Used Arburg A 220 90 350 Art 585 for sale (353)

Year of construction: 1988, Condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Npqtztfsb Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Year of construction: 1983, Condition: ready for operation (used), Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation. Oyjpupq

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 Year 1997 Closing 35 TO Scrow 25 mm Hdtiz9T Bar spacing 27x27

Year of construction: 1997, Condition: excellent (used), Arburg 270 M-350-90 U Closing 35 TO year 1997 Cahvvdkvw Scrow 25 mm tie bar spacing 27x27

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Cuvobs0Zem Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2008, Operating hours: 68,490 h, Clamping force: 1,500 N, Screw diameter: 45 mm, For sale 150 t 2K injection moulding machine with rotary table. Both aggregate size D=45mm. B3N0Jwbt3I

Year of construction: 2006, Operating hours: 68,000 h, Condition: excellent (used), First screw - 1300 Screw diameter horizontale : 55 mm - Shot volume : 558 cm3 Injection pressure : 2380 bar Second screw - 350 Screw diameter verticale : 35 mm Shot Volume : 154 cm3 Injection pressure : 2500 bar Chnlfzqklq Bettween tie bar : 630 x 630 mm Unité rotative :ARBURG année : 2012 2 corepulling Interface robot 68000 working hours

Condition: used, Year of construction: 2007, Operating hours: 72,184 h, Functionality: fully functional, Machine/vehicle number: 207220, Clamping force: 1,500 N, Screw diameter: 45 mm, Input current: 143 A, For sale good condition 2K injection moulding machine with rotary table. Dpgwtb

Condition: reconditioned (used), Year of construction: 2001, Clamping force: 1,000 N, Screw diameter: 40 mm, Total height: 3,400 mm, Injection pressure: 2,120 bar, Overall weight: 3,430 kg, Pressure: 2,210 bar, Total length: 4,300 mm, Total width: 1,595 mm, Power: 30 kW (40.79 HP), Awaiting to be refurbished at our site in Wellingborough is this Arburg 420C twin shot injection moulding machine, it has both a vertical and horizontal injection unit with a 40mm horizontal plasticising unit and a 30mm vertical injection unit, comes with rotating platen. This machine has a Selogica controller and is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Gxcycxy Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2004, Operating hours: 33,700 h, Functionality: fully functional, Clamping force: 800,000 N, Screw diameter: 45 mm, Total height: 2,100 mm, Injection pressure: 1,670 bar, Overall weight: 3,800 kg, Total length: 4,000 mm, Total width: 1,400 mm, Displacement volume: 230 cm³, Ejector force: 40,000 N, Type of input current: three-phase, Ejector stroke: 150 mm, Clearance between the columns: 370 mm, Plate width: 570 mm, Plate length: 570 mm, Clear span: 700 mm, Input frequency: 50 Hz, Input voltage: 400 V, injection moulding machine ARBURG Allrounder 370 S 800-350 warehouse no.: 503399 manufacturer: ARBURG type: Allrounder 370 S 800-350 controller: Selogica year of construction: 2004 operation hours: 33700 h technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 370 x 370 mm size of mould plates h x v: 570 x 570 mm min. mould height: 250 mm Uh2Upcxmij max. open daylight: 700 mm opening stroke: 450 mm ejector stroke: 150 mm ejector force: 40 kN technical data injection unit screw diameter: 45 mm swept volume: 230 ccm injection pressure: 1670 bar screw length: 20 l/d plasticising rate: 168 g/s PS nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4m x 1.4m x 2.1m total weight: 3800KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A vario injection unit mould heating 2x

Year of construction: 1996, Condition: ready for operation (used), General Data Machine weight 4500 kg Injection Unit Screw diameter 35/40/45 mm Shot weight 194 g/hp Injection pressure 2500/2050/1650 bar Clamping Unit Clamping force 1300 kN Opening stroke 500 mm Distance between bars 420x420 mm Uic2Ob80Vz Mould height min 250 mm Size of mold platens 615x615 mm Ejector stroke 175 mm Ejector force for / back 40 kN This Arburg 420C-1300-350 was manufactured in 1996. A robust injection moulding machine featuring a clamping force of 1300 kN and a screw diameter range of 35/40/45 mm. It supports a mould weight up to 600 kg and has a mould installation height of 250 mm. Ideal for precise and efficient production, the Arburg 420C-1300-350 machine we have for sale is a valuable addition to any manufacturing setup. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1998, Machine/vehicle number: 173657, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Arburg Type: Arburg 420 C 1000-350 Jubilee Condition: aus laufender Produktion Operating hours: ca. 117.000 CLAMPING UNIT: - Clamping force: 100 t Opening path: 500 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 420 x 420 mm Plate dimension (h x v): 570 x 570 mm Centering (fix- movingplate): 125 /125 mm INJECTION UNIT: IU350 Screw diameter: 40 mm Injection weight in polystyrol: 153 g Stroke volume: 182 cm³ Injection pressure: 2.120 bar CONTROL: Selogica Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: ja / yes Hot runner control devices: - Robot interface: Euromap 12 Other equipment: Schnittstelle Temperiergerät GENERAL DATA: - Installed heating capacity: 11,9 kW Pump drive power: 22,0 kW Total installed power: Motor + Heizung Total weight: 3.430 kg C2R90It9 Total size L x B x H: 4,4 x 1,7 x 2,1 m

Condition: used, Year of construction: 2001, - Clamping force: 200 tons - Distance between tie bars: 570 x 570 mm - Ejector path: 176 mm - Mold height min./max. : 600 mm x 1250 mm - Screw diameter1: 35 mm - Screw diameter2: 30 mm - Injection volume 1: 134cm3 3Qcbg - Injection volume 2 :74 cm3 - Cores: 2x - Linear robot Arburg - L x W x H: 5,4 m x 1,6 x v 2,1 m, weight 8 ton

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Ue0Hkwymcl year of construction: 2000 Auger: 45mm Core pulls: 1x hot runner: 6x incl. conveyor belt

Condition: repair required (used), Year of construction: 1999, Operating hours: 75,000 h, Due to lack of space, we are selling or exchanging our 2K injection molding machine for a grinder or a few conveyor belts at a very low price. Screw diameter of the horizontal injection unit 40 mm Injection volume 182 ccm Screw diameter of the vertical injection unit 35 mm Injection volume 106 ccm Clamping force 1000 kN Distance between tie bars 420 x 420 mm Min. mold installation height 250 mm C92Ghca Mold opening stroke 500 mm Max. Platen distance 750 mm However, maintenance and sealing must be carried out during production (injection unit).

Condition: good (used), Year of construction: 2003, Operating hours: 48,000 h, Functionality: fully functional, Clamping force: 1,500,000 N, Screw diameter: 40 mm, Total height: 2,180 mm, Overall weight: 4,410 kg, Total length: 4,470 mm, Total width: 1,670 mm, Displacement volume: 182 cm³, Ejector force: 66,000 N, Type of input current: three-phase, Ejector stroke: 225 mm, Clearance between the columns: 470 mm, Plate width: 650 mm, Plate length: 650 mm, Clear span: 750 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 48000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Dps8Hr Anti vibration mounts mould heating 6x

Condition: excellent (used), Year of construction: 2000, Operating hours: 55,530 h, Functionality: fully functional, Machine/vehicle number: 180310, Technical data - 2 screws Ø 30mm each for 2K injection - Clamping force: 1,000 kN - Heating: 10.2 / 9.4 kW - Closing force: 50 kN - Opening stroke: max. 500mm - Distance between clamping platens: max. 750 mm - Clear column distance: 420 x 420 mm - Moving mold half weight: max. 600 kg - Ejector force: max. 40 kN - Ejector travel: max. 175 mm . . Condition - Very good, year of construction 04/2000 - Special paint black/red - Location: In clean development center - Serviced and documented every six months - Including machine documentation from Arburg - Machine is under power and can be inspected at short notice - 4,508,425 machine cycles / 55,530h pump / 44,470h automatic operation - Machine was most recently used for development projects and sampling . . Price B8A3Yypyqw - 16,500 EUR net - Including conveyor belt, without Digicolor accessories . . Offer details - Collection in 35066 Frankenberg (Eder) - Used machine, sale exclusively to trade - No return, sale under exclusion of liability for material defects - Technical data according to Arburg documentation, non-binding - Purchase according to unprocessed photos or on-site inspection .

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. Dpqojd It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2010, Arburg universal machine possible to use in Horizontal also Vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Eha3J2Ug2 Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 2+5 Heating zones: 12 Hours: 31.000 only!

Condition: good (used), Year of construction: 2003, Operating hours: 47,000 h, Functionality: fully functional, Clamping force: 1,500,000 N, Screw diameter: 40 mm, Total height: 2,180 mm, Overall weight: 4,410 kg, Total length: 4,470 mm, Total width: 1,670 mm, Ejector force: 66,000 N, Type of input current: three-phase, Ejector stroke: 225 mm, Clearance between the columns: 470 mm, Plate width: 650 mm, Plate length: 650 mm, Clear span: 750 mm, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503294 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 47000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german CEE-socket 16A Bdjkzwm38 core pulling hydraulically 2x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Cuvdzynnq8 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2003, Operating hours: 503,293 h, Clamping force: 1,500,000 N, Screw diameter: 40 mm, Total height: 2,180 mm, Total length: 2,180 mm, Total width: 1,670 mm, Displacement volume: 182 cm³, Ejector force: 66,000 N, Type of input current: three-phase, Ejector stroke: 225 mm, Clearance between the columns: 470 mm, Plate width: 650 mm, Plate length: 650 mm, Clear span: 750 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ARBURG Allrounder 470 C 1500-350 warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h technical data clamping unit clamping force: 1500 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 225 mm ejector force: 66 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw stroke: 145 mm nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 4.47m x 1.67m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Dps7Qn Anti vibration mounts mould heating 6x

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1000-350 / Very good technical condition Year of manufacture: 2002 injection unit: Screw diameter: 40 mm injection weight: 153 g injection pressure: 2120 bar Metering volume: 182 ccm Cuvb8Fciqk Clamping unit : clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 10 Injection unit hardened - bimetal The machine is integrated with the original conveyor belt of the Arburg brand Built-in sorting flap Dimensions: Weight: 3430 kg Length/width/height: 4.35x1.64x2.08 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2006, Operating hours: 34,721 h, Functionality: fully functional, Clamping force: 1,600,000 N, Screw diameter: 40 mm, Total height: 2,880 mm, Injection pressure: 2,120 bar, Overall weight: 12,600 kg, Total length: 5,580 mm, Total width: 2,250 mm, Displacement volume: 182 cm³, Installation height: 600 mm, Ejector force: 46,000 N, Type of input current: three-phase, Ejector stroke: 150 mm, Input voltage: 400 V, Rotary table diameter: 1,500 mm, Equipment: Documentation/Manual, injection moulding machine ARBURG Allrounder 1500T 1600-350 vertical warehouse no.: 503413 manufacturer: ARBURG type: Allrounder 1500T 1600-350 controller: Selogica year of construction: 2006 operation hours: 34721 h technical data clamping unit clamping force: 1600 kN distance between tie-bars h x v: 1500 x mm min. mould height: 600 mm max. open daylight: 900 mm opening stroke: 300 mm round table diameter: 1500 mm ejector stroke: 150 mm ejector force: 46 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit C0Iotvtwws screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar screw length: 20 l/d screw speed: 53 min screw torque: 640 N nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 5.58m x 2.25m x 2.88m total weight: 12600KG equipment included screen text german CEE-socket 16A rotary table Cascade control hydraulically 4x core pulling hydraulically 2x machine with rotary index table machine incl. water flow regulator machine without material hopper Schuko-socket 10A mould heating 12x

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Dpqn72 injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request