Used Ctx 650 Ecoline for sale (6,025)

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Kedpfx Ajxdiarjgzsnf Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz - Fuses: 33 A Pneumatics - Compressed air connection: 6 bar

Condition: good (used), The scope of delivery includes: 01x compartment divider, used Material color: grey white total length: approx. 775 mm Kjdsi Eu Dvopfx Agzenf Length tube: 650 mm + 5 mm plastic cap cross section: square tube 20 x 20 mm opening dimension: approx. 103 mm Weight: 0,93 kg | pcs.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kodpevvkipofx Agzsnf

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg Knodpfx Aswa Aqljgzsf FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Long text as PDF attachment! Brief description: The machine has automatic height detection for the pass-through. It has 2 sanding discs at the top and 2 sanding discs at the bottom, each connected to a brush unit. Technical manufacturer's description: Knjdpfx Ajxyafksgzsf Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, lamellar brushes, and a double disc for more effective material removal, which improves adhesion for subsequent treatments. Q-Sand can be installed in a line or, thanks to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above machine on request! ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Knodpsr Ak S Nefx Agzjf Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C Kjdpfxokn Rz He Agzonf endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: new, 🧰 Product Features • Condition: new • Colour: grey • Volume: 650 l • Load capacity: 4000 kg (at 5°C ambient temperature) • Dead weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for rack storage, liquid-tight, drain valve optional Kedpfxjhvrk Ts Agzenf 💰 Price € 145,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by arrangement Constantly over 5000 linear meters of pallet racks from various manufacturers in stock (Subject to changes and errors in technical data, information and pricing as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Kedpfx Ajwhqprjgzsnf

Condition: used, CTX Toastmaster Z55 conveyorised pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control Kedjdmn D Uopfx Agzenf

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Knedov Epzvopfx Agzof Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Kjdpfx Agjlgz U Sszonf Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Knedewhqplspfx Agzef

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 19,000 h, Munch Pellet Mill with 2 only 200 hp motors (total 400 hp) electric controls and 60 hp centrifugal cooling fan also second 2011 model 650 pellet mill and 2 skids of new rolls and dies and spare parts. Second mill 2011 has no motors. It is working machine ready for use in case 2012 machine had problem. Kedpfx Aexc Nt Negzjnf

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Handover: in the current condition as seen -Pipe: See photos for damage -Manufacturer: Danfoss, refrigeration compressor cooling unit -Compressor: Type 2515 -Perfomance: -Voltage: 220V/50Hz -Dimensions: 650/425/H400 mm -Weight: 39.7 kg Knodpfx Aenymglsgzjf

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 3200 mm Measurements height 2700 mm Measurements depth 2500 mm Movement X-Axis Movement 700 mm Z-Axis Movement 450 mm Y-Axis Movement 550 mm Additional Equipment Oil Mist Extraction / Milling Spindle HSK 40 Fischer / Laser System / Infrared Measuring Probe / SW 3D Form Inspect / Handling System 84 × ITS 50 / 16 × ITS 148 / WINSTAT Connect Main Drive Number of axis 3 Spindle Speed 42000 RPM Spindle motor power 17 kW Tool taper HSK 40 Knjdpfxex D H Ugo Agzjf Table Table load 2000 kg Tools Slots in storage 72 This 5-axis OPS INGERSOLL 650 was manufactured in 2004, featuring a robust vertical machining center design. It boasts a travel distance of X: 700 mm, Y: 550 mm, Z: 450 mm, and a high spindle speed up to 42,000 rpm. The machine includes a 72-tool changer and supports a load capacity of 2000 kg. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL 650 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Knedpfsm Udfwox Agzjf Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Kedpfjq I Ty Rsx Agzjnf Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2011, operating hours: 5,498 h, load capacity: 4,000 kg, fuel type: electric, empty load weight: 4,000 kg, mileage: 5,498 km, This electric tow tractor from the Sill brand is from 2011 and is in good condition;Capacity is 4,000 kg;5,498 hours on the counter;Battery is from 2014 and is equipped with an external charger and automatic filling system;watch the video on YouTube Ksdpfxjv Nq Aco Agzsnf

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Kjdpfx Aswuudyogzsnf Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: good (used), Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum Knedpsb A I Nqofx Agzef -Weight: 42 kg

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Kjdpex D Sxqofx Agzsnf Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 1999, Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed Kodpfx Agjk Aa E Rozjnf frequency converter .. Please ask if needed Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet on a mobile base, stable design -3 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key Knsdperb E Ezjfx Agzef -Dimensions: WTH 650/660/H1200 mm -Weight: 82 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Kodpfsx D Rayex Agzonf Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding