Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
7
5-axes simultaneous Travel 710x520x520mm Table size 700x500mm Spindle retainer SK40 Spindle speed-12000 R/min Electronic Handwheel Tool changer 24 pos Control: HEIDENHAIN 426 Gourfaf more
4
x-way 750 mm y-way 600 mm Z-way 520 mm c-axis +/- 360 ° b-axis 180 ° Max. spindle speed: 18000 rpm Ct2qovo3 Tool holder HSK-A63 Number of tools in the magazine 32 pieces Clamping surface axis of rotation 700 x 500 mm permissible load NC rotary table with swivel axis 350 kg The machine is in very good condition and is equipped as follows: INNER COOLANT SUPPLY with 40 bar, 3D probe, electronic handwheel, etc. more
4
Manufacturer DMG, model DMU 70 eVolution, built in 2000, 5-axis, control HEIDENHAIN, work area (x - y - z) 750 x 600 x 520 mm, C-axis: +/-360 degree B-axis 180 degrees, spindle hours approx. 1,000 hours (spindle was replaced); Spindle speed 18,000 rpm Max.; Additional equipment: 60 tool locations (HSK 63), 3-D-probe, chip conveyor, IKZ - indoor air, Hiesfjlee more
5
x-travel:735 mm y-travel:650 mm z-travel:560 mm rotary table dia.:650 mm table surface area:800 x 650 mm 07e0slgr control:HEIDENHAIN iTNC 530 table load capacity:600 kg spindle turning speed - stepless:18000 1/min spindle taper ISO:SK 40 tool change unit:30 Pos. total power requirement:46 kVA weight of the machine ca.:9,8 t dimensions of the machine ca.:4,0 x 2,2 x 3.0 m 5-axis simultaneously machining center, NC-rotary-swivelling-table, A-axis +-120°, C-axis 360°, hydr. clamping of swivelli... more
6

milling machining centers - universal QUASER MV204CU

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2005
used
x-travel 700 mm y-travel 660 mm z-travel 480 mm Control Heidenhain iTNC 530 spindle turning speed range 15000 U/min spindle taper SK 40 Bcsadcmlif tool piece magazine with 48 weight of the machine ca. 10 t more
5
NC machining centers, milling machine, machining center -sold as spare parts Qlc02m0sh Control SECO table size 1150 x 500 mm X 700 mm Y travel 400 mm Z 450 mm-Drehzahlen 38-4000 RPM Recording SK 40 tool changer 25 seats manual masterbar 2300/2200/H2800 mm Weight ca. 4500 kg more
5

Machining Center - Universal DOOSAN VC 630 5ax

Ispringen, GermanyGermany dealership location
6621 km
2012
used
x-travel:650 mm y-travel:765 mm z-travel:520 mm control:Heidenhain turning speeds:20000 1/min spindle drive:28 / 24 kW Torque of milling spindle:90 Nm Feed x/y/z:18 m/min rapid travel x/y/z:40/40/36 m/min :-120.000 +30.000 x 0,001 ° c-axis:360.000 x 0,001 ° distance spindle nose and table:210 - 730 mm table diameter:630 mm workpiece height max.:500 mm max. workpiece diameter:730 mm workpiece weight:500 kg speed of turning table:11 1/min tool magazin::40 BT max. tool diameter:80 mm max. tool-di... more
8
Universal lathe X/Y/Z : 750/600/520 Hjr0r2zma rpm : 20 to 18,000 tools revolver : 60 tools including NC rotary table with coolant : 700*500mm infrared and laser tool tester more
3

