Used Document Finisher for sale (9,845)

Condition: ready for operation (used), Nagel Foldnak 8 with 2 stitching heads Nagel SP Plus Square Press Nagel Trimmer with belt delivery Hnelsy Rr Eashccqtsl

Condition: ready for operation (used), For sale: Duplo DSF-2000 in good, fully functional condition as shown in the photos. Tested and fully operational, in very good condition. Packed on 3 pallets. Inspection welcome near Flensburg – flight to Hamburg plus approx. 90 minutes by car. Price is fixed and net plus VAT or for export. B2B sale only. Helhccqoyitvcjtonl

Condition: good (used), Duplo DC-645 cutter slitter creaser + DC-F1 folder unit Detailed information / specifications in the attached brochures Hnjlhsy Rkugjccqtol

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-671-2399 Horizon VAC 100A + SPF200 + FCA 200a, Year: 2012 total counter: 11 mio. equipped with: - 1 stations type VAC 100 a - short belt delivery - Trimmer FC-200 A - Stitching and folding unit SPF 200 A - 1 collating tower VAC 100 a - 2 stitching heads Hohner - monitor Hjlhccsywhczeqtenl --> available: 04/2026

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, Horizon SPF-200L+FC-200L+LC-200 stiching machine. (not including collator). The machine is in original packaging (brand new, it was never used). Hslhey R Ayhsccqtsnl As official deler we can do installation and training.

Condition: good (used), overall weight: 160 kg, The BookMaster brochure machine and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate, low-maintenance, and therefore by far the most advanced, user-friendly, and reliable saddle stitch booklet makers on the market. The BookMaster features a unique stapling mechanism that ensures virtually maintenance-free operation. The main wear parts are integrated into the staple cartridge and are replaced every 5,000 cycles during cartridge change. This enables over one million cycles before any stapler head service is required. The BookMaster is equipped with manual adjustments for page margins, end alignment, and staple/fold positioning. The TrimMaster trimming unit is fitted with a single, self-sharpening blade made of hardened steel for clean trimming of the book fore-edge. All trimming waste is conveyed outside the machine to an external waste container, allowing for continuous operation. Helhjy Idr Hoccqtonl Finished brochures are transferred onto a high-performance delivery conveyor. Additional information: - Max sheet size: 482 x 320 mm - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trimming length: 25 mm - 230 volts Shipping available, collection possible, trial run available. Operating manual included.

Condition: used, Year of construction: 2010, HORIZON VAC-100a + 4x VAC-100m + ST-40 (2010, Used) 1. Configuration VAC-100a Air Suction Collator Tower × 1 VAC-100m Air Suction Collator Tower × 4 ST-40 Stacker × 1 Language: English Interface Total Stations: 50 Bins 2. Specifications VAC-100 Series Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 120 × 148 mm Paper Weight Range: 40 ~ 250 gsm Hjlhccqey Rixqetjnl Bin Capacity: 55 mm per station Power Requirement: 230V / 60Hz Feeding System: Air Suction System ST-40 Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 182 × 128 mm Stacking Capacity: Approx. 360 mm

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Heleyuubdehccqtjnl Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, STC-Ref: G-981-0027 Xerox Plockmatic Pro 30 ,Year: 2016 format: 330 x 457 mm equipped: - brochure finisher - paper size min. 206 x 275 mm - 2 stitching heads - hand feeding station - also as "stand alone" machine usable - stapling capacity 30 sheets - folding capacity 1 to 30 sheets of 80 gsm - support for Xerox copiers Color 800/1000 Press - support for Xerox copiers D110/D125 Copier/Printer - support for Xerox copiers D110/D125 Printer Hnjlhcoyyxz Hecqtol - Paper weights: 300 g/m² - paper size max. 330 x 457 mm --> available: immediately

Condition: excellent (used), Year of construction: 2009, Horizon Brochure Production Line Collating Machines Horizon VAC 100a, VAC 100m Number of Stations: 2x10 Max. Format: 500 x 350 mm Min. Format: 148 x 120 mm Loading Capacity: 55 mm per station Speed: up to 9,500 cycles/h Weight: 320 kg per tower Machine Dimensions: 810 x 652 x 1,961 mm Power Supply: 230 V, 10.6 A, 2.3 kW HORIZON ST-40 Stacking Table Specifications Max. Format: 350 x 500 mm Min. Format: 182 x 128 mm Paper Thickness: 52 – 208 g/m² Speed: up to 8,000 sets/h Stack Height: 360 mm Machine Dimensions: 1,353 x 652 x 1,027 mm (L x W x H) SPF 200A Stitch-Fold Station Infeed Format (4-page sheet): min. 180 x 105 mm, max. 508 x 356 mm Brochure Final Size: min. 85 x 105 mm, max. 250 x 356 mm Brochure Thickness: up to 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with FC-200A front trimmer) Machine Dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power Supply: 230 V, 5.3 A; 1.0 kW Trimmer: FC 200A Holhccqsyhzubjtonl Available from 05/2026.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Plockmatic PBM350 brochure production system. Holhccqeym Nnvetenl Item for sale: 1 x Plockmatic PBM350 with the following equipment: Includes trimmer Includes book fold Meter readings: Total: approx. 780,616 brochures Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Watkiss Auto SpineMaster’ book spine press. Item for sale: 1 x Watkiss Auto SpineMaster Hslhccqoym Nlnjtjnl Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, Plockmatic PBM 500 including BookFold Module and Trimmer Module. This booklet maker is in very good, lightly used condition! Counter readings: PBM 500: 86,305 BookFold Module: 173,595 Trimmer Module: 204,306 - Produces professional booklets inline or offline with stapling and folding. - Capacity: up to 50 sheets of paper (80 gsm) for folded booklets of approx. 200 pages - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm - Compatible with A and B formats as well as many custom sizes. Looking for other configurations on the machine? We are flexible and can tailor the machine to your requirements! Hnslhccqsyi Ta Uotel This machine has been inspected and thoroughly tested by our own specialized technical team. If you would like further information, please feel free to contact us. Worldwide shipping available.

Condition: excellent (used), Year of construction: 2006, Booklet production: Horizon VAC 100A, SPF 20A, FC20A, LC 200, PJ 77 Counter reading on the VAC 100A tower: 1.88 million Hnjlhccjrt T Ahoqtol The machine is in perfect working order and is in very good condition. Infeed formats: Max. 500 mm x 350 mm, Min. 180 mm x 120 mm Finished formats: Max. 250 mm x 350 mm, Min. 85 mm x 120 mm (cut) Type thickness: Max. 4 mm Staple spacing: 73 mm - 160 mm 2 Hohner 48/5 stitching heads Wire gauge: 24 - 28 Machine dimensions: Length 470 cm x Width 110 cm x Height 196 cm (without PJ 77) Weight: 990 kg Power supply: 2 x 230 V with Schuko plug

Condition: ready for operation (used), functionality: fully functional, Very nice booklet maker for sale. Folding, stitching, and trimming. Brand: Horizon, model SPF-10-II with FC-11 trimmer. Fitted with Hohner stitching heads. 2,800 books per hour, 220 volts. Of course, you are welcome to test this machine at our facility. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Regards, Henk Hoos. Hslheyb Ahxjccqtjnl

Condition: excellent (used), MKW Collating Machine Spare Parts: 2 Knives, Suction Device, Frequency Converter, Drive Belt • For sale: 2 knives for an MKW Rapid UT equipped with SFT 350 front trimmer. • Suitable for MKW Rapid UT saddle stitchers • Unit: SFT 350 front trimmer • Condition: used / re-sharpened / ready for use • Quantity: 2 pieces (upper knife + lower knife) Holhccoyuxqpsqtonl • Ideal as spare parts or reserve for bookbinding / booklet production. • 1 x 7 cm and 1 x 7.5 cm knife length • MKW Rapid UT • SFT 350 • SFT350 knife • Front trim knife • Fronttrimmer knife • Stitching line knife • Saddle stitcher knife • Booklet maker knife • Collating machine spare parts • MKW spare parts MKW Frequency Converter I/O Module Standard (Part no. 410629) Spare part for MKW drive electronics • Designation: E82ZAFSC001 • Type: I/O Module Standard • Suitable for Lenze frequency inverter series 8200 • Ideal as a spare part for industrial automation, printing presses, conveying technology, or machinery controls. 10 machines available – bulk purchase negotiable for a very attractive total price. Quick transaction preferred!

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Plockmatic PBM350e brochure production system. Item for sale: 1 x Plockmatic PBM350e with the following equipment: Includes PBM BF Book Fold Includes PBM TR Trimmer Meter readings: Total: Approx. 667,286 brochures Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Hnslhcsx S D A Tecqtsl A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: like new (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic PBM 350 including BookFold Module and Trimmer Module. This booklet maker is in very good, lightly used condition! Meter readings: PBM 350: 173,934 BookFold Module: 83,464 Trimmer Module: 164,081 - Produces professional booklets inline or offline, with stapling and folding. - Capacity: up to 35 sheets of paper (80 gsm) for folded booklets, approximately 140 pages - Supported paper sizes: width from approx. 206 mm up to 320 mm, length up to approx. 457 mm - Compatible with A and B sizes as well as many custom formats. Looking for different options on the machine? We are flexible and can configure the machine to your requirements! This machine has been inspected and extensively tested by our own specialized technical service team. If you require further information, please do not hesitate to contact us. Worldwide shipping available Hnolhex Hi I Rjccqtsl

