4
Stand drilling machine, thread cutting machine, make Arboga, type G 2508
-Table size 280 mm
-spindle holder MK3
Bimiu79uqp
-speeds 100-2900 rpm
-Weight approx. 150 kg
5
Technical data:
Iotgmri9
- Drilling capacity in steel ST 60 25 mm
- Drilling spindle holder MK 3
- 8 drilling spindle speeds 100 - 2700 rpm
- drill spindle stroke 130 mm
- 4 feeds 0.1 - 0.3 m/rev
- Overhang 270 mm
- Column diameter 115 mm
- drilling unit + table height adjustable
-with crank handle over rack
- Table dimension 350 mm
- Drive 400 V / 0.8 / 1.1 kW
- Space requirement approx. W 800 x H 1850 x D 900 mm
- Weight approx. 250 kg
5
Drill press, drill press, stand drill, pillar drill
-Table size: 430 x 615 mm
-spindle taper: MK4
-Projection: 365 mm
-Speeds: 63-800 rpm
-Spindle stroke: 195 mm
-Transmission
-Feed: 0.1-0.4 mm/rev
Bcszqvwkfp
-Water cooling
-Dimensions: 730/1040/H2640 mm
-Weight: 1026 kg
15
Radial drilling machine, drilling machine
Brand: Arboga Askina, Sweden
Type: Arboga Askina
Control: Siemens Logo! 24 volts
The machine was overhauled and modernized in 2012.
The entire electrical system was renewed and a Siemens logo! Control installed with all safety-relevant components.
A professional circuit diagram was created for this purpose - is available.
Outreach: 650 mm
Clamping area: 500 x 400 mm
Side clamping area: 500 x 300 mm
Cdbwqi8kje
Clamping area below: 950 x 620 mm
Height tr...
10
bore capacity in steel (diameter) 35 mm
throat 295 mm
bore stroke 200 mm
taper MK 4 MK
table-size 500 x 400 mm
feeds 01-0,16-0,25-0,4 mm/U
turning speeds 61 - 1645 U/min
total power requirement 1,9 KW
weight of the machine ca. ß,32 t
dimensions of the machine ca. 0,9 x 0,6 x 2,2 m
Automatic feed
E3mjlbm
thread cutting device
foot pedal
table rotatable
6
Technical Details !
- Capacity - 2.000 kg
Mxfsxc
- Width of spool - 90 cm
- Year - 2001
- El. Power - 50 kw
3
drilling capacity steel/GG: 50/60 mm
spindle taper: 5 MK
arm length: 400 mm
table size: 700 x 600 mm
spindle sleeve stroke: 275 mm
spindle turning speed range: 32 - 1030 rpm
T78ru3kg
carriages: 4: 0,1 - 0,4 mm
engine: 380 V, 2,2/3,7 kW
space needed: 700 x 1200 x 2700 mm
weight: 1240 kg
6
Heavy gear box column drilling machine make ARBOGA type GSMH 4508
Make # 15641
Technical data:
Spindle mount MK 4
drilling capacity in steel 45 mm
table size 430 x 615 mm
throat depth 365 mm
spindle stroke 195 mm
Ne7undam
4 automat. feeds 0,10 - 0,40
8 spindle speeds 63 - 800 rpm
drive power 3,3/ 2,2 kW
outer dimensions L x W x H 730 x 1040 x 2640 mm
Weight 1026 kg
with
- thread cutting device
- coolant pump (without tank)
used
7
Technical data:
- Drilling capacity 30 mm
- tapping capacity M 18
- Drilling spindle holder with union nut MK 3
B92i3lqrdi
- Drilling spindle speeds 100 / 325 / 470 / 1590 rpm
- 195 / 660 / 950 / 3200 rpm
- drilling - milling unit motorized height adjustable
- smallest / largest distance table / drilling - milling spindle 50 / 515 mm
- drilling spindle stroke 200 mm
- spindle fine stroke adjustment by hand wheel
- drilling spindle throat 320 mm
- Drill milling unit left + right each...
6
Manufacturer ARBOGA EM 825
machine weight: approx. 300 kg
spindle speed: 100 - 1280 rpm
x-travel: 400 mm
y-way: 155 mm
total power requirement: 0,66/ 0,48KW
throat: 260 mm
spindle admission: ISO3
space requirement: approx. 0,75 x 0,90 x 1,60 m
table size: 565 x 245 mm
Bbsw22cse
drilling capacity in steel (diameter): 25 mm
Operating voltage: 400 V
spindle sleeve stroke vertical: 110 mm
9
Offer 22117
Technical data:
- Drilling capacity 30 mm
- tapping capacity M 18
- Drilling spindle holder with union nut MK 3
- Drilling spindle speeds 100 / 325 / 470 / 1590 rpm
- 195 / 660 / 950 / 3200 rpm
- drilling - milling unit motorized height adjustable
- smallest / largest distance table / drilling - milling spindle 50 / 515 mm
- drilling spindle stroke 200 mm
- spindle fine stroke adjustment by hand wheel
- drilling spindle throat 320 mm
- Drill milling unit left + right eac...
6
Heavy gear box column drilling machine make ARBOGA type GSMH 4508
Plvpt
Technical data:
Spindle mount: MK 4
drilling capacity in steel: 45 mm
table size: 430 x 615 mm
throat depth: 365 mm
spindle stroke: 195 mm
4 automatic feeds: 0,10 - 0,40
8 spindle speeds: 63 - 800 rpm
drive power: 3,3 / 2,2 kW
external dimensions: L 700 x W 1040 x H 2640 mm
Weight: 1026 kg
Used Arboga u 2508
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
10 valuable tricks for buying used machines online
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
Photo gallery: The World's 10 biggest excavators
