Used Heesemann for sale (38)

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Nsdpsx A E Szefx Airewh Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Nedpfsyulfmox Airswh Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Nwjdpfx Aijx Rpghereh Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable Nedpfxox N A Aao Airewh – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: used, Year of construction: 2016, functionality: fully functional, feed length X-axis: 1,350 mm, total width: 2,260 mm, total height: 2,350 mm, total length: 4,195 mm, working width: 1,350 mm, workpiece weight (max.): 150 kg, overall weight: 10,000 kg, working height: 880 mm, power: 86 kW (116.93 HP), compressed air connection: 7 bar, air demand: 186 m³/h, Machine is working. Planned dismantling DEC-2026 Nedpfszgaa Ujx Airewh

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 128 9 7000 3043, feed length X-axis: 1,350 mm, total width: 1,975 mm, total height: 2,350 mm, total length: 2,260 mm, overall weight: 4,500 kg, working height: 880 mm, power: 93 kW (126.44 HP), workpiece height (max.): 150 mm, air demand: 151 m³/h, Good condition. Nwsdpfx Ajzf U T Hsirjh Planned dismantle DEC-2026

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Nwsdpfxex Rdn Tj Airjh Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: ready for operation (used), Year of construction: 2017, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) Nwsdpfjy Twhxex Aireh • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: used, Working width 1.350 mm Nwjdpfxeyyc Drs Airjh Number of sanding units 2 st. Workpiece thickness max. 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Available from week 33/2026

Condition: used, Number of sanding units 4 st. Nsdpoxr N I Eefx Airswh sanding width 1.300 mm Sanding height max. ca. 140 mm

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Nwsdoxcg Scspfx Aireh

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization Nwodey A D Ecepfx Airsh 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Nwjdpfxjvxryne Airjh Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Nwsdpjya I Iuefx Airjh Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) Nedpfewcqr Aex Airswh The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Nwsdexivbmjpfx Aireh

Year of construction: 2002, condition: used, machine/vehicle number: 200212102, Technical data: - Manufacturer: Heesemann - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) Nwsdsyffrnopfx Airsh 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized -Without own control (A new control can be offered as an option) - Location: Blomberg camp

Condition: good (used), Year of construction: 1995, Multi-purpose surface sander, paint sander, modular unit, finishing unit, sanding unit, sanding station, belt sander -Max. sanding belt width: 1350 mm -Abrasive belt: oscillating Nwsdpfxegnnbve Airsh -Drive: 11 kW -Speed: Frequency controlled -Sanding belt dimensions: 2620 x 1350 mm -Max. workpiece clearance height: 140 mm -Sanding belt unit: height-adjustable (conveyor belt fixed height) -Machine dimensions: 2210/2320/H2310 mm -Machine weight: 4500 kg

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Nodpfeya I Rijx Airjwh Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Nwodjyvvr Uspfx Aireh Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Nwodpfxjywuqrs Airjh Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm Nwodpfow H Sk Tox Airjh - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Nwjdsxiy Htjpfx Airjh Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, working width: 2,000 mm, overall weight: 14,000 kg, table height: 900 mm, Equipment: 1 working unit with calibration roller Nsdpfx Aowy Nxveirjwh 1 working unit with segmented magnetic CSD pad controlled by CNC 1 working unit with segmented magnetic CSD pad controlled by CNC

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Nodpowy Nndjfx Airjwh