Used complete painting plants for sale (51)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: Bodpfx Ame Adrrzjgelp - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Bedpfx Ame Aa Ad Tjgelp Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, Year of construction: 1997, functionality: fully functional, working width: 200 mm, working height: 100 mm, The device is designed for coating all types of profiles (e.g., baseboards, furniture trims, balustrade elements, etc.) in a continuous process. Its high operating speed will help optimize production processes. Important information: Year of manufacture: 1997 Without painting accessories Operating speed: up to 56.4 m/min ATEX extraction fan Max. element height: ~100 mm Max. element width: 200 mm Min. element length: ~850 mm Paint overflow collection tray in the form of a drawer Bedpfx Amo Afk I Degolp Option to purchase used hydrodynamic painting accessories (in very good condition) from DURR – 4 Airmix guns + pump.

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately. Bjdpsywaqqefx Amgelp

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height) Bodpev T Ttxefx Amgelp

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! Bledpszg Epusfx Amgep For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: good (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 504404C, feed length X-axis: 20 mm, working width: 1,300 mm, working height: 940 mm, Machine for smoothing lacquer using a silicone belt with UV curing Bedpfx Ajy Effcemgslp

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Bsdpez Hbm Tofx Amgolp Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Bodpfxezpydre Amgslp Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm Blodpsx Ah A Asfx Amgsp - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Blsdpfxjzuzg Es Amgop Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2016, I sell the 2-head roller coating machine for surface finishing at parquet production Cefla Sorbini Smart Parquett MRF/300. Year 2016. Configuration: Blodozn Axcopfx Amgjp 2-head roller coater Oil type: Oxidativ, UV, Let Oil load : 4 – 30 gr/m2 + brand new unused vacuum pump +2 pcs. new rubber cylinder +1 pc. new feeding band Working width: 300mm Total length: 2,30m Total width: 1,30m Weight: 960kg Available immediately. Fully working. Still in production. Possible to run and test. Documentation and CE included.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts Bodpfszuzt Esx Amgelp - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Four-sided impregnation machine + drying tunnel Number of top brushes: 4 Number of side brushes: 2 Number of bottom brushes: 2 Brush speed adjustable via a frequency inverter Feed rate adjustable via a frequency inverter Impregnation fluid recovery system for the tank Blode Adznlspfx Amgsp

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding. Blsdpfx Amezuztxsgep

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm Bjdpfxozuzfzj Amgslp - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin Bjdpfx Amszuzg Sogjlp The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: excellent (used), DIGITAL PRINTING LINE. Consisting of: Blsdezxpdgjpfx Amgsp a) ‘DOUCET’ Mod. CR-1.9-30.60 motorised roller feed b) “UNIVERSAL ROBOT” loading robot, Mod. UR 10 c) “WANDRES” cleaning machine, Mod. X 121/600/1200 d) “GIARDINA” rollers coating machine, Mod. G02/05 e) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus f) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 g) “CARMICHAL” pressurised chamber h) “ATLAS COPCO” screw compressor, Mod. G4 FF h) “PROJECTA” digital printing machine, Mod. Evo 8 (max. 8 printheads) i) “GIARDINA” motorised roller conveyor, Mod. BRI/5300 l) “GIARDINA” rollers coating machine, Mod. G02/05 m) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus n) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 o) “WEBER” labelling machine, Mod. 4300 R.H. (pro Apply) p) “FANUC” unloading-stacking robot, Mod. M-20iD/25 with "DOUCET" motorised roller conveyor

Condition: refurbished (used), Year of construction: 1997, 1997 CMA Roby 5 EX Anthropomorphic painting robot (self-learning) complete with electrostatic gun and generator. Blsdpfx Asxwctfjmgsp Sames generator and gun.

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min Bsdpfx Aszv Tdfjmgelp - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Blsdpozhblnefx Amgep Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2026, functionality: fully functional, The DMS 600/4S is an automatic painting machine manufactured by our company, designed for painting or staining furniture components, stairs, moldings, and panels with a maximum height of 80 mm. Easy and straightforward operation, combined with the latest technology, guarantee the highest quality of painting. The compact dimensions of the machine allow it to be used in smaller spaces. The machine is controlled via a 19" touchscreen based on intuitively designed software. The machine is designed so that all maintenance operations, such as filter replacement, cleaning, and changing paints or stains, can be performed in an optimal manner. The DMS 600/4S is manufactured according to well-known and proven principles: the system is designed as an enclosed booth with the option of connecting an air extraction system and a particulate filter. The machine is equipped with a conveyor belt, which, depending on the model, can be protected with foil/paper or equipped with a scraping and cleaning system for the main belt. Both systems are designed for paint recovery. The painting zone includes a movable arm that can accommodate up to 4 spray guns. The spray guns are mounted on adjustable brackets (the spray guns are suspended so that the height can be adjusted by +/- 100 mm). At the inlet, the machine is equipped with an EX sensor bar for detecting objects. The object detection scanner works by transmitting the outline of the object to the controller, which then appropriately controls the operation of the spray guns, applying paint only to the object's surface. The machine is prepared for the installation of low- or high-pressure painting equipment. Blodpfx Ame Aa Iwrjgop Key information: - Working width 600 mm, - Movable carriage with spray guns - Paint recovery system for reuse - Belt cleaning system - Small machine adapted to customer needs

Condition: used, Drying tunnel for Impregnirka with CM Macchine RMS 40x800 discharge system. Bsdez Aiv Ropfx Amgelp Tunnel length: 7800 mm Width: 310 mm Side material discharge.

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide Bedpjxlb E Ajfx Amgelp - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: Bledszk Epcopfx Amgjp – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h