Horizon VAC 100 1 tower system 10 stations, with:
Horizon FC -20 Trimmer
Horizon SPF 20 Sticher-folder unit
Horizon PJ 77 Rutler.
All clean and well maintained, most recently the system has been serviced- production ready state.
We ship worldwide. more
Robo-FeederDer independent special investor of the robo-feeder is the perfect solution for the production of the brochure in digital printing: printer-independent, reliable and efficient. The stack of printed paper is inserted into the robo-feeder and then automatically sets separated.-easy merging of printed paper of in under different Grammaturen-short set-up times with varying Auflagen-high load capacity up to 1,300 sheets Separate suction and blowing air regulation guarantees ideal connectio... more
Horizon Stitchliner with the following units:
HORIZON STITCHLINER 5500 with 3x VAC 60 towers
Vac.60 Ha tower = number : 006018 built 2007.Jul.12
Vac-60 Hm tower = number : 008313, 008314 built: 2007.Jul.12
counter on towers read: 2.3 mio.
HTS-30 = 027005 2005.Jun.27
SPF-30 = 027006 2005.Jun.30
ACF-30 = 027006 2005.Jun.27
Counter on finishing reads: 13.8 mio.
In production and checked!
We ship worldwide!
used back press
The SP plus offline operates independently of the remaining processing as "stand alone" device.
Journal number of the brochure up to 30 sheets = 120 pages (80 g / m ²)
Production capacity (rate/hour) 1200 (single pass) / 1000 (double pass)
Brochure formats min. 105 x 105 mm
Brochure formats Max 350 x 250 mm
Still in production
Reference No .: 3199
Type: System 5000
Status: In production
2 x towers DC-10/60 with 10 stations each
Brochure postpress DBM 500 P
Hohner ring eyelet exchange insert 2 pieces for Universal 43/6 S.
for steel slide.
Blown air support for DBM series complete.
Transfer unit LUL-HM
Stapling and folding unit DBM-500
Front trim DBM-500T incl. 2nd knife (spare blade)
Collator bridge for system 4000/5000
LS-1 ... more
Duplo system 2000, good condition; serviced and checked by VCs; 2 x Tower 8/32 with 8 stations; Transfer module LUL; DBM 120 booklet folding unit with 2 stapling heads (counter 84000); DBM 120t trimmer for front crop (counter 51000). Stream delivery.
We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.
Tours and demonstrations are possible by appointment at our premises.
2 towers CP BOURG BST 10 N with suction air flow. Touch screen operation. Format up to 35 x 52 cm. minimum 11.5 x 20 cm min. full automatic booklet maker BDF with touch screen operation (PIN, folding and cutting) 2 stitching heads Hohner band delivery, joggers.
Model: Collators Horizon HAC 15a, 15m, SPF 11, FC 11
Age: 1993 / 2003
Size min.: 148 x 210 mm
Size max.: 318 x 470 mm
Bin pile height: 40 mm
Sheet weight range: 40-200 grm
Equipment: 2 x tower friction collator 30 stations, Folder – stitcher ( Hohner ) SPF 11 with hand feeder, Trimmer FC 11.
Semi-automatic spiral binding machine DWC-520
Machine brand new.
Year of manufacture 2017.
An efficient semi-automatic machine for producing calendars, notebooks and other products framed in metal spirals.
Support for machine settings through the intuitive touch-sensitive PLC control panel
Supports spiral diameters in the 1/4 „-3/4”
Working width up to 520 mm
The operator enters the following parameters into the computer: spiral diameter, pitch, required mesh length and spiral length.... more
Foldnak 40 Ernst Nagel in very good condition. The machine has a so-called online box, which ensures the perfect alignment of the arches by means of vertical vibrators. It's not delivery included.
