Used Paint Mist Extraction System for sale (36,909)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm Hedpfx Ajiau Tzjd Rjfg lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Hsdpfxjvvizke Ad Refg

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Hfodpfxst Rv Txj Ad Reg Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Without switch box

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Hfodpfsbumr Sjx Ad Rsg Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Hfodewydgzspfx Ad Rog

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: Hodpfx Aewv T R Uod Refg - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Hfodpfxowv Nbcs Ad Reg Power consumption: 2.3 A Weight: approx. 120 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version - immediately available - Hjdpfxswrnype Ad Rsfg

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Length: 3000 mm 2x cardboard filter Pint stop filters Filtration capacity: approx. 11,000 m3/h Hodpfx Adsy Rmyxo Refg Motor power: 2.2 kW CE mark Dimensions: 335x150x238 cm (H)

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, Hfjdpfxou T Hrps Ad Rsg motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 2011, functionality: fully functional, Dry extraction wall Spänex TAW kompakt 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray booth control with touchscreen 2 x 2.0 kW drive power Hsdpfxjxltruj Ad Refg 6000 m³/h air volume flow Year of manufacture: 2011 From joinery closure / retirement, in VERY GOOD CONDITION From joinery workshop Includes all piping, explosion-protected lighting and documentation

Condition: excellent (used), Servatechnik extraction Hfodpfxsx Nbnns Ad Reg

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) Hodpfxjy Nikkj Ad Refg filtration capacity 15,000 m3/h year of production 2022 CE marking

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,367 net. Sturdy, galvanized steel sheet construction. Work surface equipped with a special folded cardboard filter, an additional post-filter, and a filter cassette for floor-level extraction. All filters are easily and quickly replaceable. The built-in radial fan, explosion-proof design, features an impeller made from steel sheet. The explosion-proof drive motor (EEx nA II) is mounted outside the airflow and drives the fan directly. The supply cable is 10 meters long and a plug-socket switch combination with integrated on/off switch is included. Attention! The switch is not explosion-proof and is only suitable for use outside of explosion-hazardous areas. The fan outlet is located at the top. The air outlet is directed vertically upward. Hedoy Ehlropfx Ad Rsfg This spray mist extraction wall complies with the latest regulations. Designed for installation in paint shops in zone 2, where the average calculated concentration of flammable solvents is limited to less than 25% of the lower explosion limit. Technical specifications: - Max. air volume: 3,500 m³/h - Exhaust connection: 300 mm - Work surface: 2,000 x 1,000 mm - Required space: 2,600 x 920 x 1,420 mm (H) - Motor: 1.50 kW, EEx nA II T3, IP 55, 1,500 rpm, B5, 400 V, 50 Hz - ATEX marking: Ex II 3 G - Sound pressure level: 75 dB(A) - Weight: 220 kg - Fan: left - Folded cardboard filter: 1,000 x 2,000 mm – 1 pc - Folded cardboard filter 1,000 mm wide (no. 2072091295) – each as a 10m pack, flame-retardant according to DIN 53438 F1/K1, cut length = 25 folds per 1,000mm - 2072090518 filter cut for Paint-Star – 1 pc - 2072091473 cassette filter for Paintstar – 1 pc Storage location: Rieth

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Hfodpey Dpfwefx Ad Rjg Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system Hfedpfx Asyxm Ekjd Rsg

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Hsdpfsyuf S Hex Ad Rjfg Edge extraction with fan Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Hfsdpfx Adeyvkwfs Rjg Price: 3500.- Location: 1230 VIENNA

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Length: 4000 mm Hodpfeyh E Hnex Ad Rofg 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW CE marking

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800 Hedpfxeuyh R As Ad Rjfg

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Hfodpfxoxz Ache Ad Rog Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: ready for operation (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 200468, overall weight: 40 kg, total length: 560 mm, total width: 480 mm, total height: 450 mm, The device is used for the isolation and purification of nucleic acid from clinical samples and not only. The system is equipped with heating and UV disinfection functions. It can simultaneously perform isolation for 24 samples. It is characterized by a short extraction time and high extraction efficiency. The extraction process is fully automated, it uses the magnetic bead method. The device consists of mechanical parts (including a vibration module, a magnetic rod module, a magnetic sleeve module and an entrance and exit door module) and electrical parts (including a control module and a heating module). Hfodpownny Ijfx Ad Rsg

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Good working condition. Please check out our other listings as well. Hedpfx Aoupv U Hod Refg

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hsdpfx Aowrr Htod Rjfg Lukas van Rossum

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter Hsdpfxoy R S E He Ad Rofg -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg