Used Ctx 650 Ecoline for sale (6,378)

Condition: excellent (used), Year of construction: 2004, CNC LATHE Manufacturer: DMG GILDEMEISTER, Model: CTX 320 linear V 6, Year: 2004, with Y-axis, with sub-spindle, turret, and C-axis. Djdpfx Asxvq Ubjh Uewd

Condition: used, mileage: 265,000 km, power: 478 kW (649.90 HP), first registration: 01/2022, empty load weight: 9,980 kg, maximum load weight: 16,020 kg, overall weight: 26,000 kg, tire size: -, axle configuration: 6x4, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: air conditioning, differential lock, navigation system, onboard computer, * Retarder * Lift axle * Aluminium rims * Air horns + long-range lights * Hydraulic system * Blind spot side camera * Parking air conditioning * Axle load indicators * Vertical exhaust * Differential lock * Fog lights * GPS * Fridge * Sleeper berth * Heated seat * Leather seats * Cruise control and speed limiter * Sunroof Lift axle Delivery time (in days): 1 Differential lock Bluetooth Air conditioning Air conditioning type: Automatic air conditioning Dwjdpfx Aoxvd H Roh Ujd Vertical exhaust Hydraulic system Central locking Fridge GPS Wind deflector On-board computer Power take-off (PTO) Cruise control Electrically heated mirrors Air suspension seat Heated seat Phone Sunroof Webasto (independent heater) Hydraulic retarder Engine brake Power: 650 HP DIN Power: 478 kW

Condition: used, Year of construction: 2011, x-travel 635 mm y-travel 510 mm z-travel 460 mm Control Heidenhain TNC 620 turning speed range 20 - 8.000 U/min number of tool places 20 Pos. tool taper SK 40 table surface area 790 x 560 mm spindle drive 13 kW Number of working hours ca. 3.870 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dwjdjxp R Egopfx Ah Ued Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2022, Milling machines Travel distance X: 1050 mm Travel distance Y :900 mm Travel distance Z: 600 mm Dedpfx Ajw D E Hkoh Uowd HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain spindle chuck: HSK63 spindle revolutions: 20000 rpm tool changer: 120 - time spindle cooling chip conveyor control Heidenhain Heidenhain control unit, type iTNC 530 Table load capacity: 3,000 kg Knoll chip conveyor Tool changer for 120 tools

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Dwsdpjxdlynefx Ah Ued Tool measuring arm Workarea light Coolant gun Internal coolant supply Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Weight kg: 7.800

Condition: good (used), Year of construction: 2011, CNC Milling and Turning Center Machine Type: DMG CTX beta 1250 TC Control: Siemens 840 D solutionsline + ShopTurn Year of Manufacture: 2011 Available from: February 2026 Dwedpjxvaqrefx Ah Usd TECHNICAL SPECIFICATIONS: Maximum turning length: 1,250 mm Turning diameter: 390 mm Bar capacity: 75 mm Main Spindle Speed range: 0 - 5,000 rpm Drive power: 34 / 25 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 250-91 mm Counter spindle: ISM 52 Speed range: 6,000 rpm Drive power: 27 / 20 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 200-66 mm CNC spindle swiveling for milling and turning operations B-axis: +/- 110° Speed range: 15 - 12,000 rpm Drive power: 22 kW Torque: 100 Nm Tool holder: HSK 63 Tool stations: 24 Y-axis: 100 +/- mm Machine weight: 8,000 kg Footprint (LxWxH): 5.67 x 2.72 x 2.1 m Features: Chip conveyor High-pressure pumps: 8/20/80 Paper band filter Coolant tank: 980 l Oil mist extraction Tool breakage control: Renishaw

Condition: new, Heidenhain IBV 650 Interface . 277236-71 SN:8533724 ,unused in original packaging, 100% functional, scope of delivery according to photos Dwsdpfx Ahji Eai Dj Uod

Condition: used, Year of construction: 2023, machine/vehicle number: 10000 295431, Workstation with JEDTEC magazine, vision inspection system with camera system for 6 sides, output station with TRAY magazine JEDTEC, air purification unit with filtration system. NOTE: The sorting system is as new and has not yet been used in production! Dedpfjxqih Asx Ah Uowd

