Used Sawmills for sale (668)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m Csdpfxs Aavnfs Ak Aeri The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: good (used), functionality: fully functional, EWD High-Performance Frame Saw – HDN 600 / GDZ 600 / LSH Several EWD high-performance and full-frame saws in very good technical condition are available for sale. The machines can be offered individually or together, depending on the model. Complete overhaul possible upon request. EWD HDN 600 – High-Performance Frame Saw / High-Speed Frame Saw Well-maintained, high-performance EWD HDN 600 full-frame saw in very good condition. Already renewed or modernized: * Struts renewed (2026) * Flywheel renewed (2026) * Water-cooled guides installed (2026) Technical Data Manufacturer: EWD Type: HDN 600 Frame width: 710 × 735 mm Stroke: 600 mm Speed: 310 rpm Equipment / Scope of delivery Csdpfxj Ahfmds Ak Ajri * Fully hydraulic design * Automatic overhang adjustment * Hydraulic saw tensioner * Hydraulic saw chuck * Pre-selection gearbox * Drive motor * Hydraulically driven splitting wedge, type AVER * Remotely controlled clamping carriage * Electrical control cabinet with control system The system is in very good technical condition and can be completely overhauled and delivered upon request. --- EWD GDZ 600 – Full-Frame Saw / Frame Saw An EWD GDZ 600 is also available in very good condition. Equipment / Scope of delivery * Hydraulic saw tensioner * Splitting wedge * Pre-selection gearbox * Remotely controlled clamping carriage H38 * Cabin The EWD GDZ 600 can also be offered with a complete overhaul upon request. --- EWD LSH Frame Saw In addition, 1 x EWD LSH frame saw is in stock. Further details on design, equipment and technical condition are available upon request. Availability All machines can be inspected by appointment. Further technical data, photos, prices and information on the respective scope of delivery are available upon request.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Brodbaek centering device. Crjde Ahhzaepfx Ak Aei

Condition: used, Year of construction: 1988, functionality: fully functional, Wood removal: up to 8 packages possible Sorting: sorting for 3 qualities possible Magazines: seven magazines with a slat length of 1.30m Csdo Ah Ekmjpfx Ak Ajri Four of these can be converted to a slat length of 1.10m Availability: Week 2/2027 Dismantling: Dismantling will be carried out by us (OLWO Worb AG). Transport: Transport will be organized by the buyer.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Cjdpfxjyz Ia Ie Ak Aeri Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. Codpfx Akoyxhq Uj Ajri The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Saw motor for Linck VSV 80, with 80 kW and telescopic shaft. Saw motor for Linck VS 66. Crodpfx Ao Ahhzlek Aei

Condition: good (used), functionality: fully functional, Primultini 1300, fully functional and in very good working condition. Crjdps Ahdv Sjfx Ak Asi

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Crjdjztk Atepfx Ak Aei Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 1989, For sale: Complete material handling system from a sawmill, manufactured in 1989, from Möhringer. - Log infeed system - Roller conveyor with cutoff saws - Transverse conveyor - Vibrating conveyors, approx. 45 m - Double scraper chain conveyor with two discharge points The material handling system has already been dismantled and can be inspected on site. Dimensions can be taken from the layout plan. Inspection required! Code Ag Nuaepfx Ak Ajri

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously Cjdpfs Adr Uvox Ak Aeri • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Credpjzagkzjfx Ak Aei Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: good (used), STRAVIS SAWMILL LINE – TWO-ARBOR MULTI-RIP SAW + FEED AND ROLLER TABLES + CENTERING DEVICE For sale: a complete set of machines and equipment for wood processing, designed for use in a sawmill. Credpfj Afqzqex Ak Aji The set includes: - STRAVIS PW 16.5 two-arbor multi-rip saw, - two main motors with a power of 55 kW each, - equipment for destacking wood, - feed tables, - roller and conveyor tables, - centering device for positioning the material before cutting, - other components of the line as shown in the photos. Multi-rip saw specifications: - Manufacturer: STRAVIS – Arkadiusz Pankowski - Model: PW 16.5 - Year of manufacture: 2020 - Serial number: 1063 - Main motor power: 2 × 55 kW - Maximum cutting height: 165 mm - Industrial power supply The multi-rip saw is designed for longitudinal ripping of wooden prisms into boards and edge boards. The two-arbor design allows for the simultaneous use of saw units on two arbors. The set is sold as a whole. This is an offer for a sawmill planning to expand or upgrade its production line. The visual condition and completeness of the individual components can be seen in the attached photos.

Year of construction: 2018, condition: like new (used), functionality: fully functional, WALTER TD500 KBA Circular Saw | Year 2018 | CE | After Inspection | Very Good Condition | KALISZ WALTER TD500 KBA circular saw – a robust and efficient machine designed for longitudinal trimming of round timber. The unit is in very good technical condition, has undergone inspection, and is ready for operation. This machine is ideal for sawmills and wood processing plants, providing high performance and precise cutting. TECHNICAL SPECIFICATIONS: - Manufacturer: WALTER - Model: TD500 KBA - Year of manufacture: 2018 - Condition: very good - After technical inspection - CE certificate - Operating manual included - Infeed table: 6 m (3 m standard + 3 m extension) - Main motor power: 22 kW or 30 kW - Feed motor: 1.5 kW - Length of infeed table: 6000 mm - Maximum log diameter: 350 mm - Minimum log diameter: 60 mm - Adjustable feed speed via frequency inverter - Feed speed range: 0–25 m/min - Two rows of pawls Codpfjz A Aytex Ak Aeri - Saw blade diameter: 500 mm - Spindle diameter: 70 mm - Spindle support - Chip conveyor - Three receiving rollers - Suction ports: 2 × 200 mm Machine advantages: - Renowned manufacturer WALTER - Very good technical condition - After inspection – ready for operation - Long, 6-meter infeed table - Smooth feed speed adjustment via frequency inverter - High performance and durable construction - Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT.

Condition: used, Year of construction: 1993, functionality: fully functional, Complete Sawmill / Sawing Line E.GILLET–KARA-STENNER Description: For sale: complete E.GILLET–KARA-STENNER sawing line for professional timber processing. Cedpfxozhbr Ij Ak Aori The line includes log handling, sawing, board discharge, cross transport and length cutting equipment. Suitable for a sawmill or wood processing company looking for a complete production line rather than separate individual machines. Included equipment: 1. E.GILLET wide band saw 2. KARA YS-VI, LS-240 circular saw 3. STENNER 105 wide band saw 4. Log conveyor — 26 m 5. Log conveyor — 7 m 6. Log splitter / log divider 7. Roller table — 16 m 8. Board unloading table 9. Cross conveyor — 8 m 10. RKG 1-400 cut-off / length cutting saw 11. Roller table — 6 m If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, Manufacturer: SERRA Maschinenbau GmbH, Germany Type: Log band saw (Block bandsaw machine) Model / Type XE135-6-S / XE135 Year of manufacture: 2022 Material number / factory number: XE135-2022-1750 Crodpfxs Aful Hs Ak Aji Identification number: W09XE6060NESD1750 Power supply: 3-phase, 400 V, 50 Hz Current (from nameplate): 70.8 A Operating pressure: 180 bar Weight: 5350 kg Catalogue specifications XE135: Basic cutting length: 6 m Nominal log diameter: Up to 135 cm Cutting width: 100 cm Clearance above / below the blade: 50 cm / 111 cm Blade wheel diameter: 800 mm Blade width: 120 mm; also 140 mm Blade length: 5520-6030 mm, depending on the setting Blade thickness: 1.1 or 1.2 mm Tensioning mechanism stroke: 300 mm Guide / guard opening: Hydraulic Head height adjustment: Electric Head feed: Electric / hydraulic Log handling: Hydraulic Frame: I-beams 300 mm; steel supports 20 mm Wood support surfaces: Stainless steel Catalogue performance: 33 m³ / 8 h Seller contact: 571*326*804 Machine currently operating in Poland.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Hundegger HMA / HM-C 4-sided timber planing machine – Year of manufacture 1999 – Complete package including infeed and outfeed conveyors & ejector – Sale ex-stock / FCA, loaded Description: For sale is a reliable and robust 4-sided timber planing and notching machine from the quality manufacturer Hundegger, type HMA / HM-C, manufactured in 1999. The machine is in well-maintained, fully functional condition and operated flawlessly until it was dismantled. The system has already been professionally disassembled and stored in a dry place. An inspection of the components at the warehouse is possible with short notice after consultation. Extensive complete package (immediately ready for collection): The unit will be delivered as a complete system including all mechanization. Perfect for timber construction companies, carpentry shops, or sawmills looking for an immediately available solution. • Including infeed and outfeed conveyors (robust industrial design) Cjdpe Aibl Sofx Ak Ajri • Including automatic ejector (integrated transverse conveyor for efficient material flow) Technical data & highlights: • Manufacturer: Hans Hundegger GmbH • Year of manufacture: 1999 • Processing cross-section: 4-sided up to approx. 260 x 400 mm (maximum passage approx. 300 x 400 mm) • Units: 4 planing shafts (top, bottom, left, right) + 4 separate notching units • Feed rate: Infinitely adjustable (automatically regulated depending on the load) • Condition: Professionally disassembled, stored in a dry place Sales and delivery conditions (FCA): • Price: €16,800.00 (net, plus VAT / a regular invoice will be issued)

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Csdpfx As Ad Ur Rek Aeri Wheel diameter: 1300 mm Wheel width: 170 mm Log carriage length: 4300 mm Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: used, Linck Conveyor Technology for Gate Saws - Splitting wedge with drive - Tensioning carriage - Auxiliary carriage Cedj Ag Rchopfx Ak Asri Prior inspection required!

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Credoxtwwkepfx Ak Aei Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. Codpfx Asz I Tabok Ajri FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16041309, cutting length (max.): 4,800 mm, cutting height (max.): 1,150 mm, roll diameter: 115 mm, saw drive: 30 W, input current: 56 A, input voltage: 400 V, Equipment: 3rd hydraulic function, WRAVOR WRC 1150 AC BAND SAWMILL FOR SALE Stationary WRAVOR WRC 1150 AC band sawmill with log infeed system. Year of manufacture: 2016 The machine is still in operation and can be inspected while running. Technical specifications: Capacity when processing oak logs, diameter 250–700 mm: approx. 18–20 m³ per 8-hour shift Total installed power: 66 kW Codpfey Hx I Tsx Ak Asri Main drive motor: 30 kW 2 debarkers Saw blade dimensions: 140 × 8,190 mm Wheel diameter: 1,150 mm Wheel width: 115 mm Cutting optimization software The machine is currently installed and operational. Please contact us for further information, photos, videos, price or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Vertical log bandsawline Primultini with side chippercanter, from 2016, max log length 7,2 m, diam 20-100 cm Vertical log bandsaw Primultini 1400SHF-CEI Chipper canter Primultini WSF Saw Path cleaning machine Multiripsaw Paul KME3-1012-L Loginfeed and conveyors between machines Crjdpfoz N Tdwox Ak Asi Operating Electronics Line stands under power and can be started-up for demo without logs

Condition: like new (used), Year of construction: 2001, operating hours: 7,200 h, functionality: fully functional, overall weight: 20,000 kg, cutting height (max.): 800 mm, cutting width (max.): 1,000 mm, total height: 3,000 mm, total length: 10,000 mm, transport width: 2,500 mm, Equipment: cabin, documentation/manual, Complete sawmill plant in excellent condition. The plant does not require any overhaul as it has been used sparingly. The plant consists of: * Artiglio 1300 log saw * Modesto edger with one fixed blade and one movable blade * Ferrari chipper Codpoz N Sxgsfx Ak Aeri * Complete conveying system, log reloader, vertical saw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Codpfxjxz Eg No Ak Aori Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.