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, stack height: 60 mm, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², production capacity: 5,000 unit/h, Duplo Bookletmaking System 5000 This offer includes: 2x Collating Tower DC-10/60 Transfer Unit LUL-HM Stitching and Folding Unit DBM-500 Front Trimmer DBM-500T Batch Counter DBM-K Long Delivery Stacker DBM-400LS 2x DC-10/60 (20 stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height per station: 60 mm Feeders: Suction/Blow air Controls: Double sheet, misfeed, paper jam, and empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stitching Unit DBM-500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Production speed: 5,000 cycles/hr (A5) 4,600 cycles/hr (A4) 4,000 cycles/hr (A3) Stapling capacity: 5 mm (approx. 50 sheets, 80 gsm) Hslhccjx Niupsqtonl Folding capacity: 25 sheets Number of stitch heads: 2 Controls: Paper jam detection, sheet position indicator, wire end sensor Memory capacity: 12 jobs Folding and stitching modes: folding only; saddle stitching/folding; corner stitching/folding; corner stitching; side stitching/block stitching Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Stitcher unit counter readings (see photos): Left counter: 1,392,871 Right counter: 5,218,991 Front Trimmer DBM-500T Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Production speed: >5,000 cycles/hr Processing thickness: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, stack height: 60 mm, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², production capacity: 5,000 unit/h, Duplo Booklet Production System 5000 The offer includes: 1x Collating Tower DC-10/60 Transfer Unit LUL-HM Staple and Folding Unit DBM-500 Front Trimmer DBM-500T Preset Counter DBM-K Long Delivery Stacker DBM-400LS DC-10/60 (10 Stations) Paper size: min. 120 x 148 mm; max. 350 x 500 mm Paper weight: 40–300 gsm Stack height: 60 mm per station Feeders: Suction/blast air Controls: Double sheet, misfeed, paper jam, empty station detection Power supply: 230 V, 50 Hz, 4.5 A, 1,035 W Dimensions: 630 mm x 750 mm x 1,972 mm Weight: 290 kg Folding and Stitching Unit DBM 500 Paper size: min. 120 x 170 mm; max. 350 x 500 mm Speed: 5,000 cycles/h (A5) 4,600 cycles/h (A4) 4,000 cycles/h (A3) Stapling capacity: 5 mm (50 sheets, 80 gsm) Folding capacity: 25 sheets Number of stitch heads: 2 Controls: Paper jam, paper position indicator, wire end Memory: 12 jobs Folding and stapling styles: folding without stapling; saddle stitching with folding; corner stapling with folding; corner stapling; block/side stapling Power supply: 230 V, 50 Hz, 5 A, 1,150 W Dimensions: 1,610 mm x 770 mm x 1,020 mm Weight: 412 kg Front Trimmer DBM 500T Booklet size: min. 85 x 120 mm; max. 250 x 356 mm Trimmed final size: min. 75 x 120 mm Speed: >5,000 cycles/h Processing capacity: 50 sheets (80 gsm) Power supply: 230 V, 50 Hz, 3.3 A, 759 W Hslhccsx Nimrjqtjnl Dimensions: 700 mm x 635 mm x 1,094 mm Weight: 241 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Automatic binding, stitching, and cutting machine (VSHRA), designed for serial production of brochures bound with wire staples. Working condition 4 automatic feeding stations for signature insertion. Maximum trimmed format: 30.5 x 34.9 cm. Minimum trimmed format: 8.9 x 12.0 cm. No documentation available. Hnjlhccqeyb Tcaotol

Condition: excellent (used), Duplo iSaddle Digital bookletmaker DSF-2200 Sheet Feeder DBMS-F2 DBMS-S DBMS-T DKT-200 DKT-LS Spinemaster Hnslhcjx U Tkrocqtjl

Condition: excellent (used), Technical data: Automatic line for collecting, stitching, and folding brochures 6 feeding stations + 1 cover station Hnslsxtw Ehehccqtjl Hohner stitchers (2 heads, expandable) Automatic trimmer Electronic control with monitor High performance and precision

Condition: excellent (used), Functions: creasing and folding in a single pass Automatic sheet feeding Precise adjustment of crease positions Easy operation and high efficiency Ideal for producing covers, invitations, brochures, etc. Hjlhccsxtxdxeqtsnl

Condition: excellent (used), Computer control capability Hnolhccqoxtxgyjtel 2xDSC - 10/60i DBMi Saddle System Automatic collection, stitching, and folding of brochures iSaddle System – precise spine-line stitching Compatible with various types of feeders (Duplo DSC, DBM, etc.) High accuracy and finishing quality Quick format changeover Ideal for the production of brochures, catalogues, and magazines in digital or offset printing