Used Ctx 650 Ecoline for sale (3,099)

Year of construction: 2009, condition: ready for operation (used), A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible. Cedpfx Aoygmcqefnjpu

Condition: excellent (used), Steel bezel centre height 650 mm Clamping diameter 650 mm height from base 1190 mm ges. Height can be optionally reduced by 100 mm and the centre height can also be reduced by 100 mm by unscrewing an intermediate plate. Cpsdpfx Afjgzhbzenou further details, see picture

Condition: used, Headstock Spindle passage 38 mm Csdpfx Afocqb N Sjnspu Collet opening 38 mm Dimensions : L.650 x W.350 x H.450 mm

Condition: used, Year of construction: 2011, Machine no. 0-261-07-5174 Cpedpfx Afsygwczenju Joint Milling Unit 2 x 2.2 kW, 200 Hz Maximum chip removal stroke 3 mm Gluing Unit A12 Adhesive tank Processing of PU adhesive granules with standard applicator unit (PU interchangeable) Cutting Unit Bevel/Straight cut 2 x 0.35 kW, 200 Hz, 12,000 rpm Pre-Milling Unit 2 x 0.55 kW, 200 Hz, 12,000 rpm Maximum edge thickness 15 mm Workpiece thickness 8–60 mm Multi-Function Profile Milling Unit 2 motors at 0.4 kW each, 200 Hz, 12,000 rpm with HSK-25 tool holder Feed speed 14 m/min Minimum workpiece length 160 mm Workpiece thickness 12-60 mm Maximum edge thickness 3 mm Polishing Unit 2 motors at 0.18 kW each, individually suspended, inclined, and height adjustable – height adjustment of the upper motor via upper pressure 2 felt polishing discs, diameter 150 x 20 mm

Condition: used, Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, number of blades: 5, overall weight: 19,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, motor manufacturer: Cummins, motor model: Cummins B 6.7, Application area: waste wood and fresh wood, household and bulky waste, electronic scrap. Shafts with 7/7 discs, 5 cutters per disc. Breaker bar with comb. Robust hook lift frame. Axle with drawbar. Permanent overband magnet. Water spraying system. Magnet carrier hydraulically height-adjustable. Radio remote control. Cpsdjyghrtspfx Afnsu

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. • Tools: 30 pcs • Incl tools shown on the pictures Csdex U D Hqepfx Afnspu • Excl barfeeder

Condition: good (used), functionality: fully functional, Year of construction: 1999, 1 used WIRA conveyor belt smooth belt Length: 4.00 m Belt width: 650 mm Csdpfx Ajwlg Rajfnspu Belt drive motor: 1.5 kW - 1390 rpm, 6.4/3.7 A can be mounted either uphill or flat

Condition: like new (used), Year of construction: 2015, Lead and feed screw lathe Kern, operating hours: 3400 Turning length: 2000 mm Swing diameter: 650 mm Swing over cross slide: 420 mm Fixed steady rest Multifix tool holder size C Schunk three-jaw chuck, diameter: 315 mm Operating manual, Cedpjxwm Rbsfx Afnepu

Condition: excellent (used), Year of construction: 2008, operating hours: 1,386 h, Salmon Slicer Make: Marel Model: 650 Built 2008 Low running hours: 1386 Serviced and maintained Cpsdsycr Ecjpfx Afnju Very Good condition

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Cpsdpfx Asxzgkisfnsu Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia Cpedpfjxzi D Sex Afnou 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Tool measuring device Parts catcher Codpfxexzt Dcs Afnepu 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: excellent (used), Year of construction: 2018, Technical Data: This FICEP system allows steel profiles to be drilled and sawn to length in a single operation. Rolled profiles such as I-beams, T-beams, U-channels, angle steel, hollow sections, and flat steel can be processed. Sawing capacity: 650 mm Profile dimensions: 450 x 300 mm Working area: 15,000 mm Cpodpfjyfu Hbjx Afnju Max. workpiece length (output): 8,000 mm CNC control: FICEP Mitrol CNC with PEGASO software and DSTV data interface Saw blade: 6700 x 41 x 1.3 mm Double miter saw: 45° / 60° X-axis travel: 300 mm Number of drilling spindles: 3 pcs. Max. drilling diameter: 50 mm Tool changer: 6-position Milling and marking The seller assumes no liability for errors in writing or data transmission. The machine conforms to age-related condition in appearance, technology, and wear; used machines are sold without any warranty.

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Cpodpsyf I Hbsfx Afnou

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) Cpsdpfophlvisx Afnju DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Csdevdal Aspfx Afnjpu Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm Csdpfx Ajx S Rxnefnjpu number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Year of construction: 2024, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. Mixing compost, sand, substrate, etc. in a single operation during screening is easily possible. Suitable for screening topsoil, construction debris, and gravel. Backfilling of structures and trenches, etc. The unit can also be fitted for other grain sizes or shaft tasks—please inquire. The separator is currently on rental. Upon return, the separator is inspected in our workshop and comes with a 12-month warranty. Currently, an OQ45-5 is mounted, which is not included in the price. For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Cpedpfxoyfwfas Afnsu Leak oil connection required: 2 Series: TSE.103.491

Year of construction: 2022, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from reusable waste soil. Effective even with moist soil. Mixing in compost, sand, substrate, etc. is possible in a single pass during screening. Suitable for screening topsoil, construction waste, gravel. Ideal for backfilling structures and trench refilling, etc. Can also be adapted for other mesh sizes or shaft tasks upon request—please ask us for details. The separator comes from a buyback due to business closure. The separator has been inspected in our workshop and includes a 12-month warranty. Currently, an OQ45-5 is installed, which is not included in the price. Price: €1,750 Cpjdpfeyfwdvjx Afnju For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.283

Condition: excellent (used), Year of construction: 2024, lifting height: 18,000 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.310 kg Functional Lifting capacity: 250 kg Working height: 2.000 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 10500 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 6,68 x 2,34 m (LxH) Additional information Cpsdox Sx Nzjpfx Afnsu Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: Ecoline RS200 Year of build: 2024 Condition: New Data: Max. working height: 20,00 m Max. platform height: 18,00 m Max. reach: 10,5 m (120 kg basket load) Max. reach: 8,1 m (250 kg basket load) Dimensions: 6,68 x 2,34 m (LxH) Platform dimensions LxW: 1,30 x 0,70 m Max. basket load: 250 kg Swivel range: 360° Max. Inclination: 1° Max. hand force: 400 N Own weight: 3.310 kg Total permissible weight: 3.500 kg Driving license category: B Special features: on Mercedes Sprinter 351 CDI Information: TÜV and UVV new, new machine without registration

Condition: used, Year of construction: 2011, turning diameter 0700 mm turning length 800 mm control 840D Siemens turret head 12 swing over bed 380 mm spindle turning speed - stepless 10- 5000 rpm spindle bore 67 mm feed - longitudinal/cross 20000 mm/min rapid travel - longitudinal/face 30 m/min dimensions 5000 x 2800 x 2000 mm total power requirement 65 KVA weight of the machine ca. 7,5 t Machine has C-axe and 6 live tooling positions Csdpfx Aex Sy U Eefnepu

Condition: good (used), Year of construction: 1995, Centre Height: 330 mm Centre Distance: 2,000 mm Working Area: Max. Swing Diameter over Bed Cover: 650 mm Max. Swing Diameter over Cross Slide: 360 mm Main Spindle: Spindle Diameter at Front Bearing: 140 mm Spindle Bore: 107 mm Main Drive: 58.5 kW 2-step Speed Range: 4 – 750 rpm / 750 – 3,060 rpm Feed Drive: Rapid Traverse X/Z Axis: 10/10 m/min Tool Turret: Number of Tool Stations: 12 Of which Driven Tool Stations: 6 Tool Shank Holder: VDI 50 mm Dimensions / Weight: Footprint (L x W x H): approx. 6,400 x 2,150 x 2,000 mm Weight: 9,400 kg Accessories / Special Features: Cpjdpfx Afjx Sx Htjneu • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-station turret, VDI 50, including 6 driven tools in turret, brand SAUTER, DIN 5482 B 20x17, max. speed 3,000 rpm • Hydraulic 3-jaw chuck, Ø 315 mm, with various chuck jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • LTA make air extraction system • Various VDI 50 tool holders • CE compliant In 08 / 2025, the following parts were replaced by GILDEMEISTER service: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single regeneration module, 1 control insert for 1 axis, 1 control module for 2 axes of the inverter servo drive, 1 Simodrive power module for 1-axis motor. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2012, operating hours: 28,500 h, functionality: fully functional, machine/vehicle number: 1536580436A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: TNC620, workpiece weight (max.): 250 kg, rotational speed (max.): 10,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 15,000 h, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, We are offering this used DMG MORI DMU 50 ecoline universal machining centre, year of manufacture 2012. This is a 3+2 axis machine. Codpfx Afjyf Ihljnspu If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, Kunzmann WF 650 Year of manufacture: 2008 Power: 16 kW Control: Heidenhain Cpsdpfx Aeydv E Ajfneu Table dimensions: 1000 x 600 mm Max. workpiece weight: 400 kg Spindle taper: SK40 Max. tool weight: 7 kg Tool positions: 20 X travel: 650 mm Y travel: 500 mm Z travel: 450 mm Number of T-slots: 9 pcs. T-slot spacing: 63 mm Speed range: 5–6500 rpm Torque: 290 Nm Spindle renewed in 2025

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Cjdpfx Afsyg Hcdsnjpu