Used Electronic Painting for sale (11,206)

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Lsdpfx Aszq Ax Uskqehn Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lhjdpjz Adnuofx Akqen

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. Lhedpfx Ajyv H T Aekqon 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Lhsdpfx Aowu Aa Nokqen Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Lhedpfx Aoydqk Hokqon Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, For sale is a professional, industrial-grade painting station built with components from the renowned brand GRACO. The core of the system features two Endura-Flo™ 4D350 high-pressure pneumatic diaphragm pumps. These pumps are characterised by a best-in-class pressure ratio and exceptionally low fluid pulsation. Additionally, the station is equipped with two advanced Graco DataTrak™ control and monitoring panels, which control pump operation in real time, count cycles, and protect the system from running dry. The entire assembly is mounted on a heavy-duty, factory steel frame (stand). Technical Specifications: • Manufacturer: GRACO (USA) • Pump Model: Endura-Flo 4D350 • Quantity: 2 pumps included in the set • Pressure Ratio: 4:1 • Displacement Per Cycle: 350 cc (350 cm³) • Monitoring System: 2x Graco DataTrak (electronic control and runaway protection) • Compatible Fluids: Solvent-borne and waterborne paints, varnishes, lacquers, catalysts Lsdsz Hw Aqjpfx Akqehn • Overall Dimensions of the Station: 152 x 237 x h=132 cm

Condition: used, F&P Electronic Temp-star TS.Mulit 5 A hot runner controller, used in plastic injection molding for the precise temperature control of hot runners/channels within molds. Overview of your module: Manufacturer: F&P Electronic GmbH (Waldkirch, Germany) Series: Temp-Star (abbreviated as TS.MULTI 5) Ljdpfj Abx Hgox Akqshn Function: Multi-channel temperature control (typically 5 zones/channels, as indicated by the designation "MULTI 5") for injection molds.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Ljdpfszcxbwjx Akqehn Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 06-04-04, For sale: Göpel Electronic PXI-LIN V1.1 LIN Controller Module (PXI 3071), in fully functional condition. Manufacturer: Göpel Electronic Model: PXI-LIN V1.1 (PXI 3071) Serial Number: SN: 06-04-04 Year of Manufacture: 2006 Condition: Used – Tested and Functional Interface: PXI Lodezn Htwepfx Akqshn Application: LIN bus controller for automotive test systems Connector: 25-pin D-Sub Fully tested and operational. Ideal for automotive LIN bus testing, restbus simulation, and ECU testing. Compatible with Göpel automotive testing software. Removed from a working industrial environment; no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM Ljdpfx Akoz Nxwcsqehn The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. Ljdpfx Akjz Nxk Njqjhn The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Lsdpfj Aazwxex Akqehn Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. Lodpsywaqqofx Akqjhn The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately.

Condition: used, Year of construction: 1970, functionality: fully functional, centre height 120 mm spindle bore 20 mm Lodpfxjzndt Ie Akqehn copying device ja kW weight of the machine ca. 3 t

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Lhjdpjzduplsfx Akqon 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Lhjdpfx Asyg H Erjkqjn 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2020 Empty weight: 7.000 kg Dimensions (LxBxH): 300 x 235 x 315 cm Serial number: 8099 Hours on display: 7998 Number of filling heads: 33 Min. unit capacity: 75 units/min Max. Unit capacity: 270 units/min Nozzle diameter: 15 Control system: Siemens Weight: 7000 kg Dimensions (LxWxH): 3000x2350x3150 mm The machine/line has produced 750 and 500 ml glass bottles. Equipped with Weight electronic system, Lina Pack LCF 400/2500/450 cap feeder/elevator Online auction of high quality food industry processing equipment (e.g. STEPHAN mixing, HEMA, BOSCH piston filling, HEUFT x-ray inspection, NETZSCH pumps, PRASMATIC, PAGO packaging and labelling etc.), various mustard mills, rotary sieves and further universal processing equipment due to the plant closure of the renowned tube, glass and bottled mustard and mayonnaise manufacturer at Neuss near Dusseldorf in Germany. The online auction opens Friday 16 October and closes Tuesday 3 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 29 October Lhedpfxsz Tf Ebj Akqen Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Lhjdpfez D Evyox Akqjn Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), NEDERLANDS Gebruikte SCHIELE Trockenkabine 80mm MW – Doorloopdroogcabine met elektrische uitrusting en schakelkast Wij bieden deze gebruikte SCHIELE-doorloopdroogcabine aan, inclusief elektrische uitrusting en schakelkast. Fabrikant: SCHIELE Model: Trockenkabine 80mm MW Bouwjaar: 2012 Ordernummer: 21204763 Beschrijving - 2 identieke compartimenten - Afmetingen per compartiment: 8 m breed × 16 m lang - Elk compartiment beschikt over een eigen verwarmingssysteem, circulatieventilatoren en gasbrander. Technische specificaties per compartiment Verwarming - Verwarmingsmedium: aardgas H - Verwarmingsvermogen: 120 kW - Maximale droogtemperatuur: 58 °C - Maximale temperatuur verwarmingsoppervlakken: 58 °C Luchtstromen - Circulatielucht: 2 × 22.500 m³/h (totaal 45.000 m³/h) - Regelbare toevoer verse lucht: 900–3.600 m³/h - Minimale afvoerluchtstroom bij 20 °C: 900 m³/h Ventilatoren en motoren - Circulatieventilatoren: 2 × 7,5 kW (totaal 15 kW) - Toerental: 1.450 rpm - Afvoerventilator: 1,5 kW - Toerental: 1.450 rpm Maximale oplosmiddeldoorvoer - 7.600 g/h (7,6 kg/h) Gasbranders – Weishaupt WG10N/1-D ZM-LN Elk compartiment heeft één gasbrander. De eerste foto toont het typeplaatje. - Vermogen: 25–110 kW - Regeling: modulerend / tweetraps - Brandstof: aardgas; LPG-geschiktheid afhankelijk van de configuratie - NOx-klasse: klasse 3 - Voeding: 230 V, 50 Hz - Gewicht: ca. 14 kg per brander Voor meer informatie kunt u ons een bericht sturen of telefonisch contact opnemen. ENGLISH Used SCHIELE Trockenkabine 80mm MW – Continuous-flow drying unit with electrical equipment and control cabinet Lhedpfxo Aax Ibs Akqon We offer this used SCHIELE continuous-flow drying unit, complete with electrical equipment and control cabinet. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of construction: 2012 Order number: 21204763 Description - 2 identical chambers - Dimensions per chamber: 8 m wide x 16 m long - Each chamber has its own heating system, circulation fans, and gas burner. Technical specifications per chamber Heating - Heating medium: H-grade natural gas - Heating capacity: 120 kW - Maximum drying temperature: 58 °C - Maximum temperature of heating surfaces: 58 °C Airflows - Circulation air: 2 x 22,500 m³/h (total 45,000 m³/h) - Adjustable fresh air supply: 900–3,600 m³/h - Minimum exhaust airflow at 20 °C: 900 m³/h Fans and motors - Circulation fans: 2 x 7.5 kW (total 15 kW) - Speed: 1,450 rpm - Exhaust fan: 1.5 kW - Speed: 1,450 rpm Maximum solvent flow rate - 7,600 g/h (7.6 kg/h) Gas burners – Weishaupt WG10N/1-D ZM-LN Each chamber has one gas burner. The first photo shows the burner's nameplate. - Capacity: 25–110 kW - Control: Modulating / two-stage - Fuel: Natural gas; LPG compatibility depends on the configuration - NOx class: Class 3 - Power supply: 230 V, 50 Hz - Weight: Approx. 14 kg per burner For more information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters Lhsdpfx Aks Adr Hxjqsn - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Ledpfeyg H Dhox Akqshn Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet Ljdpfx Asz Ix Azjkqshn - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Lhsdpszmm Ixefx Akqsn Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system and its installation situation before dismantling and to document it for a later reinstallation. Technical data and equipment: • Large-area filtered supply air ceiling approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping Lhjdjz Ikyrjpfx Akqjn • Electrical system control / control cabinet • Cabin lighting • Sale includes the system as it currently exists on-site Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Its previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are to be carried out entirely by the buyer at his own cost and responsibility. The buyer must organize the necessary skilled personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on the available documentation, nameplates, and the current condition of the system. Information provided without guarantee. The condition and scope determined during inspection shall be decisive. Selling price: 25,000.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 2000, condition: used, functionality: fully functional, We offer these used USF sandblasting and painting booths, model 2 sandblasting booths and 1 painting booth, manufactured in the year 2000. Manufacturer: USF Model: 2 sandblasting booths and 1 painting booth, 12 meters x 5 meters x 5 meters Year of manufacture: 2000 Condition: Used Category ID: 227 Type: 2 sandblasting booths and 1 painting booth, with dimensions of 12 meters long, 5 meters wide, and 5 meters high. The entire unit is in working order and comes with operating accessories. It is available for dismantling on-site (in the Var department, 83) from mid-December. Dismantling and removal are the responsibility of the buyer. If you have any questions or need more information, please feel free to send us a message or call us. Lsdpfxoz I T Nvo Akqehn