Fm7kn2u3y10 Stations, hand feed station, stitching and folding unit with 2 narrow stitching heads; loop stitching heads
max. size: 350 x 500 mm
min. size: 65 x 100 mm
paper weight: 18 – 1000 g/m²
available immediately from stock more
Bhk8uf9qModel: booklet maker Horizon SPF 11 and FC 11
Size: max. 35 x 50 cm
Equipment: Folder – stitcher ( Hohner ) SPF 11 with hand feeder, Trimmer FC 11
Reference no: 3953
Manufacturer: HORIZON GmbH
Type: Horizon HAC-15a/m, SPF10II, FC10II
. No.: 66025
Construction year: CA: 1997
Shipping time: Immediately
HAC15 turn a no.: 66025
HAC 15 tower b number: 70216
SPF10II No.: 106010
FC 10II No.: 095022
HAC-15 as the brochure production plant
10II combined with the book fold unit SPF10II and the front cutter FC (optional) is an inline Broeschuerenfertigungsstrasse from a horizon Zusammentragen engine in the blink ... more
SDD 6300 Bookletmaker System
was installed with Océ VarioPrint 6160 Ultra
SDD BLT6389 Front Trimmer
SDD SFM6304 SquareFold Module
SDD BST6300 Belt Stacker (150 cm)
1st installed end 2011/beg. 2012
de-installed by Canon Germany
imm available ex works P2P ShowRoom Nuremberg more
-Robo feeder: paper weight 45-250 g / m²
Paper size min. 160 x 120 mm, max. 325 x 450 mm
Max leaf number per set: 35
-Foldnak 100: paper size max. 364 x 521 mm
min. 105 x 148, 5 mm
Brochure height of max. 2,5 mm
Height 3 mm corner stapling
-Trimmer 100: folded leaflet length
Max 260,5 mm, at least 74 mm
Cutting width standard 320 mm
Section thickness of max. 60 sheets of 80 g / m2
Fully automatic format adjustment
Offer consists of:
- Feeder Typ DSF-2000
- Bookletmaker Typ DBM 120 S/S
- Trimmer Typ DBM 120 T
Digital Feeder Typ DSF-2000
- vacuum feed
- up to 120 sheets/min
- capacity main-station 200 mm; cover-station 60 mm
- weight: 136kg
Bookletmaker Typ DBM 120 S/S
-Sheet by Sheet Bookletmaker with digital adjustment of size, stitching heads and folding unit
- 10 default templates and 3 programmable ones
- booklet lenght 200 ? 450 mm, width 200 ? 320 mm
- ... more
Nagel Foldnak 2
Format 325 x 450 mm
Klammerngroesse 26/6, 26/8S,Ri 26/6,
Format max.: 325 x 450 mm
Format min.: 140 x 210 mm
Paper thickness: ca. 30 Blatt
Length: 55 cm
Width: 42 cm
Hight: 55 cm
We offer a well maintained system 5000
with the following configuration to:
-2 x gathering Tower DC-10/60
-Delivery and dowry unit LUL-HM
-Stapling and folding unit DBM-500
-After pressing plant
-Front cutter DBM-500 T
-long display DBM-LS
Preset counter/kicker DBM-K
-Vibrating table with 90 degree offset
In addition to 2 Hohner ring eyelets stapling heads
Tower 1 = 313.000
Tower 2 = 812.000
Remaining machine = 517.000
Sale directly from printer to pick.
Brochure production system nail - Foldnak 100
Speed: 11000 sheets / hour
Paper weight: 45 gr/bis205gr / paper formats: Max 325mmx450mm
min. 160mmx120mm / power: 230V / 50 Hz or 115 volt / 60 Hz, 1000 watt - only 220,000 Brueschueren made - FK 100 nail DHK
Max paper size: 364 x 521 mm / min paper size: 105 x 148,5 mm
Electricity: 230V / 0.8 kW / or 115 V 60 Hz / 0,8 KW
Power 3000 per hour
-Staple types: wire - 100 trimmer
-Band table display... more
Model name: Stitchers for producing brochure
Type: iSaddle Duplo
Year of construction: 2012 / set up January 2013
open format max: 356 x 610 mm open format min: 120 x 210 mm
Facilities: 2 towers DSC 10/60i with Bridge (A4, across each drawer tray extension)
Transfer to the Groove, Groove engine (grooving single layers or entire sentences)
DBM-S folder, DBM-S Sankar 4 head version (comes with 2 new Hohner Heftkoepfe standard)
DBM-S trimmer, DKT-200 head and foot trimming includ... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.