Used Nexus 350 for sale (6,121)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 4,350 mm, total length: 8,000 mm, total width: 6,400 mm, volume flow: 35,000 m³/h, type of input current: three-phase, overall weight: 3,800 kg, working width: 3,500 mm, warranty duration: 12 months, workpiece weight (max.): 4,200 kg, inner dimension height: 3,500 mm, inner dimension length: 7,900 mm, load capacity: 4,200 kg, inner dimension width: 4,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 32 m², power: 22 kW (29.91 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 350 – Professional Spray Booth for Vans & Buses Large Format. High Airflow. Built for Commercial Vehicles. ⚡ Professional full downdraft spray booth for vans & buses ⚡ Designed for body shops specializing in commercial vehicles ⚡ Large working volume, stable airflow and optimized operating costs ⚡ Designed and delivered in full compliance with EU regulations 🔑 Key Advantages for Vans & Buses ✔ Large internal dimensions optimized for vans & buses ✔ Full downdraft airflow – consistent paint quality on large panels and roofs ✔ High-capacity DDF fans with VFD control ✔ Increased airflow for high cabins and long vehicle bodies ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive, multi-shift professional use 🌬️ Airflow Concept – Full Downdraft for Vans & Buses The Ventis Nexus 350 operates in a full downdraft configuration, specifically optimized for vans & buses. uniform airflow on roofs, sides and rear sections reduced dust contamination on large surfaces consistent, repeatable paint finish on vans & buses 🔧 Fans & Airflow Control – DDF + VFD Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Total installed fan power: 22 kW Airflow capacity: approx. 35,000 m³/h Benefits: stable airflow even with tall vehicles precise airflow regulation in painting and drying modes lower energy consumption compared to fixed-speed systems no belts or pulleys = reduced maintenance and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding commercial vehicle workshops 🔥 Heating System Integrated high-capacity heating system featuring a Riello RG5S burner (290 kW), providing: uniform warm air distribution throughout the entire booth stable curing conditions for large vehicle surfaces fast temperature build-up and reduced drying times, even with high air volumes 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application on vans & buses ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media Dsdpfx Ajx Tiwrsfnjcc High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed steel front doors – wide access for vans & buses Side technical service doors for maintenance and inspection Integrated LED lighting for bright, uniform illumination of large vehicles 📐 Dimensions & Technical Data Internal dimensions: approx. 8,000 × 5,000 × 3,500 mm Airflow capacity: approx. 35,000 m³/h Total fan power: 22 kW Heating capacity: Riello RG5S – 290 kW ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or paint mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty: 12 months ✔ EU-based technical support and service

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! +++ Note: Machine is part of an online auction! +++ Dcodpeyffxhefx Afnsc

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm Djdpfx Afsya Du Renecc - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 9100 kg Control Unit Brand MAZATROL Model Mazatrol Matrix Main Drive Spindle speed range 3300 Spindle motor power 30 kW Number of axis 3 Dodpfx Afjx D I Rionecc Workpiece Workpiece drm over bed 830 mm Turret Number of turrets 1 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Chip conveyor Tool presetter Autoblock chuck Toolholders User and maintenance manuals This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2006, Mazak Quick Turn Nexus 350m CNC Turning Centre with Mazatrol 640T Nexus CNC Control, Max Swing 750mm Diameter, Standard Machining Diameter 336mm, Max Machining Diameter 420mm, Bar Work Capacity 102mm, Spindle Speeds Max 4000rpm, 12 Tool Turret, Kitagawa Powered 3 Jaw Chuck, Tailstock, Filtermist FX4002 Oil Mist Extractor, Machine Weight 7500kg. S/No. 184642 (2006) Includes Various Tool Holders in Turret, Driven Tool Holders and Sleeves. Country of Origin: United Kingdom Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dcsdpfeyhdycex Afnoc

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Dodpfsx Dccyjx Afnjcc Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - Track width: 360mm - Shaft width: 350mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm From above: - Pawls - Toothed feed roller - Pawls - Smooth slip roller - Roller with saw blades - Pressure slip roller From below: Djdpfx Afjx Rq Efsnscc - 2 slip rollers before the worktable - Guide - Pawls - Track - Central automatic lubrication for track - Electric lifting of the saw blade shaft - Electric lifting of the main body - Infinitely variable feed speed adjustment - Feed motor approx. 2.5kW - Main motor 30kW - Overall dimensions (L/W/H): 2500x2300x1900mm - Weight approx. 4000kg ADVANTAGES – Czech production – 2 slip rollers in the worktable – Used multi-rip saw – Very good condition Net price: 34,900 PLN Net price: 8,300 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm Dsdpfx Afox Rc Tbenocc - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Manufacturer: Yamazaki Mazak Corporation Model: Nexus VCN-510C Machine type: Vertical CNC machining center Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Worktable: T-slot table, moving table Tool magazine: Automatic tool changer (ATC) Control cabinet: Yes Additional equipment: Lubrication system Weight: 7,100 kg Dcodpfx Ajyha Ivefnsc

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Type of fastening: laterally to the shelf upright surface: sendz. galvanized total length: 450 mm for shelf distance: approx. 350 mm profile dim.: U 62 x 30 mm Weight: 0,84 kg | pcs. Dedpfxji Euzds Afnecc

Condition: good (used), The scope of delivery includes: 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm Dedpfok T Au Ejx Afnscc total width: approx. 200 mm inside width: approx. 160 mm total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Dsdeichkcopfx Afnscc Max wysokość cięcia: 200 mm Max średnica piły: 300 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Króciec odciągowy: 2x220 mm Wyłącznik bezpieczeństwa Moc silnika wału górnego: 55 kW Moc silnika wału dolnego: 55 kW Zasilanie: 380 V Obroty silnika: 2800 obr./min Producent: A.Costa Wymiary całkowite: Długość: 2700 mm Szerokość: 2220 mm Wysokość: 1650 mm

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Dcsdpfx Asxn Svdsfnec Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Dsdpfx Afox S It Ajnscc Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. TBX-30 Vibrating Feeding Bunker CLK-110 Jaw Crusher TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher Dcedpsyhld Aofx Afnoc TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Condition: excellent (used), Keyence VL-350 optical coordinate measuring machine with control unit & software (plus VAT) For sale is a Keyence VL-350, a high-precision optical 3D coordinate measuring machine for industrial applications. Technical highlights: Manufacturer: Keyence Model: VL-350 Measuring principle: optical 3D scanning / coordinate measurement Advantages: Contactless measurement – no deformation of the workpiece High-resolution 3D data acquisition Fast measuring cycles Intuitive operation via included software Scope of delivery: Keyence VL-350 main unit Control unit CD with product software Accessories as shown in the pictures Dcedpfx Aexpt Rfsfnjc The device is in excellent condition (see photos). Fully functional and ready for immediate use. The stated price is exclusive of statutory VAT. An invoice with separately shown VAT will, of course, be issued. Shipping or collection by arrangement.

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Djdenqzkpepfx Afnocc Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW. Dedjnwm R Nopfx Afnocc

Year of construction: 2000, condition: used, Punching machine Noble Dedpfxsg Dgyxo Afnscc HM 35/350 BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Djdpom Rhdyefx Afnjcc

Condition: good (used), Tunnel passage width: 540 mm Tunnel passage height: 40 mm Quantity: 3 pieces Price/piece Dcodpfxehinmfj Afnoc

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Dcedpfx Afjxxu Spsnsc Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Dcjdpfxewfynfo Afnoc Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Dedpfx Asxpizaofnocc Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base dimensions: 5,000 x 5,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor surface: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard (P6 grade) - Load capacity: 350 kg - Colour: RAL colour of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring Dcjdpfx Afjxpic Rjnsc - Mounting materials PRICES: Version I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,863.50 net, plus shipping and VAT. Version II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €5,040.00 net, plus shipping and VAT. Version III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €7,033.95 net, plus shipping and VAT. Version IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €9,206.61 net, plus shipping and VAT. Version V: Base area: 100 m² | Dimensions: 10,000 x 20,000 mm | €8,916.48 net, plus shipping and VAT. Version VI: Base area: 150 m² | Dimensions: 5,000 x 5,000 mm | €13,075.20 net, plus shipping and VAT. Version VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €16,519.56 net, plus shipping and VAT. Version VIII: Base area: 300 m² | Dimensions: 5,000 x 5,000 mm | €24,309.81 net, plus shipping and VAT. Additional versions available Optional accessories - Guard rails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The extra charges will depend on the delivery location and scope of the shipment and can be provided by us upon request. PAYMENT TERMS Payment terms are agreed upon in the event of an order. All prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please contact us with any questions. Four wins – The cornerstones of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions.