to the Required size or supplied by roll.
SILICONE
Type: MS-2
Colour: milky white
Surface: textured/smooth
width (standard): 1680/2000 mm
polymer type: Silicone
hardness: 50° Shore
thickness: 3 mm
temperature range: min. -50°C/max.200°C
SILICONE
Type: MS-1
Colour: milky blue
Surface: smooth
width (standard): 1600/1800 mm
polymer type: Silicone
hardness: 45° +/- 3 Shore
thickness: 2 mm
temperature range: min. - 60 °C/max. +230°C
NATURAL RUBBER
Type: MNK-2
Colour: grey
Surface: smooth/smooth
smooth/textured
width (standard): 1700-1750 and 2000 mm
rubber: Natural rubber
hardness: 42°Shore
thickness: 2.5 - 4.0 - 5.0 mm
temperature range: min. - 20 °/max. +130°C
NATURAL RUBBER
Special two-part version for
Waterbed / oil-presses
Type: MNK-2 WB
Colour: grey/black
Surface: Both sides smooth
width (standard): 1700 mm
rubber: Natural rubber
hardness: 42°/60°Shore
thickness: 3,5 - 4 mm
temperature range:min. - 20 °/max. +130°C
Itodjd S Efaepfx Agzor
Standard SILICONE Rubber Sheet Type RSS
Colour: redbrown or transparent (other colours on request)
Surface: both sides smooth
Standard length: cut or 10m rolls (other lengths on request)
Standard width: 1200 mm - up to 1800 mm on request
Polymer: Silicone
hardness: 30° - 80°Shore
thickness: 0.5 - 10 mm
We make it easier for you to find: "thermoform"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Thermoform (177)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month

















































































































































































































