5 axis universal machining center

DMG MORI DMU 50 ecoline

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Rjdpfxoyzzpve Ap Iow Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Redpfxsxtxk Se Ap Isw Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Rodpfx Aow Tir Usp Ijw Machine runs smoothly Travel distances X 635 Y 510 Z 460 Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Rsdpfx Aewyv Nzep Isw Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Reach: 4 m Height: 4,61 m Rodpfjxykvmsx Ap Ijw

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Rjdpfx Aexf E Twep Isw Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Redpfxjpgmrye Ap Isw Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Year of construction: 2013, condition: used, overall weight: 15,500 kg, total length: 4,000 mm, total width: 2,250 mm, total height: 2,810 mm, spindle motor power: 29,000 W, ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure Weight approx.: 15,500 kg Travel Z-axis: 600 - mm 5-axis machining: Yes Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Spindle performance: 29 kW Movement A-axis: 0 - 140 ° Rjdpfx Ajy Th U Nsp Ijw Spindle speed: 12000 - rpm NC rotary table: Yes Travel Y-axis: 800 - mm Number of tool locations: 33 Control: Heidenhain iTNC 530 Movement C-axis: 360 - ° Dimensions of the clamping surface: 800 x 630 mm Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: new, Year of construction: 2021, functionality: fully functional, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 Redpfx Apjwx Nkco Ijw 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Machine weight 9500 KG

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: Rsdpfx Asulnbkjp Iow - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)