Used Pegic Gp 350 Rt for sale (12,045)

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator Nodpfxecvkalj Agvsld The differential air pressure switch Controller minimum gas pressure Luc overall control.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Nledexddamepfx Agved

Year of construction: 2018, condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Intralox belt 1350 x 300 mm Nlsdpfjtwq I Eox Agvsd With ejection of defective products in closed container Year of construction 2018

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Nodpjvlxbxjfx Agvold

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Nlsdpfox Ev Tkjx Agvod Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, mileage: 173,139 km, power: 125 kW (169.95 HP), first registration: 05/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,029 mm, total height: 2,786 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 0847. GW25NY35321 Special features: Second battery, passenger airbag, Audio System 21: Digital radio reception (DAB/DAB+) with 8" multifunction display, programmable battery monitoring, bi-xenon headlights with cornering light, vehicle without vinyl flooring in cargo/passenger compartment, LED cargo area lighting, fog lights with static cornering light, tire repair kit, Visibility Package 3, Seat Package 9/15: driver's seat (4-way adjustable) - double passenger seat including seat heating, fabric upholstery, steel wheels 6.5x16, high side paneling in cargo/passenger compartment. Additional equipment: Overhead storage in driver cab, Trailer Stability Program (TSA), Audio System 13: digital radio reception (DAB/DAB+) with 4" multifunction display, electrically adjustable and heated exterior mirrors, integrated turn signal in exterior mirrors, on-board computer, entry lighting, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: emergency brake assist, driver assistance system: crosswind assist, FordPass Connect incl. eCall, rear wing doors (opening angle 180 degrees), heating with recirculation, body/build: standard high roof panel van, body variant: medium-high roof, radiator grille with chrome trim, steering column (steering wheel) height and reach adjustable, engine 2.0 L – 125 kW TDCi CAT, My Key (second programmable vehicle key), front and rear parking assist system, digital radio reception (DAB+), wheelbase 3,750 mm, low emissions according to Euro 6d-TEMP, gear selector/leather shift knob, windshield wipers with adjustable intervals, sliding door cargo/passenger compartment right, rear mud flaps, side protection moldings, start/stop system, Trend, integrated rear step, securing lashing eyes (10), roll stability control (RSC), slightly tinted heat-insulating windows, additional electric heater, second foldable remote key...and much more. Nlsdexrib Ejpfx Agvjd Subject to errors and prior sale.

Condition: used, mileage: 80,000 km, power: 121 kW (164.51 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,350 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: air conditioning, central locking, Citroen Jumper, 23-08-2021, VF7YDCNAU12S45621 * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioning Cooling system Carrier Xarios 350 down to -20°C Payload: 700 kg Cargo compartment (internal): L 4.35 m x W 2.0 m x H 2.0 m The vehicle is in very good condition! TÜV valid until 10/2027 Financing available via Santander Bank. Njdpfjzlp D Hox Agvold

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Nlodpfxocqy I Ss Agvjd Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Nljdpfxon D Arhs Agved Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: Nlodpfx Agohkzt Novod • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, power: 121 kW (164.51 HP), fuel type: diesel, fuel: diesel, color: black, Year of construction: 2026, Equipment: ABS, UVV, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, second-hand vehicle warranty, sliding door, traction control, ONBOARD COMPUTER, air conditioning, speed control system (cruise control), gear/selector lever with leather grip, steering column (steering wheel) adjustable in height/length, diesel particulate filter, central locking with remote control, sliding door for cargo/passenger compartment on the right, low emissions according to Euro 6d-TEMP emissions standard, audio system: radio with USB and Bluetooth hands-free system, rear-view camera, low emissions according to Euro 6e emissions standard, body/superstructure: standard high-roof van, engine 2.0 L - 121 kW EcoBlue CAT, audio system 13: digital (DAB/DAB+) radio reception with multifunction display, heated windshield, windshield wipers with rain sensor, audio system: radio with multifunction display, 360° camera system, parking brake, electric, second key with folding remote control, fog lights with static cornering lights, audio navigation system, exterior mirrors, electrically foldable, technology package 6P, anti-lock braking system (ABS), exterior mirrors, electrically adjustable and heated, fog lights, parking pilot system front and rear, power windows, airbag for passenger side, rear top LED exterior lights, steel rims 6.5x16, metallic paint, driver's seat armrest, 2nd battery, storage compartment in the headliner of the driver's cab, ACC, all-weather/all-season tires, trailer stability program (TSA), hill start assist, turn signal integrated into the exterior mirror, rubber flooring in the cargo/passenger compartment, brake assist, docking station (MyFord Dock), entry lights, electronic brake force distribution (EBD), electronic stability program, electronic traction control, FordPass Connect incl. eCall, 6-speed transmission, rear hinged doors opening 180 degrees, heating with recirculation, high roof, intelligent acceleration control, Isofix mounts for child seat, cold start package, body/superstructure: double cab, automatic climate control, radiator grille with chrome trim, cargo area light LED, leather steering wheel, My Key - second programmable key, parking assistant (Active Park Assist), digital radio reception ... Subject to changes, prior sale and errors excepted. Njdpfx Agsznh Euovjld

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 07/2013, * Unladen weight: 780 kg * TÜV inspection expired * Loading ramp * Tires: 185 R14 LT Nsdpfszm E Iwsx Agvsld -----Internal vehicle number: 11443----Errors and prior sale excepted.

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Nsdpfew E D Ivox Agvold

Condition: used, mileage: 37,000 km, power: 96 kW (130.52 HP), first registration: 09/2016, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2016, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €11,700.00 Ford Transit L2H2 for sale, first owner. Registration date: 09/2016 Mileage: 37,000 km MOT: 07/2028 Last service at 32,000 km Further features see below!!! Opening hours and further information: Viewings/purchases possible without prior appointment: Viewings/purchases possible without prior appointment: Njdpey I Hzkjfx Agveld Mon - Thurs: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11, 84076 Pfeffenhausen Please, no emails, as we are unable to process them due to time constraints. Thank you for your understanding! – If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. If you have any questions, please contact automotive engineering master technician Christian Hirsch or our friendly staff. Special features: 2nd battery, Airbag, passenger side, Window in sliding door, right side, fixed, generator 240 A, Rear wing doors with glazing (opening angle 180 degrees), Rear window wiper, cargo area light LED, Cargo area partition behind driver/passenger with window, Tire repair kit, seat package 9 / 15 driver's seat (4-way adjustable) - passenger double seat including seat heating, fabric Further features: 3rd brake light, storage compartment in the headliner of the driver's cab, airbag, driver's side, traction control system (ASR), audio system: radio/CD player with multi-function display, exterior mirrors, electrically adjustable and heated, turn signal integrated in the exterior mirror, floor covering: vinyl in the cargo/passenger area, on-board computer, roof lining in the passenger compartment, rev counter, electronic brake force distribution (EBD), electronic differential lock (EDS), driving assistance system: hill start assist, grab handle B-pillar, heating with recirculation, interior filter: pollen filter, body/structure: high-roof van, body variant: medium-height roof, radiator grille silver, steering column (steering wheel) height/length adjustable, headlight range adjustment, truck registration, engine 2.0 L - 96 kW TDCi CAT, parking pilot system front and rear, production plant: Otosan, wheelbase 3300 mm, wheel covers, low emission according to emission standard Euro 6, sliding door, cargo/passenger area, right, side protection strips wide (side paneling), seats in the cargo/passenger area: 1st row, 3-seater bench, steel rims 6.5x16, bumper partially painted, Trend, rear step integrated, tinted glazing, trim in the cargo/passenger area: half-height, second key with remote control Mon - Thurs: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Automotive Engineering Master Technician: Christian Hirsch: Information provided on the internet is a non-binding description. It does not constitute a guarantee of characteristics. The seller is not liable for typing and data transmission errors/changes/input errors. Errors and prior sale are subject to change.

Condition: used, mileage: 116,000 km, power: 96 kW (130.52 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,150 mm, total width: 2,085 mm, total height: 2,170 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Errors and prior sale excepted! Internal number: 0406. JY07660 Nljdpfjyw Dz Hsx Agvjd ----Different vehicle location: 04425 Taucha Gerichtsweg 4 Contact: Mr. Ralph Bergel Tel. or Email: ----EQUIPMENT - Air conditioning (front) - Special paint finish in standard color - 1 battery - 6-speed gearbox - Electronic ABS with EBD - Driver’s side airbag - Manually adjustable exterior mirrors - On-board computer - Flat roof - Front overhead storage compartment - Headliner in driver's cab - Rev counter - ESP with TSC - Electrically operated front windows - Ford Easy Fuel - Glove compartment with cover - Interior lighting with delayed shutoff - Adjustable steering column - Diesel particulate filter - Low beam headlights - Power steering - Seat belts - Seats: Seat Package 4 - Daytime running lights - Recirculation switch - Immobilizer - Heat-insulating glass, lightly tinted - Central locking with remote control ... and much more. ----The vehicle is in unprepared/uncleaned condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / leasing possible with no down payment! Do you have any further questions? We are happy to assist you!

Condition: used, overall weight: 6,545 kg, color: orange, operation weight: 6,545 kg, maximum load weight: 3 kg, empty load weight: 3,045 kg, tire size: 225/75R17.5, Year of construction: 2012, total length: 442 mm, tire condition: 60 %, front tire size: 225/75R17.5 | 60%, rear tire size: 225/75R17.5 | 60%, maximum speed: 50 km/h, working width: 165 mm, Equipment: air conditioning, lighting, Tyres (front): 225/75R17.5, Tyres (rear): 225/75R17.5, First registration: 2012, Tow hitch - automatic, Tow hitch - manual._____We are offering for sale a used Ausa compact vehicle transporter M 350 H 4x4 Full Grip, equipped with a 2.0 TDI VW CommonRail engine, Euro 5 with EEV, 74 kW / 102 HP - Long three-way tipper - with quick-change frame - equipment carrier plate - air conditioning - pin & ball coupling - ABS - AUSA FullGrip system. Front attachment plate: 1,800 kg lifting capacity, joystick control for lift-lower, right-left, additional switch for float position and hydraulic circuit. Brakes: front hydraulic servo brake with front disc brakes; rear drum brake with ABS and EBD. Tyres: 225/75R17.5. Unladen weight: 3,045 kg, Payload: approx. 3,500 kg, Perm. GVW: approx. 6,545 kg, Towing capacity braked: 3,500 kg, Towing capacity unbraked: 750 kg. Length: 4,427 mm, Width: 1,750 mm, Outer edge of fender Height: 2,230 mm without beacon, 2,390 mm with beacon. Wheelbase: 2,160 mm, Turning circle (outer): 7,998 mm. 4x4 drive. Tipper bed internal dimensions (LxWxH): 2,540 x 1,650 x 400 mm. Comparable to Bonetti, Multicar, Pfau. You can find our complete range of used vehicles online. Further details available upon request. Subject to prior sale! Location: 94491 Hengersberg. Njdpfjyq Au Rjx Agveld

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm Njdezc Izaepfx Agvold - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: used, mileage: 191,305 km, power: 136 kW (184.91 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 2,339 kg, maximum load weight: 1,161 kg, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, parking heater, soot filter, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Nlsdsw Hxnmjpfx Agvod

Condition: like new (used), Year of construction: 2016, M024 — Wittmann Battenfeld Wittmann Battenfeld smart power 350/1000* (-) 📐 *CLAMPING UNIT* • Clamping force: 350 T • Coining: YES • Max mold weight: - kg • Max mold weight per plate: - kg • Size between bars (WxH): 800x720 mm • Min mold height: 400 mm • Max mold height: - mm • Max stroke open: 1240 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: NO 🔌 *MOLD INTERFACE* • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) Nledjy Tn Dwepfx Agved • Water cooling circuits: 8+6 • Hydraulic circuits (cores): 1+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: x 💉 *INJECTION UNIT* • Screw diameter: 45 mm • Nozzle face + thread: R??+M24x1,6 • Injection unit type: 1000 • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2480 Bar • Max injection rate: 280 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 7 • Sockets 400V/32A: 4 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 6 • Air pressure ports: 5 • User inputs / outputs: 0 / 0

Condition: like new (used), functionality: fully functional, Year of construction: 2010, As new. Tel & WhatsApp: 00491728909019. Nlodpey D Ah Eefx Agvjd 07907 Schleiz – Industriestr. 28 – Germany

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 200-350 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker - 1300x4000x2 Decks Vibrating Screen - 2000x6000x4 Decks Vibrating Screen with washing system - 1500x4000mm Dewatering screen with Hydrocyclone - Conveyor Belt System Nledpfxozd Evio Agved - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Weight 1400 kg Total power requirement 4,5 kw Nedpsvz Hqysfx Agveld

Condition: used, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, first registration: 01/2011, loading space length: 3,050 mm, loading space width: 1,700 mm, loading space height: 500 mm, Year of construction: 2011, Construction machinery trailers: - Gourdon - Type: GPA350 - Year of construction 2011 - towing eye - overrun braked - fully galvanized - Folding aluminum ramps, 180cm x 30cm with support Nsdpeqxuc Iofx Agveld - max. load per ramp: 1,785kg; max. total load (2 ramps): 3,570kg - track each 305cm x 50cm - open width (center of trailer): 67cm - Total width inside: 170cm Total trailer dimensions: 536cm x 234cm - Unladen weight: 700kg; permissible GG: 3,500kg - Height-adjustable drawbar - Spare wheel - Lashing eyes - Tandem axle - Loading height: 50cm; loading height in wheel recess: 43cm - Wheel recess distance: center - center: 215cm; wheel recess length 30cm each - Trailer from 1st hand - MULTIPLE MODELS IN STOCK You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, Our stationary crushing and screening plant, with a capacity of 200-350 tons per hour, consists of a 30 m³ vibrating feeding bunker, mid-screen, CLK-110 jaw crusher, cone crusher, vertical shaft impact crusher, stock and return conveyors, control cabin, and automation system. Products transferred to the feeding bunker are separated from dirt and mud using the intermediate screen and are bypassed with a bypass conveyor. The material above the screen goes to the jaw crusher, while the products on the second level drop onto the jaw discharge conveyor, and the products on the lowest level are discarded as bypass. The jaw crusher has a maximum feeding capacity of 800 mm and crushes the products, which first go to the washing screen. Here, the finest products are sent to the stock area with a screw washer, and the other products are sent to the cone crusher. The products coming out of the cone crusher are directed to the other screen and the vertical shaft impact crusher, allowing the desired products to be obtained from the final screen at high quality. TBX-30 Vibrating Feeding Bunker CLK-110 Jaw Crusher TE-2060x3 2000x6000 3-Deck Vibrating Washing Screen HY-800 8000x8000 Screw Washer Nlodpsyzxddefx Agvod 20m3 Cone Crusher Feeding Bunker CC-300 Cone Crusher 20m3 Vertical Shaft Impact Crusher Feeding Bunker VSI-900 Vertical Shaft Impact Crusher TE-2060x4 2000x6000 4-Deck Vibrating Screen TE-2060x3 2000x6000 3-Deck Vibrating Screen Conveyor Belts, Control Cabin, Electrical Panel, and Automation System

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Car transporter REPO R2P – Top quality for safe vehicle transport! This trailer is the ideal solution for the safe and professional transport of: Nljdpfx Aeyqyf Tjgvod Construction machinery and excavators, as well as other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for private and commercial use This car transporter impresses with its quality, reliability, and well-thought-out design – ideal for anyone who wants to transport their vehicle safely to its destination. Technical specifications: • Brand: REPO • Type: Vehicle transporter • Permissible total weight: 3500 kg • Tare weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5290 mm • Width: 2100 mm • Loading area length: 3500 mm • Vertical load: 150 kg The trailer is in absolutely new condition and is ready for immediate use. Location: Rheda - Wiedenbrück Price: €4,390 net plus VAT If you are interested or have any questions, please do not hesitate to contact us! An on-site viewing is possible by arrangement.