Machining Center - Universal AUERBACH FUW 725

Dreieich, GermanyGermany dealership location
6568 km
1992
used
x-travel 725 mm y-travel 525 mm z-travel 505 mm table-size 1000 x 500 mm table load capacity 500 kp spindle taper ISO 40 By8o7avd quill stroke 80 mm spindle turning speed range 25 - 5000 U/min voltage 380 V tool changer made by: Kelch 20-fach CNC-control PHILIPS 3460 total power requirement 10 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,60 x 3,80 x 2,35 m more
5
x-travel:885 mm y-travel:600 mm z-travel:600 mm table surface area:D 750 mm control:iTNC 530 HEIDENHAIN SMART NC turning speeds:28000 1/min tool change unit:30 Pos. tool taper:HSK A 63 rapid traverse:90 m/min table load:800 kg spindle:55 / 43,5 kW total power requirement:73 kVA weight of the machine ca.:10,2 t dimensions of the machine ca.:4,6 x 2,5 x 3 m M3lgt 5-axis machining center with controlled head -10 to +110° 3D-touch probe M&H 25.10,, internal coolant supply 40bar, 900l, BLUM Laser... more


Centers (u...
daily

New machines via email!

Stay updated!
6
1 gebr. CNC machining center-5 axis Brand: HURON model: KX3X8 Year of constr.: 2015 CNC control: HEIDENHAIN iTNC 530 Procedures: X 700 mm Y: 500 mm W: 500 mm 8m2r0ea Table size: Drms. 500 mm Tool changers: 40 x Speed: 50-16,000 rpm Tool holder HSK 63 Chip conveyor: Yes Internal coolant supply: 40 bar -miscellaneous / equipment -Probe BLUM TC 62 - BLUM laser micro compac -Tool measurement ect... ... more
3
1 x used CNC machining center Manufacturer: BMC Type: 30M Year of construction: 1995 s/n: BM950504 Weight: 3.8 to. Technical data: Traverse paths x y z in mm: x 772 mm y 462 mm z 616 mm 4th axis with 200 mm feed Banqnr7x0e good condition Documentation missing Terms of delivery: free loaded terms of payment: prior to pick-up more
3
x-travel:762 mm y-travel:508 mm z-travel:508 mm control:Haas turning speeds:12000 1/min spindle drive:22,4 kW Torque of milling spindle:122 Nm Feed x/y/z:16,5 m/min rapid travel x/y/z:30,5 m/min :+110.000 -35.000 x 0,001 ° c-axis:360.000 x 0,001 ° distance spindle nose and table:102 - 610 mm Table dimensions:630 x 500 mm workpiece weight:300 kg speed of turning table:8,3 1/min tool magazin::40*1 DIN max. tool diameter:76 mm max. tool-dia with free toolbox:127 mm max. tool weight:5,4 kg total p... more
6
x-travel 760 mm y-travel 460 mm z-travel 560 mm Control b-axis ° A-axis milling-head swivable +/- NC Tool changer bar loader Cooling through the spindle 40 bar coolant chip conveyor Control Siemens type 840 D total power requirement kW weight of the machine ca. t 3khtgec0q dimensions of the machine ca. m more
6

5-axis Machining Centre MCM Clock 700

Kuringen, BelgiumBelgium dealership location
6308 km
2000
good (used)
MCM 5-axis machining cell Consisting of two machines with FMS pallet cell Type:Clock 700 Year:2000 Control:NUM Pallets:500x500mm Pallet: Horizontal/Vertical NC Table: +135 / -45 degrees Travel XYZ:700x710x850mm Pallet changer: 24atc Toolchanger: 2 x 148 atc Max.spindle speed:8000rpm Spindle motor:25kW Spindle taper:ISO50 Heavily reduced price:64 000 EURO dismantled and loaded to trucks for the package of two machines with FMS system With good tooling package and spare parts ... more
8
3-axis CNC machining centre Fanuc Robodrill-T21i FL CNC Fanuc x 700 mm y: 400 mm w: 330 mm Spindle: 11 kW Tool holder BBT 30 (big plus) RPM 150-24,000 rpm. Tool magazine with 21 stations Tool diameter of 80 mm Tool length of 210 mm Tool weight of 2 kg Rapid traverse 54 m / min Feed 30 m / min Weight: 2200 kg Accessories: * 24000 spindle * with Renishaw * Measurement of workpiece and tool measurement length * Construction of C-axis * C axis * Hours (20.06.2018: 4822) 8z38q... more
4

5-axis machining center DMG DMU 70

Schnaitsee, GermanyGermany
6908 km
2010
excellent (used)
Used 5 axis machining center DMG DMU 70 (3 + 2) Year of manufacture 2010 Control Heudenhain iTNC 530 Handwheel HEIDENHAIN HR 410 Juzq0i Procedures: X 750 mm Y 600 mm Z 520 mm CNC rotary table 840 mm x 620 mm Spindle 20-10,000 rpm. 30ig professional tool changer SK 40 interface chip conveyor Rinse-gun cab roof IKZ (internal coolant supply) Machine is in very good condition more
6
1 x used vertical machining center Manufacturer: HAAS Type: VF-2DHE Year of construction: 2001 s/n: 25362 Weight: 4.9 to. Technical data: Traverse paths: x 762 mm - y 406 mm - z 508 mm Table load: to 1.36. Hibg3cby3 Distance between nose and table: at least 102 mm / max 610 mm BT40 Spindle diameter. Speed.: 8.000 rpm Feeds: 1 5000 mm / min. Terms of delivery: free loaded terms of payment: prior to pick-up more
7

Universal Millingmachine 5 Axis 3+2 DMG DMU 70

Charlottenstrasse 6, 89547 Gerstetten, DEGermany
6723 km
2007
excellent (used)
Travels X / Y / Z 750mm x 600mm x 520mm Control Siemens 840 D Solution Line with shop-mill Spindle SK 40 with 10 000 rpm Nb0mh Spindle New (DMG) March 2018 chip conveyor Swivel rotary table with digital drives Swivel range -10 ° to + 95 ° with electronic angle display and plane transformation Clamping surface 800 mm x 620 mm Tool magazine with 30 places chain Direct position measuring system X / Y / Z Operating mode 4 more
6
x-travel 700 mm y-travel 600 mm z-travel 600 mm table surface area 630 mm 360 Grad angle of table min./max. 45/20 Grad turning speeds 6300 U/min Cunp3j2 control Pfilips type CNC 432 Tool changer spindle taper ISO 40 chip conveyor total power requirement 27 KVA weight of the machine ca. 5,8 t dimensions of the machine ca. 4,1x2,3x2,4 m more
5
Nerr7 Vertical 5-Axis Machining Centre. DMU 70 eVo linear New Design. Year of manufacture 2011. Heidenhain iTNC 530 CNC. 2-Axis NC-swivelling rotary table 700 x 500 mm. C-Axis rotation 360° / 0.001°. B-Axis swivelling 102° / 0.001°. Spindle drive motor 35/25 KW. Spindle speeds 20 - 18000 rpm. 60 station tool magazine. Tool taper HSK-A63. Renishaw probing. Laser-tool measurement. Chip conveyor. Steady/Tailstock for NC rotary table, center height 160 mm. Electric handwheel. NC4 ... more
4

CNC machining centre 5 axis DMG DMU70V

Nürtingen, GermanyGermany dealership location
6677 km
1998
good (used)
CNC machining centre 5-axis universal Manufacturer: DMG Type: DMU70V Ndijt Year of construction: 1998 CNC control: Millplus HEIDENHAIN Traverse paths: X/Y/Z = 710 x 520 x 520 mm Automatic rotary table Tool changer: 60-fach Round table: D = 700 mm Tool holder: SK40 Speed: 20-12,000 rpm Weight: 7.500 kg more
6
5-axis machining centre used by DMG DMG DMU 75 monoBlock Year 2013 Control HEIDENHAIN of iTNC 530 HSCI Handwheel HEIDENHAIN HR 410 Procedures: Ss3g8k X 750 mm Y 650 mm Z 560 mm CNC rotary table diameter 650 mm integrated into 1000 x 650 mm 60ig professional tool changer SK 40 interface IKZ 40 bar Infrared probe Chip conveyor 3 D quick set 600 liter coolant tank with paper band filter Rinse-gun Machine is in excellent condition. Machine is available. more
5
1 x used vertical machining center Manufacturer: Hitachi Seiki Type: VK45 II Year of construction: 1997 s/n: 47351 Weight: 6.9 to. Technical data: Control: SEICOS mill docu Traverse paths: x 760 mm - y 500 mm - z 500 mm ISO 50 Table: 480 x 1,120 mm Ba7jaoxhhi Spindle maximum 8,000 to Terms of delivery: free loaded terms of payment: prior to pick-up more
5

Universal Millingmachine 3+2 Axes DMG-Mori DMU 70 Eco-Mill

Gerstetten, GermanyGermany dealership location
6723 km
2015
good (used)
272/5000 Ba9awuosse Travels X / Y / Z 750 mm x 600 mm x 520 mm Control Heidenhain TNC 620 Milling spindle SK 40 with 12 000 rpm 32-fold tool changer Nc swivel rotary table - 10 to +95 ° elec. handwheel Blum laser Infrared probe Renishaw OMP 40 Production package IKZ, chip conveyor Instaled 2016 more
6

CNC GROOVES SYNCRONFRAESMASCHINE WERA PROFILATOR V 160-R

Kitzingen, GermanyGermany dealership location
6676 km
2009
excellent (used)
Grooves and syncronfraesmaschine in gear machining Sinumerik 840 d microprocessor CNC control 2009 X = 815 mm Z = 400 mm Tool speed = 3000 / min Screw tightening torque UTS Spanner(UTS 50-Krupp Widia) = 40 nm C0meah2y Path resolution at the CNC = 0.001 mm Rapid traverse speed, X, and z = up to 60 m / min Swivel angle B1 = max 15 ° Weight = 7500 kg Super condition more
6

CNC universal tool milling machine MAHO MH 700 S

More Maho Mh 700
Schwäbisch Gmünd, GermanyGermany
6701 km
1990
ready for operation (used)
CNC universal tool milling machine MAHO MH 700 S Year of construction 1990 Bcaeuvjw8w CNC control PHILIPS 432 x-way 700 mm y-way 600 mm z-way 600 mm Table surface 630 mm Turntable 360 degrees Swivel table angle min./max. 45/20 degrees Speed 6300 rpm tool changer Swivel milling head horizontal / vertical Spindle mount ISO 40 chip conveyor Total power requirement 27 KVA Machine weight approx. 5.8 t Space required approx. 4,1x2,3x2,4 m more
10

cnc turning and milling centre Mori Seiki NT4250DCG 1500/SZ

Nassenackerstraße 5, 76476 Bischweier, DEGermany
6598 km
2007
excellent (used)
Clamping device Kitagawa Double footswitch with protecting cap for main and sub spindle Ndctn Tool shank execution CAPTO C6 for turning-milling spindle Chain-type tool magazine with 40 spots Increasing oft the possible Indexing B-axis to 0,0001 I/F for high pressure coolant system 70 bar standards in X 1, Z1, Y1, B, X 2, Z2 Compressed air exhaust system for Chuck (main spindle) and tool cutting (turning-milling spindle) Knoll high-pressure system 70 bar with 2 high pressure pumps tran... more
4
Traverse paths x 800 mm Y 550 mm Z 500 mm. Control dialog 11. Work table size of 1100 mm x 550 mm. Spindle retainer for SK 40 DIN 69871. maximum output spindle drive 6 KW. Spindle speed 0 - 5000 min-1. 2 speed gearbox / automatic switching. Tool magazine with 30 stations. Coolant system about 230 litres. Dimensions approximately L 3.3 metres B 2.9 m H 2.4 meters. Bb8d0ea3rf Weight approx. 5000 kg. Power consumption 21 kVA. more
9
CNC universal milling machine MAHO MH 660E. The machine has been running 38.333 hours. Transport size approx. 2 m x 2 m x 2 m with a weight of approx. 2,5T. An advantage of which is that no ground fixing is necessary. The work piece table has a size of 50x75cm. Through the retractable barriers, but has the possibility to impose much larger workpieces. The machine was dismantled and stored. A tour (in 37688 Beverungen) is possible by arrangement. C0nfyqh more
5
Universal machining center Hermle U 740 year 2007 HEIDENHAIN control Bauyecsypt more
9
Working travel 710x520x520mm Table: Swivelling 0-180° / rotating 360° Table size 700x500mm Spindle taper SK40 Spindle speeds 20-12000 rpm Tool changer 60x Gchbxrcmi HEIDENHAIN Mill Plus 5 axes MARCELS MASCHINEN CH more
5

Universal machining center Wemas VCE 630

Walluf, GermanyGermany dealership location
6533 km
2007
used
5-axis machining center manufacturer: Wemas VCE 630 Control: HEIDENHAIN TNC 530 Year of manufacture: 2007 TECHNICAL data: X-axis: [mm] 700 Y-axis: [mm] 820 Z-axis: [mm] 550 C-axis: 360° Swivel axis A: +30°-120° Speed range: 20-12000 [1/min] Power: [kW] 32/48 Torque: [NM] 130/200 Tool holder: HSK-A 63 Tool places: 64 NC swivel rotary table table size: [mm] Ø 800 Bbf0xvfqjx Maximum table load: [kg] 850 AUSTTATUNGSMERKMALE: chip conveyor more
4

Milling Center Maho MH 700S

More Maho Mh 700
Heilbronn, GermanyGermany dealership location
6641 km
1990
used
L.-Nr. 5.3-581 1 gebr. CNC Univ.-Werkzeugfraesmaschine Fabr. MAHO Modell MH 700S,Bj. 1989 1 used CNC Universal Tool Room Milling Machine MAHO Type MH 700S, built 1989 CNC Steuerung CNC 432 starrer Scwenkkopf CNC control CNC 432 fixed table Ba3atkzmdv coolant device Werkzeugwechsler Automatic rotatable head Technische Daten / technical details: X-Weg laengs / X-travel longitudinal 700 mm Y-Weg senkrecht / Y-travel vertical 500 m... more
3

CNC machining center Deckel Maho DMC 60T RS3

Riederich, GermanyGermany dealership location
6677 km
2008
used
Universal machining centre Deckel Maho DMC-60 T-RS3 5-axis machine with SK40 control: mill plus IT Spindle speed: 18,000 rpm Travel 780 x 560 x 560 8yzt3l3sf -Pallet changer with a total of 5 pallets (630 x 500) -Chain magazine with 80 Tools - automatic tool breakage detection IKZ 80 bar more
6

BAZ Doosan Mynx NM410

Düsseldorf, GermanyGermany dealership location
6395 km
2006
used
1 x Doosan Infracore BAZ Mynx NM410, year 2006 On-time control: 17,000 hours of machine structural steel was edited mainly 1-ply. The BAZ is currently not on the river. Tzgebcfyn More information were not below the runtime of control, unfortunately in the database. Problems/errors are not known. more
6
Technical data: Control: Phillips CNC 532 X-axis (longitudinal): 700 mm Y-axis (cross): 500 mm Z axis (vertical): 600 mm Spindle taper: ISO 40 Spindle speed: 20 6,300 RPM. Feed: 4,000 mm / min. Rapid traverse rate: 10,000 mm / min. Equipment and accessories: -Swivel milling head swiveling vertical and horizontal automatically (programmable) -Internal coolant supply with high pressure pump -Automatic tool changer for 60 horizontal and vertical tools -Splash Guard cabin -Conveyors... more
6

Universal machining center QUASER MV 204 CU / 15

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
2006
used
HEIDENHAIN iTNC-530 Working travels 700x590x430mm A-axis table swivelling 220° ( +/- 110°) C-axis table rotating 360° Table diameter 280mm Spindle speeds -15000 rpm Spindle taper 40 Big Plus 2d3suc3nk Tool changer 48x Coolant through spindle MARCELS MASCHINEN CH more
5
MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. 7atwp7nzl Tool breakage control. etc... Low run hours - Superb condition. more
5

3-axis CNC machining centre Deckel Maho DMC 70 V

Kaufungen, GermanyGermany dealership location
6567 km
1998
used
Control: HEIDENHAIN TNC 426 Working area: X 700 mm, Y 550 mm, Z 500 mm 2qyn2e Table length: 900 x 550 mm Tool changer: 30-fach Tool holder head: SK 40, 8,000 rpm Space requirements: 5200 x 3300 x 2910 mm Maximum table load (kg): maximum 800 Machine weight: 7000 kg Pallet changer (kg): 1200 -Conveyors -Direct position measuring system -Rinse-gun -Handwheel Starting 1999 more
3

