Used Spray Paint Automat for sale (26,055)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. Fodpfefy T Arsx Ahnsph The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: used, Year of construction: 2008, Max. weight per suspension point 44 kg Fpodpfszbvlwox Ahneh Conveying Technology (Frequency-Controlled) 0,6 - 2,0 m/min Total chain length ca. 40.500 mm indexing 270 mm In our assessment, the paint line is in good used condition. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, Rehnen sprtiz table Lacky Fpodpfjlrrrmjx Ahnsh The advantages: Thanks to its 360° rotatable arms, it always allows the best grip and a good support for all workpieces Easily adjustable in height and 360° rotatable for fast, efficient work Thanks to its covers, even after intensive use, it is still possible to move the arms. Height in mm: 950-1250 Width in mm: 600-1120 Length in mm: 700-1260 Diagonal in mm: 900-1680 Load capacity in kg: 100 Location: ex stock - immediately available -

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Fpsdpfxoy A Tpqe Ahnsh Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories -High flexibility Fpjdpfx Ahebpg E Esnjh -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Filter surface: 2 m² ( 2 x 1 mtr.) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical fields of application: - Furniture and wood industry - Aerospace - Off-road - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Fpodpfjy A Ni Tjx Ahnjh Suitable for the following materials: - Wood stains, paints and glazes - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: used, 450218 Pneumatic Piston Pump, Fsdpfolf H S Uox Ahnjph - No. 1: K. Schmidt Type DC 30.20/4, - No. 2: BEDE AIRLESS, max. approx. 36 l/min.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,000 mm, Spraying machine Manufacturer: Leif Lorentz Model: B3 Suitable for water-based paints and products Working width: 1000 mm Pass-through height: approx. 110 mm Equipped with: 1x Dete MX 32 high-pressure piston pump Max. air inlet pressure: 0.8 MPa (8 bar) Pressure ratio: 32:1 Max. operating pressure: 25.6 MPa (256 bar) Max. delivery rate (free flow): 11 l/min 5x automatic airless spray guns Feed rate adjustable, workpiece transport via conveyor belt (belts replaced!) With integrated paint recovery: paint, stain or oil is collected and can be reused Integrated filtration system The machine is currently being cleaned and technically inspected. Sale will be in fully operational condition. Fpjdpfoxmrdxox Ahnjh Delivery time: approx. 3 weeks

Condition: good (used), Year of construction: 2015, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Fedpfxevmtw Re Ahnjph Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm length:850mm height:1150mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, lighting, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 1600(w)x1900(h) Overall dimension(mm): 1700(w)x2350(h)x1910(d) Technical data: - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Lighting: 1pc 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Fpsdpfx Aheia Taisneh Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us. Fjdoia Taqspfx Ahnsph

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Fsdpfx Asia Ta Rohneph Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan Fodpfx Aoia Taujhnoph - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Fpsdpfxjia Ta Hj Ahnoh Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Depth: 2550 mm Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW Fedew Tt Tvopfx Ahnjph

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: Fjdpfjia Ta Ajx Ahnjph - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm Fodpfehby Riex Ahnjph filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Fodpfxefz Ndye Ahnsph

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes Fodpfsf Aad Nsx Ahneph The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Fpjdpfxefz A H Do Ahnoh - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. Fpsdpfx Ahsflrc Sjnsh First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing solutions to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton’s 40 years of expertise in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It allows processing with up to 8 different chemicals and a variable number of tanks, depending on the application. All tanks are made of 316 stainless steel and are insulated. The number of tanks and heated tanks is defined based on your process steps. ✅Heating in the tanks is provided by gas heat exchangers. All process cycles, times, and temperatures can be monitored and adjusted via the PLC touchscreen. ✅Any system errors are displayed on the control panel. Automatic float sensors are installed in the tanks – if the tanks have insufficient water or chemicals, the system stops automatically. Fluid levels are managed automatically by transferring between tanks, ensuring operational safety. ✅There is a drain pan beneath all tanks made of 316 stainless steel. The tanks themselves are produced from 2 mm thick 316 stainless steel. Materials undergo penetration testing and are sealed with argon welding. In-tank grates protect pumps from debris. The inside of the cabin is made from 304 stainless steel sandwich panels and the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm, constructed from polyurethane-filled stainless steel panels. PPT ring pipes and nozzles ensure a long service life. Fpjdjfggcwspfx Ahnoh ✅With the steam extraction fan, steam diffusion from the system into the workspace is prevented. The washing system doors are tank-type and sealed with silicone gaskets. The moveable washing platform inside the cabin travels back and forth to wash materials. Hoses are supported by a mobile carrier system. Separate pumps are provided for each process and a dedicated waste pump is used to discharge liquids from the tanks. The discharge pump is connected to the chemical waste tank. ✅Manual application guns are available for each process step, and the system features a manual pre-treatment mode. Drip time and process duration can be set via the PLC control panel. The drip time applies to manual applications.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth Fedpfx Ahshbyr Sjnoph l) Pressurized sanding booth (with 2 suction benches)

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying 2 pcs. Edge sanding aggregates tiltable. Fedsim Eyxspfx Ahnjph Material is immediately dry and useable ! Very good condition. Available immediately. Possible to test.

Year of construction: 2013, condition: ready for operation (used), I sell the spraying automat Renojava yr. 2013 Working width 80mm Element thickness up to 80mm Feeding bands length: 1,60 + 2,60m Technology break 200mm / Element length min. from 300mm. Total length: 4,40m Fodeh Ibivepfx Ahneph Ring arm system for guns from each side Pump included. Feeding system with motors. Good condition. Available immediately.