Used Planer Blade Machine for sale (66,106)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) Hfedpfx Abeypbx Es Tjd FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine - Hfsdpfju R Sz Tjx Ab Tod

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA Hjdpou R S Awofx Ab Tjfd - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, Hfodpfxsu R Sztj Ab Tod max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm Hedpoyrndmofx Ab Tofd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Hfedpfx Absv A Hgko Ted Total power requirement 2,2 kw

Condition: new, planing width: 335 mm, Replaceable knives for planer – Manufacturer: Kanefusa, for Marunaka planer with reversible knife system, length 335 mm, set of 2 pieces. Hfsdpfx Aeym Sc Aeb Tsd

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Hjdpfx Aeyrdc Esb Tofd Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia Hjdpfx Ajyrc Akjb Tefd X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Hsdex Symbepfx Ab Tofd Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: as good as new (ex-display), Year of construction: 2022, Working width: 530 mm Planer block: Tersa Number of knives: 4 Planing table length: 2300 mm Planing stop angle adjustable: yes Folding up of the planing tables: electric Hodpeh Ucg Uofx Ab Tjfd Maximum thickness throughput of the thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5 / 7 / 9 / 12 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction connection: 140 mm Machine length: 2300 mm Machine width: 990 mm Weight: 850

Condition: as good as new (ex-display), Year of construction: 2022, Working width: 310 mm Planer block: Tersa knives Number of knives: 3 Planer table length: 1320 mm Planer stop angle adjustable: yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: handwheel Planer thickness display: mechanical counter Feed speed: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3.7 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1400 mm Hfodpfx Abogzln Aj Ted Machine width: 750 mm Weight: 270 kg

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used Hfodpoq S Uwbofx Ab Tsd

Condition: new, Year of construction: 2022, Working width: 520 mm Planer block: Tersa Number of knives: 4 Hfodpoiuldyjfx Ab Tjd Planing table length: 2300 mm Planing stop angle adjustable: yes Planing table folding: pneumatic Maximum thickness throughput of thicknesser: 250 mm Thicknessing table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: articulated Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 g

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm Hjdpexdu Tqefx Ab Tjfd - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: new, Year of construction: 2023, functionality: fully functional, FPT INDUSTRIE GANTRY MILLING MACHINE TECHNICAL SPECIFICATIONS Hjdpsytpfnjfx Ab Tofd Brand: Fpt Industrie Model: Dinox 350 (IAT) Year: 2023 2-position PickUp Automatic millesimal head (2 segments) Tool changer CNC: Heidenhain PRICE AND FURTHER INFORMATION UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: new, Catalogue number S0232 - New machine, in stock - CE certificate - Shaft width: 410 mm - 4-knife shaft - Protected cutter head Ø 125 mm - Planer knives: 410x35x3 mm - Cutting depth: 8 mm - Speed: 4700 rpm Hedoymd Nhepfx Ab Tefd - Motor: 4.0 kW - Power supply: 3x400 V - Table length: 2650 mm - Infeed table length: 1500 mm - Outfeed table length: 1100 mm - Tilting fence 0°–45°, 1500x155 mm - Extraction port Ø 160 mm - Dimensions (L/W/H): 2650/900/1000 mm - Weight: 720 kg Net price: 21,000 PLN Net price: 4,900 EUR (based on 4.20 EUR exchange rate) (Prices may change due to currency fluctuations)

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm Hedpoytfgujfx Ab Tofd A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: good (used), Year of construction: 2011, functionality: fully functional, We are selling our Datron M8, year 2011. The machine is powered and ready for immediate use! Includes tools, vacuum clamping plate, pneumatic clamps, and programming software! 10-position tool magazine (incl. various tools and holders) HSK25 milling spindle, 50,000 rpm Includes Primcam programming software 2x pneumatic clamps Vacuum plate including vacuum pump Horizontal clamping device Hfsdpfsyti I Aox Ab Tjd Cooling with alcohol or air

Condition: good (used), Year of construction: 1989, functionality: fully functional, Sharpening machine for bandsaw blades Hfsdpfjydqguox Ab Tod

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw blade diameter: 1,600 mm, Sharpening Machine for Metal HSS Saw Blades. Technical Specifications: - Saw blade diameter: approx. 20 mm to 500 mm (other sources state capacities from 20–400 mm). - Saw blade thickness: maximum 6 mm. - Working speed: steplessly adjustable from approx. 40 to 140 strokes per minute. - Grinding wheel diameter: max. 200 mm. - Tooth count: electronically pre-selectable from 20 to 999 teeth. - Weight: depending on configuration, between approx. 900 kg and up to 1.2 t. Functions and Adjustment Options: The machine offers comprehensive machining options for different tooth geometries: - Supported tooth forms: Alternate top bevel tooth, high arc tooth, and flat arc tooth according to DIN 1840 (tooth forms A, B, BW, C). Hfsdpfx Ajyfumzob Tod - Automation: Automatic infeed of the grinding wheel and an automatic dressing device. - Grinding modes: Supports relief grinding, oscillating grinding, and cylindrical grinding. Control: - Equipped with an LED display and error notification panel for monitoring the grinding process. Drive: - Separate motors for the indexing mechanism and the grinding wheel. Space requirements: - The dimensions for used models are specified at approx. 1200 mm width.

Condition: good (used), Year of construction: 2021, functionality: fully functional, MillStep CNC Router PA8070V3, Year 2021, as well as PAX8050V2 – Year 2015 – 6 units in total available CNC Gantry Milling Machine MillStep PA8070V3 – fully equipped For sale are three CNC gantry milling machines MillStep PA8070V3 (custom size) in excellent condition. This machine is ideally suited for precise machining of aluminium, plastics, wood, and non-ferrous metals, as well as for prototyping and small batch production. Technical Details: Hfedoyrx Shjpfx Ab Tjd • Travel range: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Work area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails • Ball screws on all axes Equipment: • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency converter WJ200 • 3-axis control with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor • Robust steel base frame with chip drawers • Safety enclosure with protective doors The machines are fully functional, well maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Price: €5,900 net per unit (PA8070V3, year 2021) and €3,900 net per unit (PAX8050V2, year 2015) – 3 units of each model available – Inspections on site possible (machines are still in operation). Shipping: possible by arrangement

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1363, Vollmer gang saw sharpening machine Type Cana/HG No. 1363 Hfjdpfx Asyrtttjb Ted

Condition: good (used), functionality: fully functional, Vollmer automatic sharpening machine for crosscut and block bandsaw blades. Blade width from 70 - 360 mm. Blade thickness up to 3 mm. Tooth pitch 25 - 100 mm. Linear feed system. Grinding wheel diameter 250 mm. Equipped with heavy-duty, height-adjustable support and deflection stands. Hfsdpoyrq Unefx Ab Tjd

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Hfsdpfxewd N Dao Ab Tjd Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute