Used wide belt sanders 1300-1499mm working width for sale (122)

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Iajdpsx A E Szofx Ad Ret Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Iodpfx Ajx A Tfisd Roat Min. machining thickness: 100 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm Iodpfx Adjypware Rjat engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: used, Working width 1.350 mm Number of sanding units 2 st. Workpiece thickness max. 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Iedpfx Aeyyc Drjd Rjat Available from week 33/2026

Condition: used, Year of construction: 1996, operating hours: 12,171 h, Colour: Grey BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: No - Bottom sander: - CE certificate present: No - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Sanding pad present: No - Top sander: - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Structuring brush present: No Isdpfswnh Eqox Ad Reat - Sanding pad present: No - Voltage [V]: 380 - Current consumption [A]: 172 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Iasdpfx Ajwpm I Tsd Rst Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. UK Price £9,000 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Connected to services and available for any demonstration. Excellent Condition. Iajdpfx Ajyuy R Dsd Rot Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: new, Technical data: Iodpfx Adehtuvro Rjat Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 Iasdsd E Ixzspfx Ad Rst working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. Iedeutdrhepfx Ad Reat * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min suction unit.

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Iaedjw R Hh Uopfx Ad Ret Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads Iasdpfx Adjwka T Se Rjt - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Ijdpfsy Nktmex Ad Roat Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Iodpfx Adjx A Tage Rjat Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008201, Max. machining width: 1300 mm Ijdsxmgyhspfx Ad Reat Min. machining thickness: 200 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008399, Max. machining width: 1350 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Iodsy I Tm Hspfx Ad Reat

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Iedpfxjy Edqws Ad Rsat Working Table: Fixed pass height No. Operating units: 4 Nr

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Iedpey Ehiwjfx Ad Roat Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2006, Description of the product Brand: Costa Model: TRITT1350 Serial no: A60314LL1 Year of manufacture: 2006 Stock number: 2002440BXA Technical data Working width: 1350 mm Sanding belt size:1380x2620mm Power:400volt, 50 Hz, 3 phase, 51kw, 101AMP 1. sanding unit 1 sanding belt sectioned 2. Sanding unit 2 sectioned sanding shoe 3. sanding unit 3 sectioned sanding shoe 4. cleaning brush Ijdpfxsv Hfdvj Ad Reat 5. blast cleaning 6. Vacuum Motor: 51 kW Size for transport: 320x240x265 cm (lxwxh)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Iaodeya I Iuspfx Ad Rot Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: good (used), Working width: 960 mm 1 combined unit Shaft diameter: 160 mm Processed material height: 160 mm Iasdjy Izlqspfx Ad Rst Abrasive belt dimensions: 990x1800 mm Extraction port diameter: 140 mm Electric lift Digital display Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm Iodpfeyh Hwusx Ad Reat - Location: not in stock - Available from April 2026

Condition: new, Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-200 mm Feeding speed 0-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Dust cleaning brush 0,37 kW Feeding motor 4 kW Iasdpfx Aodflqaod Rot Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2400mm Weight 3300kg

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Iajdpfx Ajd H Sc Esd Rjt Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Iaodpfxoynk Dnj Ad Rjt Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500