Used Planer Blades for sale (6,378)

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Tedpfjxliguex Aaqed Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Todpfx Aaju Au I Toqsd Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, Capacity: 80 m/min Tsdpfxjg S Dm Ns Aaqjd Planer feed table, tested. At speeds up to 80 m/min.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Tsdpfx Aael Dw Nxsqsd long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Tsdpfexlfwpjx Aaqed Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: Tjdpfei Apuhsx Aaqod - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tsdpfoxiv Ugsx Aaqsd Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools Tjdpfxswwk Rbj Aaqjd 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2010016, planing height: 200 mm, spindle diameter: 50 mm, number of spindles: 9, planing width: 300 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Min. planing width: 20 mm Max. planing width: 300 mm Min. planing height: 10 mm Max. planing height: 200 mm Min. feed speed: 6 m/min Max. feed speed: 36 m/min Feed speed: Automatic Number of spindles: 9 pcs. Spindle 1 Spindle type: Bottom Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 3 Spindle type: Left Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 4 Spindle type: Top Motor power: 15 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 5 Spindle type: Right Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 6 Spindle type: Left Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Spindle 8 Spindle type: Bottom Motor power: 15 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 9 Todpfxjxq Aqdj Aaqjd Spindle type: Universal Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes MACHINE DETAILS Dimensions & Weight Dimensions: 7100 x 2200 x 1900 mm Weight: 12,000 kg EQUIPMENT Tools Documentation CE marking

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2360 mm Dressing table adjustment: lever Gap removal indicator: scale Todpfxogqwx As Aaqsd Indication hollow - pointed joint: - Dressing fence angle adjustable: yes Motor power: 4,4 kW machine length: 2360 mm Machine width: 860mm Weight: 475 kg

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C Todpsvkit Asfx Aaqod table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: ready for operation (used), Rolling machine for band saw blades up to 270 mm width, both pressure rollers driven via internal intermediate gear, new E-motor, V-belt and switch Tjdelt Uvaopfx Aaqsd

Condition: new, Year of construction: 2024, New machine Tedpoxtgz Eefx Aaqed Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: excellent (used), Planer thicknesser 600 mm 2 knife shafts (wedge knife shaft) Planing width 610 mm, 2 feed speeds 7/12 m/min Planing height 200 mm 5 HP, weight approx. 1150 kg Joining guide, table length 2000 mm Tedpjv Hpvvofx Aaqsd Aigner auxiliary stop

Condition: excellent (used), Catalogue number 7693 TECHNICAL DATA - shaft width: 810mm - max workpiece thickness: 170mm - 4-knife cutterhead Tedpfx Aajwwr Hdoqed * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2021, Working width: 410 mm Tedpfx Aoxnhpgsaqod Planer shaft: Strip knives Number of knives: 4 Planer table length: 2360 mm Planer table adjustment: Lever Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 4.4 kW Machine length: 2360 mm Machine width: 860 mm Weight: 475 kg

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Shared motor with right spindle, with ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, chamfering unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electrical hood interlock: Yes Height adjustment of top spindle: electric with feed Feed brake system: Yes Feed speed steplessly adjustable up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan shaft Lubrication pump: automatic Max. jointing cutting depth: 10 mm Jointing cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle measurement display: digital readout Tsdsxr A Npepfx Aaqjd Infeed rollers before jointer: Yes Air cushion table: two-lane Central lubrication point: Yes Description: Jointer table with jointing fence 1.0 m, pneumatic pressure Infeed roller before jointer driven rollers in table Total connected load: 52 kW Location: supplier

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy. Tjdpfx Aaeh U Nvkjqsd

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Motor power: 3 kW / 4 HP Spindle speed: 5,000 rpm Spindle diameter: 120 mm Number of knives: 4 Feed speed: 8 + 14 m/min Maximum planing height: 230 mm Extraction port: Ø 150 mm Surface table: two-piece, foldable, synchronized on both sides Table height adjustment: via double universal joint shafts, handwheel with scale indicator Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Fence: tiltable, inclination with magnifying scale display Standard features: TERSA cutter block or alternative knife block, brake, undervoltage release Todpsxr R T Aefx Aaqsd Dimensions: 2,040 × 410 mm (surface tables) Weight: 560 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake Tedpfxowyulus Aaqod 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg Tsdpfx Aoqv Aivoaqsd ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: used, knife: WP Z36 flight circle (ø): 125 mm drilling: 50 mm Tsdpfx Aaexrdgioqsd length: 180 mm material: aluminum Labelling: MEC

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical specifications: Planing width: 510 mm Thicknessing height: 200 mm Total jointer table length: 2250 mm Thicknesser table length: 1000 mm Cutterblock speed: 5000 rpm 4-knife planing cutterblock Thickness feed: 7 + 14 m/min Drive motor: 5.5 kW Electric thicknesser table height adjustment Low-noise table lips Table roller guides Integrated, fixed extraction channel Dimensions: approx. 2,300 x 1,600 mm Weight: approx. 1,150 kg Todpfjxrhh Djx Aaqed Availability: by arrangement Location: Flörsheim

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Tjdpfolhrk Sjx Aaqed Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Tedpfsp Dupgox Aaqed Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)