Condition: used, Year of construction: 2011, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Siemens SlimLine Shopmill C-Axis 360 ° b-axis -5/+110 ° spindle tunring speed 8.000 U/min number of tool places 16 Pos. table surface area 630 x 500 mm spindle drive 13 kW Number of working hours ca. 30.900 h spindle hours ca. 300 h In our opinion, the machine is in good used condition Dwjdpfx Asxp R D Aeh Ued and can be inspected under power by appointment. The spindle has been overhauled - approximately 300 spindle hours Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW Dwodpfx Ajtk H N Toh Uod - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2400 mm Measurements depth 2000 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand FANUC Model 21i-MB Additional Equipment Dedpfxew H Txfj Ah Uowd Kraft & Bauer Fire extinguishing system, Type FB703S-UV3-TFM70°/KLA 6-S-MV / Knoll microfilter, Type Micro Pur 240 F / Streuli lifting station, Type SHSRT300-TL142/180 This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: good (used), Year of construction: 2011, CNC Turning and Milling Center Machine type: DMG CTX Beta 800 V3 Control: Siemens 840D Year of manufacture: 2011 TECHNICAL DATA: Dwodpfxoxvap Io Ah Usd Max. turning length: 800 mm Turning diameter: 380 mm Max. turning diameter over bed: 700 mm Spindle bore: 67 mm C-axis Main spindle: ISM 76 Spindle speed range: 0 - 5,000 rpm Drive power: 25 kW Number of turrets: 1 Tool positions: 12 Driven tools: 6 Tailstock Equipment features: Chip conveyor

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw Dwodpfsu Rl Ruox Ah Uod with frequency converter for variable speed no vibrating chute included

Year of construction: 2023, condition: used, machine/vehicle number: 10000 295434, Work station with JEDTEC magazine, vision inspection system with camera system for 6 sides, output station with TRAY magazine JEDTEC, air purification system with filter unit. NOTE: The sorting system is as new and has not yet been used in production! Dedpfx Ahsxqihvo Uewd

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW Dwedsvuugiepfx Ah Ued weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 2007, DOUBLE PACK – 2 DMG CTX 510 lathes Year of manufacture: 2007 + 2008 Three-jaw chuck with tailstock and steady rest support Emulsion machine, currently not in use Installed large steady rest can be purchased as an option 1 machine equipped with driven tools – without axis Dwodpfsxuuwkox Ah Usd Ex works Can be inspected under power – currently not in serial production, only used for sample parts

Condition: ready for operation (used), Year of construction: 2013, This 5-axis DMG MORI DMU 50 ecoline was manufactured in 2013. It features a high-speed spindle at 10,000 rpm, a 30-position tool magazine, and a tilting rotary table with B-axis and C-axis capabilities. Additional highlights include through-spindle cooling, a chip conveyor, and a 360-liter coolant tank with a high-pressure system. Consider the opportunity to buy this DMG MORI DMU 50 ecoline vertical machining centre. Contact us for more information about this machine. Djdexr Rxrspfx Ah Uowd Application Types Milling

Condition: used, machine/vehicle number: 5008733, Year of construction: 2016, operating hours: 10,565 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, load center: 500 mm, construction height: 2,880 mm, fork length: 1,200 mm, front tire size: 60 - 80%, rear tire size: 60 - 80%, overall weight: 6,112 kg, enginetype: Electric, manufacturer: Jungheinrich Dedpfx Ajxuxvwsh Ujwd

Condition: used, Year of construction: 2015, As good as new CTX Alpha 300 Only: 4,200 operating hours Accesories: fully equipped tool cabinet Dwsdpfx Ahexn Ur Us Usd (driven tools, jaws, holders, etc.) Control: Siemens 840D Ergoline Shop Turn Swing diameter over bed: 380 mm Swing diameter over face slide: 290 mm Travel: X-190 mm, Z-335 mm Y-axis: +-40 mm Spindle speed: max. 5,500 rpm spindle hole: 73mm tool turret: 12-speed drive tool holder: VDI30 Tailstock with quill: , Tool measurement: in the workroom C-axis: , Coolant system: , suction: ,

