4
Ejection stroke: 35mm, weight: 700kg.
Dalatlee3
2
Connected load: 17.71kW.
Sdws0vzf
11
clamping force: 1000 kN
distance between tie bars h:: 420 mm
distance between tie bars v:: 420 mm
size of mould plates h: 570 mm
size of mould plates v: 570 mm
min. mould height: 250 mm
max. mould height: 500 mm
max. open daylight: 850 mm
opening stroke: 350 mm
screw diameter: 35 mm
swept volume: 154 ccm
injection pressure: 2500 bar
measures & weight
measures of machine lxbxh: 4.67m x 1.4m x 2.18m
total weight: 5100KG
equipment included
screen text german
CEE-socket 16A
complact f...
3
screw size:30 mm
injection shot weight in Polysterol:71 g/PS
closing pressure:250 kN
Ezdbwmj
daylight:270 x 270 mm
opening stroke:275 mm
mould height - Max./min.:200 mm
control:Selogica
daylight between platens - max.:475 mm
total power requirement:13,1 kW
weight of the machine ca.:2,0 t
! LESS THAN 1000 OPERATION HOURS !
S-version I
- highly wear resistant plastification unit
- with Selogica control
- technology stage 2 - with 2 regulating pumps
- clamping unit, electr. swiveling incl. ...
15
General Data
Dyt3h7u
Measurements width 4360 mm
Measurements depth 1718 mm
Measurements height 3910 mm
Machine weight 7600 kg
Injection Unit
Screw diameter 35 mm
Injection pressure 2500 bar
Clamping Unit
Clamping force 1000 kN
This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 0 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing.
Application Types
Injection Moulding
7
Control, circuit boards, spare parts for Arburg, injection molding machines
-Type: ARB 389 D KPL
-Weight: 0.5 kg
Qly3sne3h
8
Arburg 420C-1000-350 (174) with conveyor belt
Qsmkd
Product Code: 174
Availability: In Stock
Year of production: 2001
Brand: Arburg
Technical data
Shot Weight: 210 g
Clamping Force: 1,000 kN
Screw dia: 45 mm
Injection pressure: 1670 bar
Tie bar distance: 420x420 mm
Platen size: 570x570 mm
Mould height min.: 250 mm
Type of controls: Selogica
Language: German
Power: 32,2 kW
Workinghours: 89.240 h
Weight: 3430 kg
Dimensions: 4,4x1,7 m
Hopper: No
Core pull: Yes
Euromap: Yes
Air valve: Yes
7
Here we offer a very well maintained constantly serviced injection molding machine.
Manufacturer: Arburg
Type: 370C 800-250
Control Selogica
Year of manufacture: 2000
constantly maintained
Special features/extras:
high wear resistent screw and cylinder
hydro bubble accumulator
ALS Arburg master computer interface
Handling interface
On request with Wittmann W711-0601 year 2006 (4x Vak, 6 x gripper)
Temperature release up to 350 °C
Software version 3.090
Closing side:
Clamping force: 800 k...
1
injection moulding machine ARBURG Allrounder 520 C 2000-800
warehouse no.: 503128
manufacturer: ARBURG
type: Allrounder 520 C 2000-800
controller: Selogica
year of construction: 2005
technical data clamping unit
clamping force: 2000 kN
distance between tie bars h:: 520 mm
distance between tie bars v:: 520 mm
size of mould plates h: 728 mm
size of mould plates v: 728 mm
min. mould height: 250 mm
max. open daylight: 900 mm
opening stroke: 650 mm
ejector stroke: 225 mm
ejector force: 66 kN
tech...
2
screw size:30 mm
injection shot weight in Polysterol:77 g/PS
closing pressure:500 kN
daylight:320 x 320 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica
daylight between platens - max.:550 mm
total power requirement:22,9 kW
weight of the machine ca.:2,3 t
operation hours pump: 22.100
operation hours automatic: 15.600
Jubilee modell type GOLDEN EDITION
- highly wear resistant plastification unit
Qnyjh
- with Selogica control with touchscreen
- hydraulic plant wit...
10
General Data
Measurements width 4360 mm
Measurements depth 1718 mm
Measurements height 3085 mm
Machine weight 7200 kg
Injection Unit
Screw diameter 15 mm
Injection pressure 2500 bar
Clamping Unit
Clamping force 800 kN
General Data
Measurements width 4360 mm
Measurements depth 1718 mm
Measurements height 3085 mm
Machine weight 7200 kg
Injection Unit
Screw diameter 15 mm
Injection pressure 2500 bar
Clamping Unit
Clamping force 800 kN
This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding ...
10
Clamping unit:
B8qbntibre
Clamping force: 50 Ton
Opening force max KN/mm: 40/250
Mould height, fixed /variable min. Mm: 200
Platen daylight fixed/variable max. Mm: 450-550
Weight of movable mould half max kg: 230
Ejector force/stroke max. kN/mm: 30/70
Injection unit 100
Screw dia: 20 mm
Effective screw lenght l/d 25
Injection volume: 31 cm3
Shot weight: 29 g /PS
Weight of machine3049 kg
Note: safety devices are missing - is sold in that condition - without safety devices. Machine was installed i...
8
Arburg 420C-1000-250 (176) with conveyor belt
Product Code: 176
Availability: In Stock
Year of production: 1998
Brand: Arburg
Technical data
Shot Weight: 89 g
Clamping Force: 1,000 kN
Screw dia: 30 mm
Cxd7xou0
Injection pressure: 2470 bar
Tie bar distance: 420x420 mm
Platen size: 570x570 mm
Mould height min.: 250 mm
Type of controls: Selogica
Language: German
Power: 25 kW
Workinghours: 70.643 h
Weight: 3180 kg
Dimensions: 4,5x1,7 m
Hopper: No
Core pull: Yes
3
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box
-Table comes from an injection molding machine
-Make: Arburg
-Type: Allrounder 320-210-750 KN
-Dimensions table: Ø 320 mm
-Bore center: Ø mm
-Dimensions: 320/320/H163 mm
D8eho8p
-Weight: 20 kg
2
Arburg Multilift control panel
- removed from Multilift V6
Cbn3cmj9yl
- removed from running machine
- fully functional
manufacturer: Arburg
Spare part no.: 203.348
2
screw size:45 mm
injection unit:400
for brand:Arburg
quality:TOP
B7mvl9mtgt
condition:komplett überholt / repariert
5
General Data
Machine weight 2230 kg
Clamping Unit
Clamping force 500 kn
Media
Main electronic connection 400 V3 - 50 hz
This Arburg ALLROUNDER Centex 270 C 500 - 250 Injection Moulding Machine was built in Germany in the year 1999. It is equipped with a control unit of the same brand. This machine works with clamping force 500 kN.
Application Types
Injection Moulding
E9bzqvn
13
Brand: Arburg
Czqt9u2sc
Model: 375V 500-290 (vertical) Schiebetisch/ Sliding table
Clamping unit:
Clamping force: 50 Ton
Opening force max KN/mm: 40/250
Mould height, fixed /variable min. mm: 170-200
Platen daylight fixed/variable max. mm: 422-550
Weight of movable mould half max kg: 230
Ejector force/stroke max. kN/mm: 30/70
Injection unit 290
Screw dia: 30 mm (highly resistant)
Effective screw lenght l/d 25
Injection volume: 106 cm3
Shot weight: 97 g /PS
Injection pressure/holding pressure: 25...
15
Manufacturer: Arburg
Machine type: 420 S 1000- 170 VU, vertical machine
Year of manufacture: 03 / 2009
Control: Selogica
Operating hours approx. h 3.000
Clamping force: t 100
opening stroke: mm 350
Installation height min.: mm 350
distance between platens: mm 700
Cdcuyr0rcv
tie bar spacing: mm 420 x 420
Cylinder module 1, mounted on machine
Screw Ø: mm 30
Screw length L/D 20
Stroke volume: ccm 85
Injection part weight: g/PS 77
Max. injection pressure: bar 2.000
Cylinder module 2, as access...
5
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box
-Table comes from an injection molding machine
-Make: Arburg
-Type: Allrounder 320-210-750 KN
-Dimensions table: 490 x 490 mm
-Bore center: Ø 125 mm
-Thread holes: M12
Gt99ko
-Dimensions: 490/490/H400 mm
-Weight: 236 kg
2
Arburg 669 base board card
- for Arburg Selogica control
Bj8qli3i
- 8 MB
- removed from running machine
- fully functional
manufacturer: Arburg
type: Arburg 669
sparepart no.: 118.328
5
screw size:55 mm
injection shot weight in Polysterol:434 g/PS
closing pressure:1000 kN
H8nznd7
daylight:470 x 470 mm
control:Selogica
weight of the machine ca.:5,5 t
operation hours pump about: 23.255
operation hours automatic: 19.861
version Hi drive
- highly wear-resistant plastification unit
- Standard screw coupling with larger two-edged screw drive
- Selogica control direct with sequence editor and touchscreen operation
- Drive unit with:
- Drive motor 11 kW
- Pump combination wit...
2
Control Unit
Brand Dialogika
Model 1998
J0kw99o
Injection Unit
Screw diameter 35
Clamping Unit
Clamping force 500 kn
This Arburg Allrounder Centex 320 CD-500-225 Injection Moulding Machine was manufactured in Germany in 1998. It is equipped with a Dialogika control unit. It works with a clamping force of 500 kN and a screw diameter of 35 mm. Works perfectly. The operating manual as well as the software and machine application programs are enclosed.
Application Types
Injection Moulding
2
Clamping force: 320 ton
Oppening path: 700 mm
Platten size: 1040 x 1040 mm
Screw diameter: 70 mm
Cbknxwqe0e
Injection volume: 1078 cm3
Distance between tie bars: 720 x 720 mm
Producer: Arburg
Model: 720 S 3200-2100
Clamping unit 720S
Clamping force: 360 ton (increased by Arburg )
Opening path: 700 mm
Mould installation height min: 300 mm
Distance between tie bars: 720 x 720 mm
Platten size: 1040 x 1040 mm
Injection unit 2100
Screw diameter: 70 mm (also optional 60 or 80mm)
Injection volume: 1078...
9
ARBURG
Y8sz9t
Circuit Board with Pickup-Module
ARB 729 SN: 138.587 V.05
Modul SN: 173858 #031640 EC06
8 MB
4
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box
-Table: comes from an injection molding machine
-Make: Arburg
-Type:
-Dimensions table: 735 x 665 mm
-Bore center: Ø 125 mm
-Thread holes: M12
C7lmasj
-Dimensions: 735/665/H185 mm
-Weight: 230 kg
1
Manufacturer: Arburg
Type: Multilift H - spare parts
Condition: nicht funktionsfähig
AXIS: -
X-axis: 100 mm
Y-axis: xxx
2iqqutgv
Z-axis: 1000 mm
Additional axes A-B-C: -
Load capacity: -
Gripper: 2 x
Vacuum: 2 x
CONTROL: -
Screen language: DE
Operating manuel: DE
Safety device: -
Interface: Euromap 67
Adapter: -
Prop for Z-axis: -
Total size L x B x H: -
Bore pattern + connection thread: -
Protection device: -
Total weight: -
Gesamtgröße L x B x H: -
Total installed power: 3 kW
3
screw size:50 mm
injection shot weight in Polysterol:297 g/PS
closing pressure:2200 kN
daylight:570 x 570 mm
opening stroke:max. 650 mm
mould height - Max./min.:300-950 mm
control:Selogica
daylight between platens - max.:950 mm
total power requirement:45,8 kW
weight of the machine ca.:7,7 t
dimensions of the machine ca.:5,50x2,10x2,20 m
C version IV
- LCD colour monitor, colour type
- Selogica control unit
- technology step 2 servoregulated with 2 -circuit pump technology
Cgfqv9s8
- highly w...
4
General Data
Machine weight 2330 kg
Clamping Unit
Clamping force 500 kN
Ghomkzgh
This Arburg Allrounder 320 C / S 500-250 Vo Injection Moulding Machine was manufactured in 1999. This machine has a 500 kN Clamping force.
Application Types
Injection Moulding
2
Model: 470C 1500-800 (GOLDEN EDITION)
- 2 pumps
- Screw dia : 55 mm wear resistant
- Language: English
Qsnov
- 5 cooling cicuids
New machine immediately available from warehouse!
12
Arburg 370C 800-250
year of manufacture 09/2004
Control Selogica
Operating hours: approx. 75.000h (pump)
Screw diameter 40 mm
fuel weight: approx. 172gr./hp
distance between tie bars 370 x 370mm
Machine weight: 3180kg
Extras: 1x core puller, color dosing interface & handling interface
Machine is free!
Cc2gtqgvtr
Changes, prior sale and errors excepted!
11
Regularly maintained machine in good condition, for sale in cleaned and inspected condition with a 30 screw.
Gy2c30
It is equipped with many extras, such as tool hot channels, tool temperers, pick-up and selection equipment, drying control. The machine can be viewed and tested, and a video was made of its operation.
5
Arburg plasticising unit IU1300, Ø 70 mm
Bytjr3rtw
- removed from running machine
- fully functional
- stroke volume: 904 cm³
- injection pressure: 1470 bar
- moulded part weight max. PS: 826 g
- cylinder E: 70.04 mm A: 70.02 mm
- screw: E: 69.80 mm A: 69.80 mm
manufacturer: Arburg
type: IU1300
5
screw size:35 mm
injection shot weight in Polysterol:105 g/PS
closing pressure:350 kN
daylight:270 x 270 mm
opening stroke:200 mm
mould height - Max./min.:150-350 mm
control:Selogica
daylight between platens - max.:380 x 380 mm
total power requirement:25 kW
weight of the machine ca.:2,6 t
dimensions of the machine ca.:3,60 x 1,30 x 2,10 m
operation hours pump: about 19.341
operation hours automatic: about. 17.254
version Hi drive
- highly wear-resistant plastification unit
- Reinforc...
9
Control Unit
Brand Arburg
Clamping Unit
Clamping force 600 kN
Media
Main electronic connection 400 V 3 - 50 Hz
This Arburg ALLROUNDER Centex 370 C 600 - 200 Injection Moulding Machine was built in Germany in the year 1995. It is equipped with a control unit of the same brand. This machine works with clamping force 600 kN.
Application Types
Injection Moulding
Qdrmt
9
ARBURG 570 C 2000 - 675 servo
Clamping force: Ton 220 (Arburg increased to 220t)
Distance between tie bars: 570 x 570 mm
Mould height min/max: 300-950 mm
Screw dia: 45 mm (servo screw drive)
Volume 286 cm³
Shot weight: 291 g /PS
Pressure 2470 bar
Air blow: 1
Core puller: 1
Cooling circuids: 4
Motohours 43848
Year 2004 CE
Machine Highlighs:
- Hydraulic pumps regulated by SERVO - energy saving (AES energy saving system)
- Screw with position requlation
- Electrical feeding
- Mechanical quick clamp...