Used Plastic Injection Molding Machine for sale (67,776)

Condition: used, Injection molding machine ARBURG, type Allrounder 320 C 600-100 Year of manufacture: 09/2002 Clamping force: 60 tons Screw diameter: 25 mm Tjdpfszqglrex Aqxja The machine will be dismantled on August 17, 2026, and transported to our warehouse or directly to your location.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Tedpfx Aqozna T Rjxsa

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Tsdpfxox Nhy Rs Aqxea

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Tjdpezncmtefx Aqxea Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Tsdpfszncmasx Aqxsa Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h Tedpszmxdljfx Aqxoa TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Todpfx Ajx Szwhsqxsa Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: used, Wittmann Battenfeld 3 units of Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Theoretical displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar spacing: 370 x 420 mm Minimum mold height: 200 mm Tedpfx Aszpwrgoqxoa Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Dismantling and collection must be carried out by the buyer. Scope of delivery: (See image) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2006, machine/vehicle number: 61008535, This KraussMaffei KM950-6100 MX large injection molding machine will be auctioned off online as part of our industrial auction / machinery auction – Wirthwein Friedberg GmbH – machines, packaging, and other materials. Tedozqymiopfx Aqxsa You can find this and many other items on our platform.

Condition: used, Year of construction: 2005, machine/vehicle number: 423086, This Ferromatik Milacron Elektra 110 evolution injection molding machine will be auctioned off in our industrial auction / machinery auction (follow-up auction of Wirthwein Friedberg GmbH – machinery, packaging, and other materials) online. You can find this and many other items on our platform. Tjdpfx Aozqylleqxsa

Condition: used, This Ferromatik Milacron K-TEC 60 injection molding machine will be auctioned off online as part of our industrial auction / machine auction post-auction for Wirthwein Friedberg GmbH - machines, packaging, and other materials. Tsdpfxszqyk Ij Aqxea You can find this and many other items on our platform.

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Tedpfjzqcl Iex Aqxea Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Year of manufacture: 2005 Machine number: 198190 Dimensions L/W/H: 350x110x200cm Condition: used

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, All-electric injection molding machine with Multilift, conveyor belt, and safety fence from current production Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year: 2022 Machine No.: 259303 Operating Hours: 12,182 h Injection Unit Injection unit/screw: 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating power: 9.7 kW Heating zones: 5 Nozzle travel: 300 mm, 50 kN Injection pressure: 2000 bar Clamping Unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 mm Tsdpozn Av Iefx Aqxea Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum tool height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Cylinder liner, highly wear-resistant • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Servo-controlled nozzle travel • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate safety • Protective device, open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls: 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt, electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles • Optimization/Operator Assistance: for adapting the machine to individual operational needs • Quality assurance: • Extends the standard quality monitoring and documentation: • Options for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting • Freely configurable page for start parameters (adjust cycles with other parameters instead of production parameters) • Socket combination: 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits, each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW / 230V each • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (folding axis) pneumatic X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic folding axis 0-90° 13 Nm / Weight 1.2 kg with special equipment X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis, end positions monitored Clearance height increased by 200 mm • Conveyor belt • Safety fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm +++ Attention: Machine is part of an online auction! +++ Tjdpezn Aqfsfx Aqxoa

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Tsdszn Ap Iepfx Aqxsa Note: Machine is part of an online auction!

Condition: used, Year of construction: 2007, Manufacturer: KRAUSS MAFFEI, Type: KM350-1900 C2, Year of manufacture: 2007, Serial no. 61009348, Control system, Manufacturer: Krauss Maffei MC5, Clamping force: 350 t, Screw diameter: 60 mm, Die opening: 1,450 mm, Clear opening horizontal/vertical: 710/710 mm, 6 cascades, 16 hot runner nozzles, 2 hydraulic core pullers per side (DS/AS), Shot weight: 700 g, Parts removal robot, Manufacturer: Sepro, Type SR4020S3, Year of manufacture: 2005, Serial no. P12424 47,952 hours (30,821 pure production hours) Tjdpszn Amyefx Aqxea +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. Tjdpey I R Tqefx Aqxea +++ Attention: Machine is part of an online auction! +++

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Tsdpfx Aqjzk D Dxoxsa Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h Todpfx Aevkqfaeqxea

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Todpfx Aqozpauksxja Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Tedezpat Tepfx Aqxoa Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Tedpezpatmofx Aqxea Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Todszparijpfx Aqxoa Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Tjdpfxezpaqxj Aqxea Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Tsdpfx Aszpap Ijqxoa Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request