CNC machining center DECKEL MAHO DMU 70 eVolution

Riederich, GermanyGermany dealership location
6677 km
2001
used
CNC vertical machining centre DECKEL MAHO DMU 70 eVolution Control: Mill plus Year of construction: 2001 5-axis simultaneous machining Traverse paths: X axis: 750 Y axis: 600 Z axis: 520 Ba0f7zjyoz Speed range: 0-12000 RPM (SK 40) With the following accessories: -NC swivel rotary table 700 mm x 500 mm clamping surface -Vertical tool changer with 32 magazine places (SK 40) -Electronic hand wheel - tool measurement more
3

Universal Machining Center MAHO MH 700 S

More Maho Mh 700
Gorxheimertal, GermanyGermany dealership location
6594 km
1992
used
Universal Milling Machine / Machining Center Qxdzzbzt MAHO 700 S 1992 CNC 532 700 x 600 x 500 60-station Toolchanger, 2-station Palet Changer Internal Cooling more
6

5-AXIS-MACHINING CENTRE CHIRON FZ 15 FX Magnum Highspeed

Markgröningen, GermanyGermany dealership location
6648 km
2012
used
Project No.: 904591 Kind of machine: Machining Centres and Milling Machines (universal) Amount: 1 Manufacturer: CHIRON Type: FZ 15 FX Magnum Highspeed Control: Heidenhain iTNC 530 Year of Manufacture: 2012 Approx. no. of shifts: 1 Location: Germany Machine under power: yes Availability: on short call Delivery terms: EXW (at machine location) acc. to Incoterms 2010 Limitation of liability of defects: no Description: - Option for Control: Kinematik Opt Cycle 450 - Extended swivel range of table... more
6

Universal machining center DMG DMU70V

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
1999
used
5 axis Working travels 710x520x520mm Table size 700x500mm M0ajx Swivelling 0-180° Rotating 360° Spindle taper 40 Spindle speeds -12000 rpm Tool changer 24 pos Control: HEIDENHAIN Mill Plus MARCELS MASCHINEN CH more
2
- With 6-fold plate changer Ig2y9stb - SK 50/80 Tools - Chip conveyor cross belt conveyor manufacturer Knoll - Tapping Function - Machine tools including - Travel X = 710, Y = 650, Z = 650 mm - Masch No. 96719th. - Year 1991 Place: D-72488 Sigmaringen Visits by appointment gladly possible! Besichtigung nach Terminvereinbarung gerne moeglich! Delivery from the factory more
5

5-axis machining center DMG DMU 70 3+2

Schnaitsee, GermanyGermany dealership location
6908 km
2008
excellent (used)
5-axis machining centre used by DMG DMG DMU 70 3 + 2 HEIDENHAIN iTNC 530 Handwheel HEIDENHAIN HR 410 X 750 mm Y 600 mm Z 520 mm NC rotary table 840 mm x 620 mm Spindle 20-14,000 rpm. 30ig professional tool changer SK 40 interface Infrared touch probe Bbjrydhgvc Baldwin laser Chip conveyor Rinse-gun Machine is in very good condition. more
6

5-AXIS-MACHINING CENTRE DECKEL MAHO DMC 60 T

Markgröningen, GermanyGermany dealership location
6648 km
2004
used
Project No.: 904576 Kind of machine: Machining Centres and Milling Machines (universal) Amount: 1 Manufacturer: DECKEL MAHO Type: DMC 60 T Vr9vji Control: Heidenhain Mill Plus Year of Manufacture: 2004 On power approx.: 15.300 h Spindle hours approx.: 13.900 h Availability: likely in February Delivery terms: EXW (at machine location) acc. to Incoterms 2010 Limitation of liability of defects: no Description: Machine incl. pallet buffer for 30 pallets (each up to 320x320 mm), max. 100 kg handl... more


Centers (u...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close