Used Arburg A 270 90 350 Vertikal U Art 619 for sale (319)

Condition: excellent (used), Year of construction: 2006, Arburg 270 U 350-100U (2006) Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 1+2 Heating zones: 3 Low hours: 54.000 Iislhsvdu Dgoccqlsc

Condition: refurbished (used), Functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person. Iiolhccqewqnggeljc

Year of construction: 2011, operating hours: 20,000 h, Condition: ready for operation (used), Injection Unit Screw diameter 30 mm Stroke volume 85 cm³ Injection pressure 2000 bar Additional Equipment Machine handling is included. This Arburg Allrounder 270 H 350-70 was manufactured in 2011. It features a screw diameter of 30 mm, a maximum injection pressure of 2000 bar, and a nozzle lift-off stroke of 210 mm. With 20,000 operating hours, this hydraulic injection moulding machine includes machine handling. Consider the opportunity to buy this Arburg Allrounder 270 H 350-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Isljwq Tlhshccqljic

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, opening stroke: 300 mm, pressure: 2,500 bar, For sale is an injection molding machine of the brand Arburg and type 270 U 400-70. Iolhjwm Dvioccqlsic The machine comes from a clean operation and is fully functional after installation. Technical data: Operating hours: 75,900 h Year of manufacture: 2006 Clamping force: 400 kN Minimum mold installation height: 200 mm Maximum opening stroke: 300 mm Maximum platen distance: 500 mm Clear column distance: 270x270 mm Screw Ø: 25 mm Maximum injection pressure: 2500 bar Dimensions: approx. 3,000*1,000*1,600 mm Net weight: approx. 1915 kg Transport and loading can be organized on request, at an additional cost. Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Year of construction: 1988, Condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Iislhccobqi Tbsqlsc Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Year of construction: 2000, Condition: excellent (used), Injection moulding machine Arburg 221 K 350 - 100 U Year of manufacture: 2001 Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min. 150 mm - 300 mm Maximum opening distance: 200 mm Max distance between plates: 500 mm Iiolhccep At Rdjqlsc Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2500 bar GENERAL DATA Engine: 7.5 kW Heaters: 4.5 kW Operating hours: On request Dimensions L x W x D: 2.7 m x 1.4 m x 2.2 m Weight: 1060 kg

Condition: good (used), Year of construction: 1995, operating hours: 104,536 h, Functionality: fully functional, machine/vehicle number: F40, clamping force: 400 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 5,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 63 A, Machine is currently in use. Can be viewed in operation. Iielhjvrftboccqlec

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO year 1997 Scrow 25 mm Iijlhccqeg S I S Ajljc tie bar spacing 27x27

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Iislhccqjwt Em Nsljc Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2012, Arburg 370 S 700-290 U (2012) 1. Clamping force : 70 tons Islowp I Dijhccqlsic 2. Screw diameter: 35 mm 3. Injection volume: 144 cm³ 4. Shot weight (PS): 132 g 5. Injection pressure: 2000 bar 6. Screw L/D ratio: 20:1 7. Number of heating zones: 12 8. Nozzle retraction stroke: 240 mm 9. Tie bar spacing (H × V): 370 × 370 mm 10. Platen dimensions (H × V): 510 × 510 mm 11. Minimum mold height: 200 mm 12. Maximum daylight: 600 mm 13. Opening stroke: 400 mm 14. Ejector stroke: 125 mm 15. Ejector force: 30 kN

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Iislst E Tq Djhccqlsc

Year of construction: 2007, operating hours: 72,912 h, Condition: ready for operation (used), This Arburg 470 U / 800-290 was manufactured in 2007. A hydraulic injection moulding machine featuring an Arburg Picker and a clamping force of 80 tons. It has accumulated 72,912 operating hours, indicating extensive use but maintained functionality. Consider the opportunity to buy this Arburg 470 U / 800-290 hydraulic injection moulding machine. Contact us for more information. Iielhcewp Urgecqlsc Application Types Injection Moulding

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Pump set consisting of three pumps 2 pieces - MOOG Mod D955Z8001/H Type HZ-R 18A1-RKP080KM28R1Z00DS1 Ielev Tuvnehccqloic V = 80 cc P = 280 bar n max = 1800 rpm ARBURG Type: A10VS0 18 DFR1/31R-VRA12KB2 V = 18 cc DR = 260 bar n = 1450 rpm

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements width 2100 mm Ijlhccswr N Izoqljic Measurements depth 4600 mm Measurements height 2700 mm Machine weight 7000 kg Main Drive Spindle speed range 15000 rpm Table Table load 2000 kg This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2008. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 820 S 4000-1300/350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Application Types Injection Moulding Ijlhccswr N I Ijqljic

Condition: excellent (used), Year of construction: 2006, Arburg 470S 1300-350, year 2006 Injection Molding Machine, new hydromotor Clamping force 130 t Screw 35 mm Shot weight 127 g/PS Ijlhcevi Rzxecqljic Distance between colums 470x470 mm Effective screw length: 23 L/D Screw travel 145 max. mm Calculated stroke volume 139 max. cm3 Injection pressure 2500 max. bar Injection flow 128 3/s Back pressure positive/negative 350/160 Screw circumferential speed 47 max. m/min Screw torque 560 max. Nm - Nozzle bearing force 55 max. kN - Nozzle lifting stroke 300 max. mm - B x H 650 x 650 mm - Weight 5500 kg, L x W x H: 550 cm x 150 cm x 235 cm - in production untill 05/2024 Condition: fully funtional - Video available on request. 3x hydraulic core pull - system is in Czech language Machine has brand new hydromotor!

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 470C1500-675 Baujahr: 2004 Schließkraft: 100 Tonnen Holmabstand 470 x 470 mm Schnecken DN: 50 mm Iijlswqpvpjhccqloc Dosiervolumen: 353 ccm³ Spritzteilgewicht 297 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: GEIGER, BJ 2004 -2 x Kernzug

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Ijlhswp Uqieccqleic Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2004, clamping force: 1,300 kN, screw diameter: 50 mm, injection pressure: 1,360 bar, injection weight: 243 g, Arburg 420C-1300-350 (172) the machine is sold without conveyor belt Product Code: 172 Availability: In Stock Year of production: 2004 Brand: Arburg Technical data Shot Weight: 243 g Clamping Force: 1,300 kN Screw dia: 50 mm Injection pressure: 1360 bar Ieljvupq Ajhccqlsic Tie bar distance: 420 x 420 mm Platen size: 605x605 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 81.110 h Weight: 4080 kg Dimensions: 4,4x1,9 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Iielhccqswp Huaoloc Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Iiolsrrn U Tshccqljc Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 34.748

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 3800 kg Iielhccqjwn Ny Njloc Injection Unit Screw diameter 145 mm Clamping Unit Clamping force 800 kN Opening stroke Max. 450 mm Distance between bars 420 x 420 mm This Arburg Allrounder 420 S 800-350 was manufactured in 2003. A robust injection moulding machine featuring a closing force of 800 kN, opening travel max of 450 mm, and a distance between clamping plates of 750 mm. It has a clear column spacing of 420x420 mm and a net weight of 3800 kg. A great opportunity to buy this Arburg Allrounder 420 S 800-350 injection moulding machine. Contact us for further details. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm Iielhccqewp Ht Njljc ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1995, Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Injection pressure: 2120 bar Metering volume: 182 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Iielhowp Hnteccqlsc Control system: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core puller X 1 Dimensions: Weight: 3700 kg Length/width/height: 4.35x1.64x2.08m Drive: Pump/motor: 22 kW Heating output: 8.6 kW Total output: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Ielhswp E Iljccqljic Length/width/height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request