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Clamping force 650 t Clamping force up to 725 t Year 1996 Dedpfx Ajxvmmyeh Uswd Tie bar distance 102.5 x 92.5 cm Screw diameter 90 mm Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: used, Year of construction: 2000, material width 600 mm coil weight 5,0 t material thickness 0,5 - 5,0 mm coil internal diameter 360 - 660 mm coil external diameter 1500 mm no. of straightening rolls 9 straightening roll diameter 80 mm number of draw-in rolls 2 material cross-cut 1500 mm² material thickness at 600 mm material width 2,5 mm Dwsdpfevut S Rsx Ah Ujd material thickness at 300 mm material width 5,0 mm power requirement 15,0 kW weight of the feeder-straightener 2,5 t weight of the decoiler 1,6 t dimensions of the feeder-straightener 1,7 x 1,7 x 2,6 m dimensions of the decoiler 1,8 x 2,0 x 2,3 m Feeder-straightening machine VCRL 650, yom 1994, General overhaul 2001 with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, pneumatic intermittent lifting Decoiler SM 5000, yom 2000 with auxiliary drive, hydraulic expansion, hydraulic snubber roll. loop control via contact plate as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: Dedpsxpizgjfx Ah Uowd - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: as good as new (ex-display), Year of construction: 2025, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: - Distance between centers: 750 mm - Center height: 180 mm (250 mm optional) - Workpiece weight: 100 kg between centers, 250 kg between tips - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: MT 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90° - Tailstock: MT4, quill stroke 45 mm, cylindrical correction - Quill force: 200-600 N manual, (up to 2500 N adjustable option) - Table swivel: 12.5 degrees - Infeed spindle stroke: 80 mm - Rapid traverse: 50 mm - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW (5.5 kW optional) - Stepless speed adjustment of the grinding wheel via potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW Dwodpoiv Audofx Ah Ujd - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank capacity: 80 liters - Machine weight: net 3,500 kg - Infeed drive through DC motor - Air-cushion-assisted rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding point - Separate drives for spindles for external and internal grinding - Fully automatic work cycle, feed movement via rotary switch: rapid advance, rapid return, grinding operation, feed stop, fine feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece spindle head with continuously adjustable drive for live and lockable spindle - Digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for return stroke, infeed amounts, feeds, spark-out times, idle strokes; compatible with older Karstens infeed controls, with a color Siemens touchscreen panel - Scale in X and Z axes by HEIDENHAIN Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: as good as new (ex-display), Year of construction: 2025, Centre height: 181 mm Centre distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load between centres (cantilevered): 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0-4 m/min X-axis: Infeed spindle travel: 80 mm Dwjdpstqf Sqsfx Ah Usd Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive by DC motor Rapid feed rate: 48 mm/min/Ø Feed process: plunge grinding / longitudinal grinding 4 preselectable feed rates: mm/min/Ø 0.01–48 4 preselectable infeed amounts: mm 0.001–0.1 Spark-out time, oscillation grinding: 0–99 s / 0–99 strokes Tapping infeed: mm/Ø 0.001 Grinding spindle headstock: universal, swiveling: 0–180° Grinding wheel (external): D x b x d (mm) 500x100x127 or 203.2 Grinding wheel (face - option): D (mm) 250x32x76.2 Grinding wheel (internal - option): D (mm) (2–250) Drive power, external/face: kW 5.5 (7.5) Drive power, internal: kW 2.2 Peripheral speed, external: m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Stepless variable drive: Mk 4, 1/mm 30–270 / 50–450 Workpiece spindle fixable Spindle bore: MK 4/24 mm Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivel on rotary part: 0–90° Tailstock: Quill mounting / quill diameter: MK 4 / 75 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40 µm Connections: Total connected load (machine): 6.5–10 kW Grinding spindle headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 L Pneumatics: 6 bar Comparable machines: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: refurbished (used), Year of construction: 1988, Karstens K11 650 The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been tested and is in excellent condition. As we specialize in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical data: - Distance between centers: 650 mm - Center height: 180 mm - Workpiece weight: 100 kg (between centers), 250 kg (supported between centers) - Grinding wheel diameter: 400 mm - Workpiece spindle: MK 4, infinitely variable speed 30-450 rpm, swivel range 0 - 90° - Tailstock: MK 4, quill stroke 45 mm, fine adjustment with micrometer - Quill force: 200-600 N, hydraulically operated via foot pedal - Table swivel: 10° - Infeed spindle travel: 80 mm - Rapid traverse distance: 50 mm - Coarse adjustment with air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW Dwedpfoh Rixxex Ah Usd - Workpiece spindle motor: 0.55 kW - Machine weight: net 3800 kg - Infeed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding position. - Separate drive for the spindles for external and internal grinding. - Fully automatic operation: infeed movement via cam switch: rapid advance, rapid return, grinding operation, infeed stop, μm infeed. - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece spindle head with steplessly adjustable drive for both rotating and clamped spindle operations. - Infeed control for plunge and traverse grinding, settings for retraction, infeed amounts, feed rates, spark-out times, empty strokes - Paper band filter unit approx. 250 L - Comparable to Weiss / EMAG / GP-cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat