Used Optimat Bhx 500 for sale (15,456)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Nwsdpfx Agoyg E R Hs Isc Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm Nsdpfx Ajx S Hzlsg Iewc ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Year of construction: 2011, condition: ready for operation (used), Main Drive Nwsdpfx Agjx D Nvgs Iec Number of axis 3 This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: new, Year of construction: 2025, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Nodpfev Dvkzex Ag Iswc Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, machine/vehicle number: 008322, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 28 Total number of tool changer positions: 4 Njdpfx Asx A Tmyog Iswc

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84 Nodewuckhopfx Ag Iewc

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0-250-11-2763, Used drilling center Optimat BHX 055 Built-in features: □ Horizontal drilling head with 4 spindles (X axis) □ Horizontal drilling head with 2 spindles (Y axis) □ Drilling head with 13 spindles □ Grooving saw D=100 mm (X direction) □ Pneumatic positioning stopper for workpiece alignment □ Workpiece clamping system Units / Equipment: □ 10 kW milling motor with frequency inverter (HSK63) □ 4-position tool magazine □ WOODWOP 7 software Workpiece dimensions: □ Maximum: 3050 × 850 mm □ Minimum: 200 × 70 mm □ Material thickness: 12–60 mm General information: Nwsdpex Tz Shsfx Ag Ioc Year of manufacture: 2018 □ POWERCONTROL with POWERTOUCH system □ CE marking □ Condition: ready for operation / demonstration possible □ Availability: in stock Documentation: □ Language: Polish □ Documentation: paper + digital media

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Nwjdpfx Ajydnu Nsg Ijc Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: ready for operation (used), functionality: fully functional, controller model: POWER PC 85 + WOODWOP 6.0, working width: 850 mm, working height: 60 mm, working length: 3,050 mm, TECHNICAL DETAILS Working dimensions: 3,050 x 850 mm Working height: 12 - 60 mm Drilling Head Vertical spindles X-axis: 8 Vertical spindles Y-axis: 5 Horizontal spindles X-axis: 4 Horizontal spindles Y-axis: 2 Milling Head Axes: 3 Nwjdpfx Aeydmcreg Iec Tool change: Automatic Diameter of integrated saw unit: 100 mm MACHINE DETAILS Control: POWER PC 85 + WOODWOP 6.0 (updated in 2023) EQUIPMENT 4-position tool changer

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet Nwedpolkdpmjfx Ag Ijc No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: refurbished (used), Numerical Control Type Power Control Software No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 2 Drilling heads for each horizontal unit (1 x Kw 1,5) No. 11 Splindles for each horizontal drilling head Max. working width (mm) 3000 Min. working width (mm) 250 No. 6 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Nwedpfx Aovhcbzog Isc N. 11 Spindles for each drilling head of the top vertical supports No. 6 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 50 / 60 (ca.)

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 Njdpfxjivawpe Ag Iowc No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Nodjh E Sghopfx Ag Ijwc Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: excellent (used), Year of construction: 2007, operating hours: 23,983 h, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, spindle speed (max.): 7,500 rpm, TECHNICAL DETAILS Workpiece length: 200 – 2,500 mm Workpiece width: 70 – 1,000 mm Workpiece thickness: 4 – 80 mm Power and Operation Operating power: 21 kW Software: WoodWop 4.5 Speeds Rapid traverse X-axis: 130 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Spindle Spindle speed: 1,500 – 7,500 rpm Compressed air and extraction Compressed air requirement: 7 bar Dust extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Nsdpjwi Inzsfx Ag Iewc Weight: 5.5 t Operating hours: 23,983 h Workpiece counter: 102,199 pieces

Condition: new, Year of construction: 2026, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm Nwjdov Du Tnjpfx Ag Ioc extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: new, Year of construction: 2023, Standby power 12kVA/9.5kW Power factor cos φ 0.8 Full load 11.5kVA/9kW Voltage 230/400V Generator power 12/8.3 V/A Number of phases 3 Type of self-exciting alternator Nwedpei Nxhdefx Ag Ijc Electric start Noise level at 7m 75dB Tank capacity 30 L Electrical box dimensions (D x L)) 245 x 130 mm Oil type CC or CD Air cooling Frequency 50Hz Engine speed 3000 rpm Key/push start Working temperature - 15°C- 40°C Storage temperature - 25°C - 45°C Engine Model 1102F Engine type air-cooled single-cylinder diesel engine Cylinder diameter and length 102 x 88 mm Engine capacity 718 cc Fuel diesel 2L oil tank capacity Injection type direct injection Tank capacity 30 L IP rating IP 44 on front panel EURO V emission standard Overall dimensions (length x width x height) 1120 x 640 x 900 mm Weight 240 kg

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Nwedsynfxgspfx Ag Isc Easy to use, quick to set up.

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Nodpfoynfxasx Ag Iowc Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), GUK ZK-500 Mobile Folding Machine Manufactured by GUK, Germany. The machine is in perfect, like-new condition. All belts are new. Nedpfoyl Rydjx Ag Ijwc Can be connected to any GUK folding machine. The device also operates independently of the folding machine. Flexible speed control.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA Nsdpfxex S Il Ee Ag Iswc table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. Nwodpjyl Uzxofx Ag Ioc - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: new, 21.25 m² storage platform incl. stairs, railings on two sides, top edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Supports, stairs, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, OK natural & UK white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 Nwjdsyl Ul Dspfx Ag Isc - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x Chipboard - 01 x Stairs, 37° incline - Approx. 8.25 running meters Railing - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5026,00 € net 5980,94 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Nwedjw R E Hpopfx Ag Ijc Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: new, Catalogue number O231 - New machine, in stock - CE certificate Nwedpfx Ajx Sq Hfog Ijc TECHNICAL DATA - Main motor power: 5.5 kW (7.5 HP) - Feed motor power: 0.5 kW (0.75 HP) - Shaft diameter: 120 mm - Spindle speed: 5,500 rpm - Feed speed: 4 – 20 m/min - Max. working width: 630 mm - Min. working length: 280 mm - Max. working height: 300 mm - Min. thickness: 5 mm - Max. cutting depth: 8 mm - Number of knives: 4 pcs - Extraction port diameter: 160 mm - Machine dimensions: 1250 x 1270 x 1180 mm - Weight: 870 kg Original photos Net price: 35,000 PLN Net price: 8,300 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Nwodpfx Agsxpic Rj Ioc TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions