Number of sanding units 4 St.
sanding width 200 mm
Sanding height max. 150 mm
Dimensions (L/W/H) 2000x1200x2100 mm
weight 650 kg
LÖWER - Double-Sided Finish Machine CrossMaster DDx2-200
for finish grinding and intermediate grinding of strips and
Bars of all kinds with easy processing from above and below.
- 2 disc grinding lamella units each from above and below, D = 180mm, 0.75 kW,
- stepless speed control of the disc units
from 200-600 rpm via frequency converter
- staggered arrangemen...
Polishing and finish sanding automat Löwer
type: FA4S
Fxas3fdvo
for four side sanding or all window parts
width of the workpiece 220 mm
height of the workpiece 100 mm
frame size 3000 x 3000 mm
brush motor 0,37 kW
infeed motor 0,12 kW
infeed speed 8 m/min.
area sanding by sanding lamellas and sanding pads.
Fold sanding by sanding lamellas.
size: Length 5 m x width 1,85 m x height 1,6 m
weight: 550 kg
table diameter 200 mm
Vt7viy
workpiece height 200 mm
number of wheels 1
total power requirement 2 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 1x1x1,5 m
CATALOG NUMBER 4910
TECHNICAL DATA
max. width of the workpiece 200mm
max. height of the workpiece 150mm
2 grinding aggregates:
upper and lower + cleaning brushes - the possibility of applying brushes for aging the wood
* in advance:
2 sliding pressure roller +
rubber belt pulling +
grinding unit 2 metal rollers + shoe +
pressure roller +
cleaning brush +
pressure roller + cleaning element +
* from down:
leading edge +
towing tape +
grinding unit 2 metal rollers + shoe +
towing tape +
cleaning b...
AUTOMATIC BRUSHING machine ITALMECCANICA POLYWOOD 3TA/1600
second hand machine
for mixed production runs - frames - blinds - large doors - panels
CE mark : Yes
max. working width mm. 1600
max. working heigth mm. 130
Iekdqdj
min. working length mm. 400
composition :
n.02 verical brush units
n.02 brush plunger units
n.01 horizontal brush unit
n.01 horizontal rotated brush unit
total power installed Kw 8
with infeed loading carpet
weigth kgs. 2000
volt. 380/50
Number of sanding units 4 st.
sanding width 150 mm
Sanding height max. 150 mm
Control ja
Dimensions (L/W/H) 2000x1500x2100 mm
weight 650 kg
LÖWER - Finish Machine CrossMaster DDx2-200 with SPS Touch Panel 2
for the finish grinding and intermediate sanding of strips and bars of all
Kind with simultaneous processing from above and below.
Number of grinding units: 4 pcs.
Grinding width: 150 mm
Grinding height: 150 mm
2 disc aggregates from top and 2 disc aggregates from bottom
Disc unit eac...
Number of sanding units 6 st.
sanding width 220 mm
LÖWER automatic polishing and finishing machine FA 6D
Automatic machine for intermediate sanding of primed wooden windows. six
Process the sanding unit equipped with sanding flaps and sponges
one element 1.2 m x 1 m in approx. 65 seconds with the same
Surface finish through constant grinding parameters. six
Grinding units 0.37 kW, 1450 rpm for four-sided processing of surfaces and
Rebating, feed motor 0.37 kW, automatic scanning of the frame...
Number of sanding units 2 St.
sanding width 190 mm
Sanding height max. 4-150 mm
Hess Junior single wood sanding machine
-----
Machine is in checking process
Basic structure:
Stable, heavy welded construction made of thick-walled rectangular hollow
profiles
with additional, statically calculated reinforcements for optimal
Vibration damping.
Staggered grinding units with large ones
Belt drive drums for slip-free belt run. Two-point suction for direct
and airborne dust extraction with integr...
Number of sanding units 8 st.
sanding width 180 (260) mm
Bme0go8bui
Sanding height max. 160 mm
Dimensions (L/W/H) 3065x1600x1900 mm
weight of the machine ca. 1300 kg
Number of sanding units 6 St.
sanding width 150 mm
Sanding height max. 120 mm
Condition: new / unused
LÖWER Finish and intermediate grinding machine Leistomat LZ 6
For finishing (smoothing, de-fading and edge breaking)
Or intermediate grinding of profiled window frames
- Finish and intermediate grinding machine with six grinding-
lamellar aggregates,
1 surface units at the top, 4 profile units with
1 surface units at the bottom
4 profile units with oblique arrangement on the top right,...
Number of sanding units 4 St.
sanding width 200 mm
Sanding height max. 180 mm
Blrmc9wd
Number of sanding units 2 st.
sanding width 190 mm
Sanding height max. 4-150 mm
Hess Junior single wood sanding machine
-----
Basic structure:
Stable, heavy welded construction made of thick-walled rectangular hollow
profiles with additional, statically calculated stiffeners for optimal
vibration damping.
Offset arranged grinding units with large-dimensioned belt drive drums for slip-
free belt run. Two-point extraction for direct and airborne dust extraction
with integrated blow-off devi...
Number of sanding units 2 st.
sanding width 190 mm
Sanding height max. 4-150 mm
Hess Junior single wood sanding machine
-----
Machine is in checking process
Basic structure:
Stable, heavy welded construction made of thick-walled rectangular hollow
profiles
with additional, statically calculated reinforcements for optimal
Vibration damping.
Staggered grinding units with large ones
Belt drive drums for slip-free belt run. Two-point suction for direct
and airborne dust extraction with integr...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
How to receive 100% of our e-mails
10 valuable tricks for buying used machines online
