11
Arburg 270 M-350-90
Year 1997
Closing 35 TO
Hdtiz9t
Scrow 25 mm
Bar spacing 27x27
11
Here we offer a maintained injection molding machine.
Manufacturer: Arburg
Type: 270C 400-100
Control unit: Selogica
Year of manufacture: 2001
Operating hours: 55849 h
Extras
- core pull
- Robot interface
- Screw high wear resistant
- Blow out device
- blow out unit
- Cooling water distribution
- CF drive
- complete documentation and software (on CF card)
German language
- from first owner - origin Germany
constant maintenance by the manufacturer and previous owner
clamping unit
clamping f...
5
screw size:35 mm
injection shot weight in Polysterol:105 g/PS
closing pressure:350 kN
daylight:270 x 270 mm
opening stroke:200 mm
mould height - Max./min.:150-350 mm
control:Selogica
daylight between platens - max.:380 x 380 mm
total power requirement:25 kW
weight of the machine ca.:2,6 t
dimensions of the machine ca.:3,60 x 1,30 x 2,10 m
operation hours pump: about 19.341
operation hours automatic: about. 17.254
version Hi drive - ENERGY SAV'ING MODELL
- highly wear-resistant plasti...
4
Manufacturer: Arburg
Machine type: 270 S 350- 60 with parting line device
Year of manufacture: 12 / 2001
Control: Selogica
Operating hours auto.: 21.600 h
Cgry2cl7k3
Clamping force: t 35
opening stroke: mm 325
installation height min.: mm 200
distance between platens: mm 475
tie bar spacing: mm 270 x 270
Screw Ø: mm 25
Screw length L/D 17,5
Stroke volume: ccm 39
Injection part weight: g/PS 36
Max. injection pressure: bar 1,810
Dimensions : m 3.3 x 1.3 x 2.0
Weight (without oil): kg 2.200
V...
5
General Data
Machine weight 2230 kg
Clamping Unit
Clamping force 500 kn
E9bzqvn
Media
Main electronic connection 400 V3 - 50 hz
This Arburg ALLROUNDER Centex 270 C 500 - 250 Injection Moulding Machine was built in Germany in the year 1999. It is equipped with a control unit of the same brand. This machine works with clamping force 500 kN.
Application Types
Injection Moulding
4
Clamping force: 35 tons
Distance between tie bars: 270 x 270 mm
Plate dimensions: 472 x 472 mm
Screw diameter: 22 mm
Injection volume: 20 cm3
Shot weight: 18 g (PS)
Vv73b3
Injection pressure: 2500 bar
8
Arburg injection moulding machine type Allrounder 221M, year of manufacture 1996.
Ce2yy2qbmo
This machine was used for testing new products and small series. The machine can also spray vertically on partial seams, all necessary parts are included in the scope of delivery, as well as the Geiger handling and a stainless steel hopper. Not included in the scope of delivery is the granulate dryer, included stainless steel funnel.
The machine can be inspected until week 43 2022, when it will be repla...
3
screw size 25 mm
injection shot weight in Polysterol Thermoplast 25 g/PS
closing pressure 250 kN
daylight 270 x 270 mm
opening stroke max. 325 mm
mould height - Max./min. 225 mm
daylight between platens - max. 550 mm
control Multronica
total power requirement 23 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 3,70x1,75x1,95 m
belt convoyer
machine hours: 22.255 h
Ehgmod7
7
Machine number: 174862
Type / Model: 270-250-60
Operating hours:
Clamping force: 25 t
Opening stroke: 250 mm
distance between columns: 270 x 270 mm
clamping platens: 400 x 400 mm
screw diameter: 22 mm
Dwhudz9x
max. metering volume: 30 cm³
injection weight PS: 25 g
clamping force:
Connection: 35 kW
Accessories/equipment:
Condition: good
weight: 1,9 t
dimensions: 3.200 x 1.100 x 1.800 mm
3
Closing force: 350kN, max. opening path: 325mm, max. tool installation height: 225mm, length: 3600mm, width: 1200mm, height: 2800mm, weight: 1.8t, including documentation.
Celnivspt2
1
Plastic injection molding machine for sale
ARBURG 270 C
year of production 1996
auger-screw fi 35
120 gr
Motor-engine 18kw
Imported from Germany, excellent condition.
Nbg0tl
Please be free to contact us for more information.
1
Manufacturer: Arburg
Type of machine: 270 C - 500 - 100 U
Year: 1997
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Dialogica
Screen text: German
Operating hours: 14.224 Hrs
Price: on request
Technical details
Clamping unit
Clamping force: 500 kN
Mould opening force, max.: 130 Kn
Size of mould platens (h x v): 405 x 405
Distance between tie bars (h x v): 270 x 270
Mould opening stroke: 350
Mould height min.: 200
Max daylight: 55...
8
Machine number: 171764
Type / Model: 270-350-60
Operating hours:
Clamping force: 35 t
Opening stroke: 250 mm
2urodu
distance between columns: 270 x 270 mm
clamping platens: 400 x 400 mm
screw diameter: 22 mm
max. metering volume: 34 cm³
injection weight PS: 31 g
locking force:
Connection: 35 kW
Accessories/equipment:
Condition: good
weight: 2 t
dimensions: 3.200 x 1.100 x 1.800 mm
5
Clamping force: 250kN, distance between tie-bars: 270x270mm, operational hours counter: 86,521h, the controls are defective, but still functional.
Ca2t3i82ee
1
Manufacturer: Arburg
Type of machine: 270 C - 500 - 100
Year: 1997
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Oaaar
Controlversion: Dialogica
Screen text: German
Operating hours: 89.971 Hrs
Price: on request
Technical details
Clamping unit
Clamping force: 500 kN
Mould opening force, max.: 125 Kn
Size of mould platens (h x v): 405 x 405
Distance between tie bars (h x v): 270 x 270
Mould opening stroke: 350
Mould height min.: 200
Max daylight:...
2
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
By87dwvxno
1
Clamping Force: 250 kN
Mould Opening Force (max): 14 kN
Mould Opening Stroke: 275 mm
Mould Height (min): 200 mm
Max Daylight: 475 mm
Hydraulic Ejector - stroke: 90 mm
Ejector Force Forward/Backward: 15 kN
Screw Diameter: 22 mm
Ls/D Ratio: 20
Injection Pressure: 2000 bar
Stroke Volume: 30 ccm
Shot Weight, PS: 25 g
Injection Rate: 30 cm³
Injection Stroke: 80 mm
Screw Speed: 1/min
Nozzle Pressure: 30 kN
Installed Heating Capacity: 2.7 kW
Ed3og2rho
Working hours: 93.000
3
1,0 St. gebr. Spritzgießmaschine
Hersteller: ARBURG
Typ: 270S250-60
Baujahr: 1997
Schließkraft: 25 Tonnen
Go30duth
Holmabstand 270 x 270 mm
Schneckendurchmesser: 22 mm
Spritzteilgewicht in PS: 18 g
Steuerung: SELGOCIA
Ausstattung:
-1 x Kernzug
4
Arburg 270C 400-100
Year of manufacture: 2005
injection unit:
Screw diameter: 30 mm
injection weight: 65 g
Injection pressure: 1390 bar
Metering volume: 71 ccm
Clamping unit:
Clamping force: 40 t
tie bar distance: 270x270 mm
size of clamping platens: 446x446 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Very good technical condition
Machine has produced molded parts for medical industry - pure production conditions
core pull control
injection u...
Catalog No. : 6248
Type: A 270S-350-60
Producer: Arburg
Made in: 2001
Characteristic:
Clamping force: 35 t
2uwhbm
Screw diameter: 22 mm
Injection capacity: 30 cm³
Injection weight: 27 g
Maximum injection pressure: 2340 bar
Min. Mold height: 175 mm
Equipment:
Spare parts
Technical books
It has over-sealed hydraulic blocks. partial replacement of hydraulic hoses
Integrated side picker
Integrated sorting flap
4
Rated current: 59A, connected load: 45kW.
Guevdnmq8
15
Arburg Allrounder 270M 500-210 injection molding machine Injection molding machine
Clamping force: 500 kN
2uus3u
tie bar distance: 270mm
Cylinder diameter: 30mm
Heating power: 5,1 kW
Engine power: 15 kW
High conveyor with paint mixer
Extensive accessories / spare parts for the machine.
Description was taken over.
More pictures on request.
You are welcome to come by for a viewing.
You will receive a proper invoice.
For foreign customers can also be a net invoice. Prerequisite is a val...
4
Clamping force 50 t
Thermoplastic cylinder 25 mm
Cffby0ivza
Open nozzle 30 mm
Condition: unknown, should be funtional, bought in the past in a machine package and never run in production than.
Sale in state as is.
2
1,0 St. gebr. Spritzgießmaschine
Hersteller: ARBURG
Typ: 270S350-60
Baujahr: 1998
Schließkraft: 35 Tonnen
Holmabstand 270 x 270 mm
Cghov2ig2b
Schneckendurchmesser: 22 mm
Spritzteilgewicht in PS: 18 g
Steuerung: SELGOCIA
Ausstattung:
-1 x Kernzug
1
Arburg 270U 250-70 with the sprue picker
Year of manufacture: 2006
injection unit:
Screw diameter: 25 mm
injection weight: 40 g
Injection pressure: 1550 bar
Metering volume: 44 ccm
Clamping unit:
clamping force: 25 t
tie bar distance: 270x270 mm
size of clamping platens: 380x380 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap 67
Robot interface
Injection unit hardened - bimetal
proportional valve on the injection unit - precise injection
...
9
Clamping force: 500 kN
Mould opening force, max.:35 kN
Size of mould platens (h x v): 446 mm x 446 mm
Distance between tie bars (h x v): 270 mm x 270 mm
Mould opening stroke: 350 mm
Mould height min.: 225 mm
Max daylight: 575 mm
Hydraulic ejector - stroke: 125 mm
Ejector force forward/backward: 30 kN
Injection unit
Screw diameter: 25 mm
Ls/D ratio: 24
Injection pressure: 2500bar
Stroke volume: 54 ccm
Shot weight, PS: 49 g
Injection rate: 56 ccm/s
Injection stroke: 300 mm
Cqnlrdt0
...
8
Arburg 270C-500-100 (138)
without hopper, with sorting flap, bimetallic barrel
Year of production: 2000
Brand: Arburg
Technical data
Shot Weight: 26 g
Clamping Force: 500 kN
Screw dia: 20 mm
Injection pressure: 2500 bar
Tie bar distance: 270 x 270 mm
Platen size: 446 x 446 mm
Mould height min.: 200 mm
Type of controls: Selogica
Language: German
Prsnr
Power: 19,9 kW
Workinghours: 87858 h
Weight: 1980 kg
Dimensions: 3,8 x 1,7 m
Hopper: No
Core pull: Yes
Air valve: Yes
Heating channels: Yes
6
Clamping force: 350kN, screw diameter: 30mm, injection pressure: 1550bar, dosing volume: 70cm³, heating output: 4.9kW, connected load: 15.9kW, weight: 1.98t, pump/ automatic operational hours counter: 57,840/ 51,147h, additionally available is a Handling GEIGER MidiLinear 3.0, year of construction: 2013.
Cdd7okkplf
4
Arburg 270C 400-70 Golden Edition
Clamping force: 40 Tonns (400KN)
Screw size: Ø22mm
Year of manufacturing: 2017/5
C3kzxtik
Working hours: 2076
3
Arburg 270S 250-60
Year of manufacture: 1998
injection unit:
Screw diameter: 22 mm
injection weight: 25 g
Injection pressure: 2340bar
Dosing volume: 30 ccm
Clamping unit:
clamping force: 25t
tie bar distance: 270x270 mm
size of clamping platens: 400x400 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Core pull x1
Injection unit made of bimetal
Proportional valve on the injection unit
Ccwbn79
Dimensions:
Weight: 1900 kg
Length/width/height: 2.89x...
15
Arburg 270C-400-250 + robot Multilift and conveyor belt, bimetallic barrel
(3)
Year of production: 2004
TECHNICAL DATA
Screw Dia [mm]: 30
Shot Weight [g]: 97
Injection Pressure [bar]: 2470
Clamping Force [kN]: 400
Tie Bar Distance [mm]: 270x270
Platen Size [mm]: 446x446
Mould Height min. [mm]: 200
CONTROL
Type of Controls: Selogica
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Power [kW]: 18,4
Workinghours [h]: 75000
Dimensions [m]: 4 x 2,2
Weig...
5
There are two identical injection moulding machines available.
Qpn9v
6
Arburg 270S 250-60
Year of manufacture: 1998
Cgdml7eifz
injection unit:
Screw diameter: 25 mm
injection weight: 33 g
Injection pressure: 1810 bar
Metering volume: 39 ccm
Clamping unit:
clamping force: 25 t
tie bar distance: 270x270 mm
size of clamping platens: 400x400 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Control with air valve
Core pull control
Control with hot runners
Injection unit hardened - bimetal
Built-in conveyor belt and sortin...
8
Arburg 270C-300-100 (165)
Product Code: 165
Availability: In Stock
Year of production: 1998
Brand: Arburg
Technical data
Shot Weight: 45 g
Clamping Force: 300 kN
Screw dia: 25 mm
Injection pressure: 2240 bar
Tie bar distance: 270 x 270 mm
Platen size: 446 x 446 mm
Mould height min.: 200 mm
Caen9e2ksw
Type of controls: Selogica
Language: German
Power: 12,4 kW
Workinghours: 60701 h
Weight: 1980 kg
Dimensions: 3,7 x 1,6 m
Hopper: No
Core pull: Yes
Air valve: Yes
2
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
Hgswxsv
1
ARBURG 270S 250-60
Year of manufacture: 1997
injection unit:
Screw diameter: 18 mm
injection weight: 17 g
Injection pressure: 2500 bar
Dosing volume: 20 ccm
clamping unit:
clamping force: 25 t
tie bar distance: 270x270 mm
size of clamping platens: 400x400 mm
ejector: hydraulic
clamping unit: hydraulic
Cmqgfdjw
Control system: SELOGICA
Additional equipment:
Euromap 12
Robot interface
Air valve x2
Hydraulic core pull x2
Control with hot runners x 6
Injection unit hardened - bimetal
Proportiona...
